···
Log in / Register

What oil should be used for the Audi Q5 transmission fluid

4 Answers
GiselleFitz
07/29/25 6:46am
Audi Q5 can use HZHAT HuiTe DSG transmission oil. The following is a detailed introduction about HZHAT HuiTe DSG transmission oil: 1. Features: HZHAT HuiTe transmission oil has excellent shear stability and good low-temperature fluidity, ultra-high viscosity index and outstanding friction durability, which can provide consistent and efficient shifting performance for the transmission, enhancing driving comfort. 2. Advantages: It has good anti-wear properties and steel-to-steel friction coefficient, improves the clamping force of the steel belt, and effectively enhances the shifting performance of the transmission.
Was this review help?
10
0
Share
Maureen
08/12/25 10:48pm
I've been driving an Audi Q5 for several years, and choosing the right transmission fluid is crucial. My car is a 2015 model, and before changing the oil, I specifically checked the manual, which recommends using Audi's genuine G 055 025 A2 synthetic oil. Later, I tried using a cheaper alternative brand, but after just a week, I noticed the gear shifts were a bit rough, so I quickly switched back to the genuine oil. Now, I change it every 60,000 kilometers, and it's much smoother. I suggest you don't skimp on this expense—using the wrong oil can easily damage the transmission valve body, and repairs can be even more expensive. If you're doing it yourself, remember to work on a cold engine—safety first. Also, regularly check the fluid color; if it turns black, it's time for a change. This habit can significantly extend your car's lifespan.
Was this review help?
8
2
Share
Expand All
DiNora
10/04/25 4:22am
I've been repairing cars for over a decade, and the transmission fluid for an Audi Q5 must match the exact specifications. For most models like the 8-speed automatic transmission, it's best to use ZF Lifeguard 8 or directly purchase Audi-certified G 055 025 A2. Never use the wrong type, such as substituting with manual transmission fluid, as it can cause hydraulic failures leading to complete transmission system breakdown. When changing the fluid, always use a new filter and seals to prevent oil leaks. Check it every 50,000 to 70,000 kilometers. I've seen customers who tried to save money by using the wrong fluid end up with severely worn gear components that cost a fortune to repair. Always verify the Audi logo on the packaging before buying—don't rely on guesswork, or a small issue could turn into a major problem.
Was this review help?
1
0
Share
Expand All
LeMaximus
11/17/25 5:57am
Bro, as a car enthusiast, I found that choosing the right transmission fluid for my Audi Q5 mod is a game-changer. Using synthetic options like Red Line D6 ATF makes acceleration smoother and enhances the kick-down feel. Remember to check the fluid level every 40,000 km—just a simple drip test on paper to ensure viscosity isn't cloudy. Picking the wrong one dulls responsiveness, so never skip routine maintenance; it'll elevate your long-term driving experience to another level.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What to Do When the Gear Won't Come Out?

If the gear won't come out, you must go to a 4S shop or a professional auto repair shop to have professionals inspect and repair it. The reasons why the gear won't come out include: 1. At the rear of the transmission, there are two connecting rods. If the screw is loose or falls off, the gearshift lever inside the car can move, but the movement won't be transmitted to the transmission, so the gear won't come out; 2. The clutch pressure plate is damaged and cannot disengage, making it difficult to shift out of gear; 3. The gearshift cable is broken. If the gearshift cable is broken, the response of the gearshift lever cannot be transmitted to the transmission actuator. The transmission mainly refers to the car's transmission, including manual and automatic types. The manual transmission mainly consists of gears and shafts, achieving speed and torque changes through different gear combinations, while the automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque changes through hydraulic transmission and gear combinations.
3
1
Share

What to Do If There's a Rust Hole in the Vehicle's Metal Sheet?

If there's a rust hole in the vehicle's metal sheet, the rusted area needs to be cut out and then re-welded or treated with anti-corrosion measures. The materials used for automobile bodies can generally be divided into two major categories: 1. Metal materials, including heavy metals such as steel plates and cast iron, as well as light metals like aluminum, magnesium, titanium and their alloys, and foam metals; 2. Non-metal materials, including engineering plastics, fibers, resins, glass, rubber, non-metal foam materials, and non-metal composite materials. With the advancement of automotive technology, in addition to metal and non-metal materials, composite materials and nanomaterials will also see widespread application in future automotive materials.
1
4
Share

How to Replace the Battery in an Audi Q3 Remote?

Audi Q3 remote battery replacement steps: 1. Flip the car remote key to the back side, where you can see the back cover divided into two parts. The side with the keyring is where the battery is located under the back cover; 2. Turn the key sideways to look for a gap, usually near the keyring and along the side of the key. However, the back cover cannot be removed by hand; 3. Use a flathead screwdriver to insert into the gap and apply slight upward force to lift part of the back cover. Since force is applied at one point, the entire back cover cannot be removed at once; 4. Move the screwdriver along the gap to both sides to gradually widen the gap; 5. The entire back cover can then be pried open; 6. Push the back cover towards the closed side by hand to remove it, revealing the battery inside; 7. A protruding clip can be seen on one side of the battery. Press the clip part of the battery, and the battery will expand. Slide the battery to the other side to remove it; 8. Insert the new battery into the car remote key in the reverse order of removal, paying attention to the positive and negative poles to avoid installing the battery in reverse.
7
5
Share

What transmission does the Axela use?

The Axela is equipped with the Skyactiv-Drive 6-speed automatic transmission. The Axela comes with two naturally aspirated engines featuring Skyactiv technology: a 1.5L and a 2.0L, delivering maximum power outputs of 117 horsepower and 158 horsepower respectively, with peak torques of 148 Nm and 202 Nm. The transmission system is paired with either a 6-speed manual or a 6-speed automatic transmission. For suspension, the new model adopts a front MacPherson strut independent suspension and a rear multi-link independent suspension combination. The sedan version of the Axela has body dimensions of 4582mm in length, 1795mm in width, and 1458mm in height, while the hatchback version measures 4461mm in length, 1795mm in width, and 1474mm in height. Both versions share the same wheelbase of 2700mm.
14
4
Share

What does the D in an automatic car mean?

In an automatic transmission car, D stands for Drive, which is used for forward movement on regular road surfaces and is one of the most commonly used gears. It automatically adjusts to a comfortable working state based on road conditions and vehicle speed. Nowadays, more and more cars are equipped with automatic transmissions, commonly known as automatic cars. Automatic cars typically have P, N, R, and D gears. N stands for Neutral, which functions similarly to the neutral gear in manual transmissions, used for temporary parking. Another purpose is when the engine suddenly stalls while driving; if you need to restart the engine while moving, you must shift into N gear. P stands for Park, used when the engine is off and the car is stationary or parked. When the vehicle is stopped, you must shift into P gear to power off, remove the key, and lock the doors. R stands for Reverse, which functions the same as the reverse gear in manual transmissions.
11
5
Share

Do I need to retake Subject 1 when switching from C1 to C2?

Switching from C1 to C2 does not require retaking the exam, but you need to resubmit the application form and medical examination certificate. Passing score for Subject 1: The total time for the Subject 1 exam is 45 minutes. The exam consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 and a passing score of 90. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Specifications". Exam process: Follow the staff's arrangements and collect your driving school file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the exam area; No loud noise is allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in your bag); After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam area; Students who pass the exam will sign under the guidance of the staff at the exam exit and then leave the exam area; Students who fail the exam can leave the exam area immediately and wait for the driving school staff to notify them of the retake time.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.