What off-road vehicles does BAIC have?

What to Do When the Tiida's Air Conditioning Is Not Cooling?

Solutions for the Tiida's air conditioning not cooling: 1. Add refrigerant; 2. Replace the air conditioning flap; 3. Clean the air filter and screen. Functions of the air conditioning: 1. Filter the air entering the cabin; 2. Absorb moisture from the air; 3. Maintain air cleanliness and prevent bacterial growth; 4. Prevent window fogging; 5. Adjust cabin temperature. The Tiida is a compact car under Dongfeng Nissan, with body dimensions of 4393mm in length, 1766mm in width, and 1539mm in height, and a wheelbase of 2700mm. The Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90 kW and a maximum torque of 155 Nm, paired with a 5-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.

15

2

Share

How to Avoid Crossing the Line in Right-Angle Turns?

Maintain a moderate speed as excessive speed makes it difficult to control the vehicle, increasing the likelihood of cutting corners or crossing lines. Here are the steps to successfully navigate a right-angle turn: 1. Before entering the turn, position the car closer to the opposite side of the turn direction. For instance, when making a right turn during a test, keep the car near the left side of the lane without crossing the left boundary line. 2. As you slowly enter the turning zone, focus your gaze on the right-side mirror. Once the mirror passes the corner line by approximately 2-3cm, swiftly turn the steering wheel all the way to the right. Speed is crucial in this maneuver. 3. After the right wheels have cleared the corner, begin straightening the steering wheel while shifting your focus to the road ahead.

4

Share

Is it necessary to register at the vehicle management office when replacing an engine?

Replacing an engine requires registration at the vehicle management office. The following are situations where motor vehicles need to be registered: Changing the body color; replacing the engine; replacing the body or frame; replacing the entire vehicle due to quality issues; changing the use nature of the vehicle from commercial to non-commercial or vice versa; the vehicle owner's residence moving out of or into the jurisdiction of the vehicle management office. For replacing the entire vehicle due to quality issues, a motor vehicle safety technical inspection certificate must also be submitted, except for imported vehicles through customs and vehicles exempted from safety technical inspections as recognized by the national motor vehicle product authority. For replacing the engine, body, or frame, a motor vehicle safety technical inspection certificate must also be submitted. Replacing the engine requires registration at the vehicle management office. The first step in the modification process is to apply for modification at the vehicle management office. The owner needs to bring their ID card, vehicle registration certificate, motor vehicle registration certificate, and proof of the new engine. At the vehicle management office, the staff will issue a vehicle inspection application and take an imprint of the new engine number. The following is the registration process for replacing an engine: Required materials include the original ID card, a copy of the ID card, the vehicle's registration certificate, the motor vehicle registration certificate and its copy, etc. Prepare relevant materials for the engine, including proof of engine replacement (if imported, an import document is also required), an imprint of the engine number (some engine numbers can be imprinted), etc. Fill out the "Motor Vehicle Modification Registration Application Form" at the vehicle management office. After completing the relevant procedures, proceed to inspect the vehicle. Vehicle inspection is not open to outsiders; only internal staff can inspect the vehicle. Finally, obtain a vehicle inspection certificate, complete the relevant procedures, and receive a new registration certificate.

9

1

Share

What engine does GAC Trumpchi use?

GAC Trumpchi is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169 hp, a maximum power of 124 kW, and a maximum torque of 265 Nm, paired with a 6-speed manual transmission. Taking the 2021 GAC Trumpchi GS5 as an example, it belongs to the midsize SUV category, with body dimensions of 4695mm in length, 1885mm in width, and 1726mm in height, and a wheelbase of 2710mm. The GAC Trumpchi GS5 features a MacPherson strut front suspension and a multi-link independent rear suspension, available in both two-wheel drive and four-wheel drive systems. For the interior, the GAC Trumpchi GS5 offers two styles, black and brown, showcasing a fashionable taste. The dashboard and door panels wrapped in soft materials are finely crafted with a delicate touch.

3

Share

Where is the rearview mirror heating switch on the new Mazda 3?

The rearview mirror heating switch on the new Mazda 3 is located below the vehicle's air conditioning adjustment area, to the right of the hazard warning light button. The button features a rectangular block with three upward-pointing curved lines. Simply press the button to activate the function, provided the vehicle is powered on. Rearview mirror heating is particularly useful in rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rain or fog, eliminating the need for frequent manual wiping and reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment knob—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as there is an adjustment button on the driver's side. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature (usually between 35-60°C) within minutes. Heat is then emitted from both left and right rearview mirrors. As the temperature rises, water droplets on the mirror surface evaporate, and fog gradually disappears, effectively defrosting and de-fogging the mirror. However, in heavy rain, the effect may be less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume significant power. Ensure the vehicle is running when using this function to avoid draining the battery, which could prevent the car from starting. Other methods for defogging rearview mirrors include: Opening windows slightly to allow air circulation between the inside and outside of the car, reducing temperature differences and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.

10

3

Share

Does the Tank 300 have a diesel version?

The Tank 300 does not have a diesel version. The Tank 300 is the first "intelligent luxury off-road SUV" under the WEY brand, built on Great Wall Motors' intelligent professional off-road platform. It combines off-road capability with luxury and comfort, creating a new category in the off-road SUV market. Below is an introduction to the Tank 300: 1. The Tank 300 is equipped with an Infinity brand audio system featuring QuantumLogic surround sound technology, and the speaker grilles are made of metal, enhancing both the luxurious feel and protection. The electronic gear shifter is ergonomically designed to provide the most comfortable driving experience, whether for static handling or dynamic driving. 2. In terms of safety, the Tank 300 features intelligent full-speed ACC cruise control, intelligent lane keeping, the latest 9.3-generation ESP system, intelligent traffic sign recognition, rollover prevention RMI, OPW front and rear integrated side airbags, and CLT dynamic locking dual pre-tension seatbelts. 3. The Tank 300 is powered by a 2.0T direct-injection turbocharged gasoline engine, delivering a maximum power of 167kW and a peak torque of 387N·m. It is paired with a ZF 8AT transmission, ensuring stronger obstacle-crossing, hill-climbing, and off-road recovery capabilities.

2

Share

What off-road vehicles does BAIC have?

What to Do When the Tiida's Air Conditioning Is Not Cooling?

How to Avoid Crossing the Line in Right-Angle Turns?

Is it necessary to register at the vehicle management office when replacing an engine?

What engine does GAC Trumpchi use?

Where is the rearview mirror heating switch on the new Mazda 3?

Does the Tank 300 have a diesel version?

What is the method for resetting the tire pressure on the 2019 Magotan?

How to Tell if a Tire is a Tubeless Tire?

Why does the Focus have power but fail to start?

How to Turn On the Ambient Lighting in a 2020 Audi A4?