What off-road vehicles does FAW-Volkswagen have?

What is the correct way to open a car door?

Correct methods for opening car doors are as follows: 1. Staged door opening: When exiting the vehicle, first push the door open 15 to 20 centimeters to create a gap, then fully open it after confirming safety. 2. Dutch Reach method: Use the hand farther from the door to open it, meaning right hand for left-hand drive vehicles and left hand for right-hand drive vehicles. Precautions for opening car doors include: 1. Before opening the door, carefully check the rear situation through the rearview mirror. The driver should slightly open the left door to observe, which also serves as a reminder for nearby cyclists. 2. If there are cyclists passing by outside the car, it's best to wait patiently until they have passed before opening the door.

9

5

Share

Does the Wildlander have a power tailgate?

The new Wildlander is equipped with a power tailgate. Definition of power tailgate: A power tailgate allows the trunk to be opened and closed via button control. The power tailgate adds two axial drive rods to a conventional tailgate, enabling the trunk to open or close with a press of the in-car switch or remote key. Setting up the power tailgate: Manually or automatically open the trunk lid to the desired height and hold it in that position. Press and hold the button on the trunk lid for about 4-5 seconds, and the vehicle's computer will automatically store the memory of the desired opening position. After storage, there is usually a beep prompt, and the next time it opens, it will rise to the specified height. For some models, resetting the power tailgate requires professional technicians at a 4S dealership to restore it, depending on the specific model.

14

4

Share

Should the AC Be Turned On for Car Air Conditioning Heating?

When using the car air conditioning for heating, you should not turn on the AC. The AC button activates the compressor, which pressurizes the refrigerant (Freon). Here is some relevant information: 1. How car air conditioning heating works: It primarily utilizes the heat from the car's coolant circulation to maintain the temperature inside the car. During this process, the compressor does not work, and you only need to adjust the fan speed. Turning on the AC may lead to unnecessary fuel consumption. 2. How to use car air conditioning for heating: Simply adjust the fan speed button to blow warm air. This warm air is generated by utilizing the car's internal heat cycle, transferring the heat dissipated by the radiator into the cabin without increasing any fuel consumption.

15

3

Share

How to Determine if the Clutch Flywheel is Damaged?

Here are common symptoms of a damaged clutch flywheel: 1. Unstable vehicle starting: The vehicle cannot start smoothly due to vibration during clutch engagement. 2. Difficulty in starting the car: When starting the car, the clutch pedal needs to be lifted very high before the car can move, and it may only start with difficulty after the pedal is fully released. 3. Lack of acceleration power: The vehicle speed does not increase with the rise in engine RPM, resulting in poor driving performance. 4. Clutch abnormal noise: There is abnormal noise when pressing the clutch pedal during engine idle, and the noise disappears when the pedal is released. Sometimes, abnormal noises occur regardless of whether the clutch is engaged or disengaged.

8

4

Share

How to Use a Paint Film Measuring Instrument?

The main methods for using a paint film measuring instrument are as follows: 1. Magnetic Thickness Measurement: Suitable for measuring the thickness of non-magnetic coatings on magnetic substrates, such as steel, silver, and nickel. This method offers high measurement accuracy. 2. Eddy Current Thickness Measurement: Suitable for measuring the thickness of non-conductive coatings on conductive metals. The accuracy of this method is lower than that of the magnetic method. 3. Ultrasonic Thickness Measurement: This method is less commonly used for measuring coating thickness, and only a few manufacturers abroad produce such instruments. 4. Electrolytic Thickness Measurement: This method is not non-destructive, as it requires damaging the coating, and generally offers lower accuracy. 5. Radiometric Thickness Measurement: Instruments using this method are very expensive and are typically used in special applications.

1

2

Share

When to Use the S Gear in Automatic Transmission?

S gear is the sports mode of a car, typically used for climbing slopes and rapid acceleration to overtake. It can also be used during high-speed driving, and the high engine RPM in sports mode can help remove carbon deposits from the engine. The gears in an automatic transmission car include: 1. L gear: This is the low gear, which limits speed. When engaged during uphill driving, it maintains a state of high RPM and low gear. 2. S gear: This is the sports mode, allowing the transmission to shift freely. 3. D gear: This is the drive gear, used for forward motion of the car. 4. N gear: This is the neutral gear, used during brief stops. 5. P gear: This is the parking gear. 6. R gear: This is the reverse gear, used when backing up the car.

19

1

Share

What off-road vehicles does FAW-Volkswagen have?

What is the correct way to open a car door?

Does the Wildlander have a power tailgate?

Should the AC Be Turned On for Car Air Conditioning Heating?

How to Determine if the Clutch Flywheel is Damaged?

How to Use a Paint Film Measuring Instrument?

When to Use the S Gear in Automatic Transmission?

What does gdit mean?

What Preparations Are Needed Before Learning to Drive?

Where is the power steering pump located?

Where is the turbocharger installed?