What Octane Gasoline Should a Family Sedan Use?

1 Answers
OBrody
07/30/25 8:45am
Mid-range sedans with a compression ratio between 8.5-9.5 should generally use 93 octane gasoline; sedans with a compression ratio greater than 9.5 should use 97 octane. Gasoline Octane Rating: This represents the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. The higher the octane rating, the stronger the anti-knock performance. Standard gasoline is composed of isooctane and n-heptane. Higher octane ratings are not necessarily better; the appropriate gasoline octane should be selected based on the engine's compression ratio. Gasoline Grade Categories: Gasoline has a high octane number (anti-knock combustion performance) and is classified into grades such as 90, 93, 95, and 97 based on the octane value. Gasoline is produced by refining various gasoline components obtained from petroleum refining, including straight-run gasoline components, catalytic cracking gasoline components, and catalytic reforming gasoline components, blended with high-octane components. It is primarily used as fuel for spark-ignition internal combustion engines in automobiles.
Was this review help?
19
4
Share
More Forum Discussions

What are the speed limit regulations for urban roads?

Urban roads are divided into ordinary urban roads and urban expressways. Ordinary urban roads typically have speed limits of 30-60 km/h, while expressways usually have speed limits of 80 km/h. The specific speed limits are subject to the road speed limit signs. Upcoming speeding penalty regulations: According to the new announcement from the Ministry of Public Security, the new traffic regulations will be implemented on April 1, 2022. The new regulations stipulate that exceeding the speed limit by less than 20% will not result in point deductions. Exceeding the speed limit by 20%-50% will result in 6 points deducted on highways and urban roads, and 3 points deducted on ordinary roads. Exceeding the speed limit by more than 50% will result in 12 points deducted on highways and urban roads, and 6 points deducted on ordinary roads. Dangers of speeding: When driving at high speeds, vehicles are often in a state of accelerating to follow or overtake other vehicles. Due to the close following distance, the driver's view is inevitably obstructed, leading to unclear observation and inaccurate judgment of the situation ahead, resulting in high levels of blind driving. Moreover, speeding significantly impairs the driver's vision, and the higher the speed, the more severe the vision impairment, making accidents highly likely.
1
4
Share

What engine does the Yuan EV use?

According to the official introduction from BYD Auto, the BYD Yuan EV New Energy is a pure electric compact SUV, so it is equipped with an electric motor and does not use a fuel engine. Here is some relevant information about the Yuan EV: 1. The Yuan EV New Energy uses a permanent magnet/synchronous electric motor, which comes in two versions: high power and low power. The high-power version of the Yuan EV New Energy has a maximum horsepower of 136 hp, a maximum power of 120 kW, and a maximum torque of 280 N·m; the low-power version has a maximum horsepower of 95 hp, a maximum power of 70 kW, and a maximum torque of 180 N·m. 2. The electric motor used in the Yuan EV New Energy adopts a front-mounted layout, which provides some space for the trunk. Its battery type is a ternary lithium battery, which has a relatively long lifespan and is less prone to failure. 3. According to BYD Auto's official introduction, the low-power version of the Yuan EV New Energy has a pure electric cruising range of 305 km, while the high-power version has a pure electric range of 410 km. 4. In terms of warranty, BYD Auto provides a six-year or 150,000-kilometer warranty for the entire vehicle of the Yuan EV New Energy and an eight-year or 150,000-kilometer warranty for the battery pack.
7
0
Share

How to Reset the Tire Pressure on the Latest Audi A3?

The method to reset the tire pressure on the latest Audi A3: First, turn on the ignition, then press and hold the tire pressure monitoring reset button. After hearing a "ding" sound, release the button. The tire pressure monitoring system will then store the current normal tire pressure data and automatically clear the previous data. Finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Tire pressure reset is an operation performed to reset the tire pressure monitoring system after addressing any tire pressure issues. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, the tires should be inspected and the pressure adjusted. Tire pressure monitoring not reset: If the tire pressure is not reset promptly after inflating the tires, the system will continue to display the previous data, causing the tire pressure warning light to remain on. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire valve. If the sensor is damaged during driving, such as by hitting a curb, the tire pressure warning light may also illuminate. In the case of sensor damage, the only solution is to replace it with a new one.
13
4
Share

What is the tire pressure for Tesla?

