What Octane Gasoline Should the Honda Fit Use?

2 Answers
OAaliyah
07/25/25 4:15am
Honda Fit uses 92 octane gasoline. The manufacturer requires the use of 92 or higher octane gasoline for the Fit when it leaves the factory, with the minimum fuel grade being 92 octane. The engine used in the Fit adopts the latest technology and can use 95 octane gasoline, but using higher-quality fuel does not significantly improve the car's fuel economy. Although the engine technology is relatively mature, it is still advisable to avoid using lower-octane fuel. Using low-octane fuel in a car can cause engine knocking and damage, as well as harm the catalytic converter and oxygen sensor, thereby affecting fuel consumption. Long-term use of low-octane fuel can create a vicious cycle in the engine. At the same time, it is not recommended to use high-octane fuel either. Using high-octane fuel in the Fit not only does little to enhance the engine's power but may also negatively affect the car's performance. This is because high-octane fuel can lead to incomplete combustion in the engine, resulting in carbon deposits that interfere with the engine's normal operation.
Was this review help?
7
0
Share
LaLila
08/10/25 5:18pm
I've been driving the Honda Fit for a while, and it's clearly stated on the fuel cap—recommended to use 92 octane or higher gasoline. For daily driving, 92 octane is perfectly fine, economical and practical, saving a good amount on fuel costs. Actually, using 95 octane isn't a problem, but spending extra money doesn't make much sense since this car's engine compression ratio isn't that high; 92 octane is completely sufficient. I've driven over 50,000 kilometers, always using 92 octane, and the engine sounds crisp and powerful with good throttle response. Remember, the new car manual also recommends this, so don't be fooled by gas station promotions into using higher octane fuel.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What type of transmission does the Subaru Forester use?

Subaru Forester uses a CVT (Continuously Variable Transmission), which performs well in terms of shift smoothness and efficiency. This type of transmission is commonly used in Japanese automobiles. The Subaru Forester has body dimensions of 4560mm in length, 1780mm in width, and 1700mm in height, with a wheelbase of 2615mm. The exterior design of the Subaru Forester appears somewhat unconventional. Compared to the rugged and bold front ends of other SUVs, the Forester's wide and flat front end resembles that of a luxury sedan. The trapezoidal front grille design is conservative, and the nearly square headlight design is not particularly innovative, but it pairs decently with the two deep sheet metal lines on the engine hood.
12
5
Share

Is the Shuai Ke an MPV?

Shuai Ke is an MPV, a high-end compact business vehicle launched by Zhengzhou Nissan. In terms of appearance, this car adopts a family-style design, with straight waistlines that enhance its stability. Regarding dimensions, the car measures 4420mm in length, 1695mm in width, and 1825mm in height, with a wheelbase of 2695mm. As a business vehicle, the longer wheelbase provides more spacious interiors. In terms of power, the car offers two engine options: a 1.5L and a 2.0L naturally aspirated engine. The 1.5L engine is model 4A15, while the 2.0L variant is equipped with a Mitsubishi 4G94D engine.
4
5
Share

Where is the windshield washer fluid location in the Civic?

The windshield washer fluid location in the Civic is under the right front fender, and the washer fluid filler port is next to the right front fender. The owner can see it after opening the engine hood. Windshield washer fluid is frequently used, and when it runs out, it needs to be refilled; otherwise, it will affect the cleaning of the front windshield. The Civic is a compact car under Honda, with body dimensions of 4649mm in length, 1800mm in width, and 1416mm in height, and a wheelbase of 2700mm. The Civic is equipped with two engines: one is a 1.0-liter turbocharged engine, and the other is a 1.5-liter turbocharged engine. The Civic features a stylish and sleek design, with a flowing body line, and the hatchback appearance has undergone significant changes compared to the older model.
2
2
Share

What is the difference between a 3-cylinder and a 4-cylinder engine?

The difference between a 3-cylinder and a 4-cylinder engine lies in the number of cylinders: a 3-cylinder engine has three cylinders, while a 4-cylinder engine has four cylinders. The working principles of both 3-cylinder and 4-cylinder engines are as follows: 1. Compression stroke: The piston moves from the bottom dead center to the top dead center, with both the intake and exhaust valves closed; 2. Intake stroke: The piston is driven by the crankshaft from the top dead center to the bottom dead center, while the intake valve opens and the exhaust valve closes; 3. Exhaust stroke: The exhaust valve opens, and the piston moves from the bottom dead center to the top dead center, expelling exhaust gases as the piston rises; 4. Combustion and expansion stroke: Both the intake and exhaust valves close, the spark plug ignites, and the air-fuel mixture burns vigorously.
9
0
Share

Where is the radiator located in a Honda Fit?

Honda Fit's radiator is positioned in front of the driver's seat, near the area of the headlights. The function of the radiator is: when the engine's water temperature rises, the water pump circulates repeatedly to lower the engine's temperature, thereby protecting the engine. Taking the 2021 Fit as an example, its body dimensions are: length 4109mm, width 1694mm, height 1537mm, wheelbase 2530mm, fuel tank capacity 40L, and curb weight 1088kg. The 2021 Fit features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131PS, maximum power of 96kW, and maximum torque of 155Nm, paired with a continuously variable transmission.
3
4
Share

Can the Position Lights and Low Beam Headlights Be Turned On Simultaneously?

Position lights and low beam headlights cannot be turned on simultaneously. Generally, the vehicle's light switch does not allow both position lights and low beam headlights to be activated at the same time. Low beam headlights are used for illumination during nighttime driving. Vehicles also have high beam headlights, which provide longer illumination distance and higher brightness. Position lights do not serve an illumination purpose. Position lights are warning lights designed to alert other vehicles. They are located at the front and rear edges of the vehicle, and large trucks also have position lights on their roofs and sides. Position lights are installed along the edges of the vehicle's roof, indicating both the height and width of the vehicle. Safety regulations require that vehicles with a height exceeding three meters must be equipped with position lights, which are white at the front and red at the rear.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.