What octane rating fuel should be used for the Q5?

1 Answers
MacHarper
07/30/25 4:32am
Audi Q5 uses 95 octane gasoline. The Audi Q5 is equipped with a turbocharged engine, which has relatively high requirements for gasoline. The gasoline octane rating refers to the octane number, which is the anti-knock performance. The higher the anti-knock performance of the gasoline, the higher the octane rating. Details about the Audi Q5 are as follows: 1. Powertrain: The entire lineup is equipped with a 3.0T V6 supercharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 200KW and a maximum torque of 400N・m. 2. The Audi Q5 features a full-time four-wheel-drive system, with both front and rear suspensions being multi-link independent suspensions. 3. The Audi Q5 is an imported vehicle, positioned as a mid-size SUV.
Was this review help?
1
1
Share
More Forum Discussions

Which country is the Jeep Compass produced in?

Jeep Compass is an American vehicle. This model excels in the following aspects: First: Exterior design. The Compass features a trendy front fascia design, from the signature silver seven-slot grille that inherits the family lineage, to the black inner bezel with chrome fog light surrounds and smoked taillights, down to the dynamic five-spoke 18-inch aluminum alloy wheels. Second: Interior. The Compass' cabin faithfully continues Jeep's American styling with straightforward, clean lines and excellent practicality. After the 2014 facelift, design-forward two-tone seats and premium soft-touch interior materials previously reserved for top trims were introduced to the 2.4L Comfort trim, enhancing comfort. Third: Powertrain. It boasts advanced engine technology delivering robust power, quick acceleration, and stable high-speed performance. Fourth: Fuel efficiency. The 2014 Jeep Compass offers 2.0L and 2.4L engine options. Opting for the 2.0L variant paired with the fuel-efficient CVT transmission prioritizes economy and operating costs, achieving just 8.7L/100km fuel consumption.
13
5
Share

How much fuel does the 2012 LaCrosse 2.4 consume?

The 2012 LaCrosse 2.4 consumes 11.7 liters per 100 kilometers. The constant-speed fuel consumption refers to the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. The 2012 LaCrosse is a mid-size 4-door 5-seater sedan under SAIC-GM Buick, with a length, width, and height of 5000mm, 1858mm, and 1497mm respectively, a wheelbase of 2837mm, a top speed of 205 kilometers per hour, and equipped with a 6-speed automatic manual transmission. The 2012 LaCrosse 2.4's engine has a maximum power of 137 kilowatts, a maximum power speed of 6200 revolutions per minute, and a maximum torque of 240 Newton meters. The tire specifications are 225/55R17, with MacPherson independent suspension in the front and multi-link independent suspension in the rear.
18
3
Share

What engine does the second-generation Fit use?

The second-generation Fit uses different engines depending on the model, specifically: 1. Equipped with a 1.3-liter inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or 5-speed automatic transmission, delivering a maximum power of 73kW and maximum torque of 127Nm; 2. Equipped with a 1.5-liter inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or 5-speed automatic transmission, delivering a maximum power of 88kW and maximum torque of 145Nm. The Fit is a hatchback launched by GAC Honda, featuring Honda's family-style front face design where the front grille integrates with the headlights, highlighting a sharp and cool look. The body side adopts a unique sharp blade-style dual waistline design, and the tension-filled rear styling is complemented by LED taillights, presenting a more premium texture. In terms of dimensions, the Fit measures 3900mm in length, 1695mm in width, and 1525mm in height, with a wheelbase of 2500mm.
11
0
Share

How to reset the tire pressure light on the 2018 Audi A3?

To reset the tire pressure light on the 2018 Audi A3, follow these main steps: 1. Use the central control screen. 2. Select "Vehicle." 3. Choose "Maintenance and Inspection." 4. Select "Tire Pressure Monitoring" and directly reset the tire pressure monitoring system. Below are some additional details: 1. Tire pressure should not be too high or too low. If the tire pressure is too low, the tires may experience wave-like deformation during high-speed driving, increasing the risk of a blowout. If the tire pressure is too high, the contact area between the tires and the road will decrease, reducing grip and affecting the car's handling. 2. Before driving on highways or long-distance routes, always check the tire pressure and inspect the tire surface for any damage. If the tire pressure warning light comes on and you know which tire is affected, you can inflate it. However, the tire pressure monitoring warning light will not turn off immediately after inflation; it will only go off after driving for a certain distance.
4
4
Share

What brand is ecsta tires?

ecsta is a tire brand under Kumho Tire, positioned as an ultra-high-performance series. Below are the specific details about ecsta tires: 1. ecsta tires are manufactured using Formula-Technology, ensuring a comfortable ride even at high speeds. By reducing noise, they provide a stable driving experience. The Ecsta series mainly includes the KU39C and KU28 models. The KU39C focuses on sportiness, while the KU28 emphasizes eco-friendliness and comfort. The wheel sizes range from 15 to 18 inches, with the KU28 offering an additional 15-inch size compared to the KU39C, making it more versatile. 2. Kumho Tire produces different types of tires tailored to various vehicle forms. The tires under this brand exhibit high performance, delivering excellent braking performance during emergency stops. 3. Key features of Kumho tires include: OEM fitment for mid-to-high-end German vehicles, ensuring quality; sports car-level driving experience with superb handling; quiet and smooth for ultimate comfort; and high-speed performance to unleash your speed and passion.
20
2
Share

What are the cities represented by license plate letter codes in Zhejiang Province?

Zhejiang Province license plate letter codes and their corresponding cities are: 1. Zhe A: represents Hangzhou City, Zhejiang Province; 2. Zhe B: represents Ningbo City, Zhejiang Province; 3. Zhe C: represents Wenzhou City, Zhejiang Province; 4. Zhe D: represents Shaoxing City, Zhejiang Province; 5. Zhe E: represents Huzhou City, Zhejiang Province; 6. Zhe F: represents Jiaxing City, Zhejiang Province; 7. Zhe G: represents Jinhua City, Zhejiang Province; 8. Zhe H: represents Quzhou City, Zhejiang Province; 9. Zhe J: represents Taizhou City, Zhejiang Province; 10. Zhe K: represents Lishui City, Zhejiang Province; 11. Zhe L: represents Zhoushan City, Zhejiang Province. License plates serve as identification and information registration for vehicles, with their primary function being to identify the vehicle's region of registration through the plate number, and to trace the vehicle's owner and registration information based on the plate.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.