What Octane Fuel Does a Porsche 911 Require?

1 Answers
LaLeah
07/29/25 7:47pm
Porsche 911 specifies a minimum fuel octane rating of 95, so this vehicle can use 95 octane or higher gasoline. Using fuel that does not meet the engine's specified octane rating may, to some extent, affect the car's power performance and fuel economy. More details about the Porsche 911 are as follows: Introduction: The Porsche 911 features a 2-door, 4-seat hardtop sports car body structure. It has a body length of 4519mm, width of 1852mm, height of 1298mm, a wheelbase of 2450mm, a fuel tank capacity of 64 liters, a trunk capacity of 132 liters, and a curb weight of 1450kg. Engine and its parameters: The Porsche 911 is equipped with a 3.0T twin-turbocharged engine, delivering a maximum power of 283kW at 6500 rpm, and a maximum torque of 450Nm between 1950 to 5000 rpm, paired with an 8-speed dual-clutch transmission.
Was this review help?
16
3
Share
More Forum Discussions

How to fold down the rear seats of a BMW 3 Series?

To fold down the rear seats of a BMW 3 Series: 1. Pull the handles located on both the left and right sides of the trunk; 2. Return to the cabin and fold down the rear seats. The BMW 3 Series is a mid-size car with the following dimensions: length 4719 mm, width 1827 mm, height 1459 mm, wheelbase 2851 mm, and a fuel tank capacity of 59 liters. The BMW 3 Series is equipped with a 2.0T turbocharged engine, delivering a maximum power of 115 kW at 4500 to 6500 rpm, and a maximum torque of 250 Nm, paired with an 8-speed automatic transmission.
2
5
Share

How to Open the Car Window When the Engine is Off?

When the car is not started, simply turn the key to the ON position. Here are specific details about car windows: 1. Car Window: It is a window set on the four walls of the compartment to shield from wind and rain without obstructing the view. 2. Material: Car windows are generally made of glass materials, which have evolved significantly over time. The front and rear windows of a car usually use curved glass that is both aesthetically pleasing and conducive to visibility, embedded in the window frame with rubber seals or adhered with special adhesives. To facilitate natural ventilation, the side window glass of a car can usually be moved up and down or back and forth.
10
0
Share

Where to Add Oil to an Air Compressor?

It is located on the oil and gas tank, with the drain at the bottom and the fill in the middle. Here are some related introductions about air compressors: 1. The use of air compressor oil: Air compressor oil can reduce friction on various types of machinery, protecting mechanical parts and workpieces as a liquid lubricant, primarily serving functions such as lubrication, cooling, rust prevention, cleaning, sealing, and buffering. 2. Common types of air compressors: Common air compressors include piston air compressors, screw air compressors (which are further divided into twin-screw and single-screw air compressors), centrifugal compressors, as well as sliding vane air compressors and scroll air compressors.
1
4
Share

Is it acceptable to change fully synthetic motor oil once a year?

It is acceptable to change fully synthetic motor oil once a year. Fully synthetic motor oil appears as a clear, semi-transparent or transparent liquid with a shelf life of up to 5 years. Synthetic motor oil is chemically engineered lubricant whose composition can be adjusted according to different usage purposes. The replacement procedure for fully synthetic motor oil is as follows: 1. Start the vehicle engine for preheating; 2. Unscrew the drain plug; 3. Remove the oil filter; 4. Apply new oil to the gasket of the new filter; 5. Pour new oil into the oil pan; 6. Check for leaks at the lower part of the engine and verify oil level with dipstick before starting the engine for testing.
5
4
Share

What are the sensors in a car engine?

Automotive engine sensors include the mass air flow sensor, throttle position sensor, accelerator pedal position sensor, intake air temperature sensor, coolant temperature sensor, and camshaft position sensor, among others. These sensors are indispensable components of a vehicle. Based on their location, engine sensors are primarily categorized into crankshaft position sensors and camshaft position sensors. According to the technology applied, they are mainly classified into electromagnetic induction sensors, Hall effect sensors, and photoelectric effect sensors. Among these, the crankshaft position sensor is a crucial component in computer-controlled ignition systems. Its function is to detect top dead center signals, engine speed signals, and crankshaft angle signals, inputting these data into the computer to control the ignition sequence of cylinders and issue commands for optimal ignition timing.
13
3
Share

What to Do When the Truck's Exhaust Emission Warning Light Comes On?

Truck engine exhaust system warning light on the solution is to read the fault code to confirm the location of the fault, and then replace the damaged parts. The reasons for the engine exhaust system warning light coming on are as follows: 1. Poor quality of car gasoline: Poor fuel quality may lead to abnormal mixture ratio, electronic equipment failure, and exhaust system abnormalities. 2. Faulty electronic components in the intake system: Such as oxygen sensor, carbon canister solenoid valve, throttle, engine carbon deposits. 3. The engine control program needs to be updated or debugged: If the warning light comes on while driving, and the engine lacks power or shakes severely, it is necessary to go to a nearby repair service station for engine inspection and maintenance.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.