After ECU remapping, the owner's requirements for fuel quality will become higher. Using low-quality gasoline can damage the vehicle. There are also higher temperature requirements. After ECU remapping, the engine operates at an overclocked frequency, and without an excellent cooling system, it can affect the engine's lifespan. It consists of a microcontroller, memory, input/output interfaces, analog-to-digital converters, shaping circuits, drivers, and other large-scale integrated circuits. ECUs generally have self-diagnosis and protection functions. The recommended standard tire pressure for Model S is 2.9 bar/42 PSI (21"), 3.1 bar/45 PSI (19"). For Model 3, the recommended standard tire pressure is 2.9 bar/42 PSI. For Model X, the recommended standard tire pressure is 2.9 bar/42 PSI. For Model Y, the recommended standard tire pressure is 2.9 bar/42 PSI. It's important to note that under cold tire conditions, the normal tire pressure ranges from 2.7 to 2.9 bar; as the temperature rises or during driving, the tire pressure can increase to 2.9 to 3.1 bar, which is normal. A tire pressure of 2.9 bar is normal for Tesla. Tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a crucial role in the performance and power of the car. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance.
18
0
Share

How often should the Q5 spark plugs be replaced?

Q5 spark plugs should be replaced approximately every 30,000 kilometers. It is recommended to follow the owner's manual for replacement, and you can refer to the following maintenance standards: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one, and check for any leaves, dust, or debris on the outside during removal, ensuring everything is cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage wires in the firing order and secure the cover. What happens if spark plugs fail: Damaged spark plugs can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, affecting the vehicle's normal operation. Severe spark plug erosion, such as pitting, damage, or melted electrodes, indicates that the spark plugs are ruined and should be replaced.
15
5
Share

Can I renew my driver's license in advance if it is about to expire?

You can renew your driver's license in advance if it is about to expire. Article 57 of the "Traffic Regulations Penalty Rules": The driver of a motor vehicle shall apply for renewal at the vehicle management office of the place where the motor vehicle driver's license was issued or at a vehicle management office outside the place of issuance within 90 days before the expiration of the motor vehicle driver's license. If the driver's license expires, the traffic police will impose a fine if caught, but no points will be deducted. There is a latest deadline for renewing the driver's license. If it has expired for less than one year, you can renew it according to the normal process; if it has expired for one to three years, the license will be revoked, and you can regain it by passing the subject one exam; if it has expired for more than three years, the license will be canceled. Article 57 of the "Traffic Regulations Penalty Rules": The driver of a motor vehicle shall apply for renewal at the vehicle management office of the place where the motor vehicle driver's license was issued or at a vehicle management office outside the place of issuance within 90 days before the expiration of the motor vehicle driver's license. When applying, the applicant shall fill out the application form and submit the following documents and certificates: the identity certificate of the motor vehicle driver, the motor vehicle driver's license, and a medical certificate of physical condition issued by a county-level or higher medical institution or a military medical institution at the regiment level or above. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate of physical condition issued by a specialized medical institution designated by the provincial health authority shall be submitted. Materials required for renewing the driver's license: original ID card and a copy, a qualified medical examination form from a hospital designated by the vehicle management office, three one-inch white-background color photos, a completed driver's license renewal application form, and the fee. The photos and medical examination certificate required for renewal can be brought by yourself. If you are worried that they may not meet the requirements, you can handle them directly at the traffic police station's license office to avoid delays. Relevant matters for renewing the driver's license upon expiration: About renewal: For the annual review and renewal of the driver's license upon expiration, the old driver's license must be surrendered to the vehicle management office. Before renewal, all relevant traffic violations must be resolved; otherwise, the application will not be accepted. The motor vehicle driver's license can be renewed through the mobile app "Traffic Management 12123," or through the vehicle management office, traffic management department, or public security authorities, effectively renewing the motor vehicle driver's license.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.