What oil filter does the Changan CS75 use?

1 Answers
LaEmilia
07/30/25 10:25am
Changan CS75 uses the Bosch AF0255 oil filter. The oil filter, also known as the oil strainer, is used to remove dust, metal particles, carbon deposits, and soot impurities from the oil to protect the engine. Here is some relevant information about the oil filter: 1. It filters the engine oil to improve its cleanliness and lubrication. It supplies clean oil to the crankshaft, connecting rod, camshaft, turbocharger, piston rings, etc., for lubrication, cooling, and cleaning, thereby reducing engine wear, optimizing performance, and extending the lifespan of these components. 2. Experts recommend replacing the oil filter every time the oil is changed. The reason is that the contaminants in the old oil filter can reduce the viscosity and cleanliness of the new oil, affect the oil circulation speed, and also damage the engine.
Was this review help?
14
4
Share
More Forum Discussions

How much fuel is consumed by idling with the air conditioning on for one hour?

Idling with the air conditioning on for one hour consumes 1-2L more fuel than driving normally without the air conditioning. In summer, when the air conditioning is turned on, the compressor needs to work to provide cooling. The air conditioning compressor cannot operate on its own; it relies on the engine to drive it, which consumes some of the engine's power. This is why using air conditioning for cooling affects fuel consumption. Here are some methods to save fuel when using the air conditioning: 1. If the car is parked outdoors in summer: It's best to open the windows before turning on the air conditioning. Avoid immediately turning on the cooling function; instead, set the fan to maximum speed to accelerate ventilation and wait for the hot air inside the car to dissipate before turning on the cooling. 2. Adjust the air vents: Pointing the vents upward improves cooling efficiency through physical principles. 3. Avoid setting the air conditioning temperature to the lowest for extended periods: A large temperature difference between the inside and outside of the car can increase fuel consumption and also affect the health of the passengers.
1
0
Share

What to Do When Encountering a Test Car with Difficult Gear Shifting?

If you encounter a test car with difficult gear shifting during the Subject 2 driving test, you can only try a few more times. If there is an examiner sitting beside you, you can ask for help or report the issue. Generally, if an unexpected situation occurs, the examiner will provide some hints. Here is some extended information about the driving test: 1. No Deduction: According to the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses', re-shifting gears when starting the car does not result in a deduction. However, if you shift out of gear and then back into gear while the car is moving, you will be deducted 100 points and directly deemed as failing. Therefore, if you find the car difficult to shift gears before it moves, you can try a few more times, as long as you ensure the gear is engaged before releasing the clutch to start. 2. Report the Issue: Test cars are usually easier to drive than training cars, so encountering difficulty in shifting gears is relatively rare. If you find it hard to shift gears, first check if the clutch is fully depressed. If everything is normal and you still can't shift gears, you can report it to the examiner.
12
5
Share

Does the Charcoal Canister Need Regular Replacement?

Generally speaking, the charcoal canister does not need to be replaced frequently. It only requires replacement if the interior becomes clogged or if carbon particles leak out. Causes of charcoal canister damage: Reasons for replacing a damaged charcoal canister: prolonged usage over many years. Another reason: overfilling the fuel tank after the pump nozzle automatically shuts off, which can force excess fuel into the canister and damage it. Therefore, once the fuel pump nozzle clicks off, do not attempt to add more fuel. Function of the charcoal canister: The charcoal canister is typically installed between the fuel tank and the engine. Since gasoline is a highly volatile liquid, the fuel tank often contains vapor at normal temperatures. The fuel evaporation emission control system is designed to direct these vapors into the combustion process and prevent them from escaping into the atmosphere. The activated charcoal canister storage device plays a crucial role in this process.
10
5
Share

What is letin car?

letin is a five-door, four-seater pure electric microcar. Below is an introduction to related content: Brand Introduction: Established in 2008, it is an automotive group with businesses covering R&D and manufacturing of complete vehicles and components/automotive service trade/comprehensive mobility services. It possesses modern factories integrating automation, digitalization, and environmental protection, with product lines including new energy passenger/commercial vehicles and traditional energy vehicles across all industry categories. Business Scope: The business covers R&D and manufacturing of complete vehicles and components, automotive service trade, and comprehensive mobility services. With 5,000 employees, it has over 3,000 primary stores and more than 10,000 secondary stores globally, growing into one of China's most promising complete vehicle automotive groups.
10
4
Share

How often should the catalytic converter be replaced?

The catalytic converter should be replaced every 30,000 kilometers of driving, or as specified in the vehicle's maintenance manual. The catalytic converter is installed at the front section of the exhaust pipe, with an oxygen sensor positioned before and after it. The front oxygen sensor primarily measures the oxygen content in the exhaust and sends this data to the ECU (Engine Control Unit), which then adjusts the air-fuel ratio of the engine accordingly. The rear oxygen sensor checks whether the catalytic converter is functioning properly. If the data from both oxygen sensors sent to the ECU are similar, it indicates that the catalytic converter has failed, and a warning light will illuminate on the dashboard.
7
0
Share

What Causes the Steering Wheel to Be Misaligned After a Wheel Alignment?

Reasons for the steering wheel being misaligned after a wheel alignment: 1. Excessive wear of the steering gear; 2. Excessive clearance in the steering tie rod; 3. The tie rod is offset to one side; 4. Changes in the wheel alignment values; 5. Uneven wear of the front tire treads; 6. Uneven tire pressure on both sides. Functions of wheel alignment: 1. Keeps the car driving straight stably and makes steering easier; 2. Ensures the steering wheels can automatically return to the correct position after turning; 3. Reduces wear on tires and steering components during driving; 4. Maintains the optimal driving angle between the tires and the car body, improving grip while ensuring comfort.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.