···
Log in / Register

What number to call when your car breaks down on the road?

4 Answers
VonAdeline
07/29/25 11:46pm

Call 110, 122 or your insurance company. Here are emergency handling methods for sudden car breakdowns on the road: 1. Overheating, boiling over: There are many reasons for overheating, such as: broken fan belt, leaking radiator or hose, thermostat failure, oil leakage, etc. If the engine loses power or produces severe knocking/detonation sounds while driving, it's mostly caused by engine overheating. 2. Low oil pressure warning: When the oil canister red light comes on, it usually means the engine is low on oil. Never continue long-distance driving at this time, otherwise the engine may be completely damaged. 3. Brake warning light on: If the brake pads were normal before departure but the brake warning light comes on during driving, it most likely indicates insufficient brake fluid level at this time.

Was this review help?
4
1
Share
Lauren
08/16/25 3:06am

If my car breaks down on the road, the first thing is to ensure my own safety. I should slowly pull over to the side of the road, turn on the hazard warning lights, then take out the warning triangle from the trunk and place it 50 to 100 meters behind the car to prevent other vehicles from colliding. Next, it's time to call for help. I usually call the 24-hour roadside assistance hotline provided by my insurance company—the number is clearly written on the insurance policy. If I don't have the policy, I check my phone contacts. If there's a problem on a Chinese highway, I can dial 122 to call the police for help, and they will dispatch a tow truck or traffic police to handle the situation. I usually recommend everyone to save or memorize these important numbers. In case of a breakdown, don’t panic—stay calm and composed, as safe driving is always the top priority.

Was this review help?
9
0
Share
Expand All
VanLouis
10/19/25 4:01am

When my car breaks down on the road, the first thing I think of is calling for roadside assistance, as fixing it myself is usually too difficult. The most reliable way is to contact my car insurance company, as they have professional teams that offer free towing or on-site services, and I keep their number saved in my phone. If I don't have insurance, I can call a local rescue company, such as dialing 114 for inquiries. During the process, I always make sure to park in a safe spot first, like the emergency lane, turn on the hazard lights, and set up the warning triangle to avoid the risk of rear-end collisions. I think joining a roadside assistance membership plan in advance is quite practical—the monthly fee is affordable, but it can be a lifesaver in critical moments. In short, if a breakdown occurs, don't try to handle it recklessly; seeking help immediately is better than struggling alone.

Was this review help?
19
1
Share
Expand All
VonLayla
12/02/25 4:36am

When encountering a vehicle breakdown on the road, the first thing I do is find a safe spot to pull over, turn on the hazard lights, and place the warning triangle behind the car. For phone assistance, I directly call the roadside assistance hotline, usually the number provided by the insurance company or professional service provider. Beginners should remember to note these contacts in advance and regularly check the car maintenance manual. Safety comes first—don't hesitate. After making the call, just wait patiently for assistance.

Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the method for judging the distance to the car behind using the interior rearview mirror?

The method for judging the distance to the car behind using the interior rearview mirror is: 1. When the rear car's engine hood is visible in the interior rearview mirror but the grille is not, it indicates a distance of about 3 meters from the rear car; 2. When the rear car's grille is visible in the interior rearview mirror, it indicates a distance of about 8 meters from the rear car; 3. When the rear car's wheels are fully visible in the interior rearview mirror, it indicates a distance of more than 20 meters from the rear car. The adjustment method for the interior rearview mirror is: place the distant horizon at the midline of the interior rearview mirror, then move left and right until the image of the right ear is just at the left edge of the mirror. The function of the car's interior rearview mirror is to reflect the situation behind, beside, and below the car, expanding the driver's field of vision.
15
3
Share

What is the charging voltage for a 12V battery?

12V lead-acid battery's maximum charging voltage is around 15V. The battery's lifespan and charging precautions are as follows: Charging precautions: Generally, after the electric vehicle charger's indicator turns green, floating charge for 1-2 hours can end the charging process. The charging time is usually controlled within 8-10 hours and should not exceed 12 hours. If charged overnight, the charging time will far exceed 12 hours. Overcharging an electric vehicle battery can cause a large amount of gas to erode the battery's plates, leading to the detachment of active material and ultimately reducing the battery's service life. Battery lifespan: Under ideal conditions, the number of charging cycles can reach approximately 1000-2000 times while still maintaining over 70% of usable capacity. For PHEVs, a single cycle typically covers about 50-80 kilometers, so before the battery is scrapped, it can be used purely electrically for about 100,000 kilometers.
4
1
Share

What are the gear positions in BMW cars?

BMW cars have gear positions including P, D, N, R, and S. The usage methods for P, D, N, and R gears are as follows. Usage of P and D gears: The P gear is the parking gear, used when the car is not driven for a long time; the D gear is the drive gear. By holding down the lock button on the left side of the gear lever and pulling it backward, a green 'D' will appear on the gear lever, indicating the car is in D gear. Usage of N and R gears The N gear is the neutral gear, used when the car is parked for a short time without turning off the engine, such as when waiting at a red light or in traffic. Push the gear lever forward until an 'N' appears on it, indicating the car is in N gear. The R gear is the reverse gear, used when the car is moving backward. Hold down the lock button on the left side of the gear lever and push the gear lever forward until an 'R' lights up, indicating the car is in reverse gear.
20
2
Share

What Causes Engine Ignition Delay?

Engine ignition delay can be caused by a faulty camshaft sensor, insufficient oil pressure, or a malfunctioning carbon canister solenoid valve. The details are as follows: Faulty camshaft sensor: If the timing alignment is confirmed to be correct, the focus should be on checking whether the camshaft position sensor is functioning properly. Insufficient oil pressure: Gasoline pump pressure leakage or poor injector sealing can lead to inadequate gasoline pressure, resulting in prolonged ignition time. Malfunctioning carbon canister solenoid valve: Difficulty in ignition after exposure to sunlight, but without requiring a second ignition attempt, usually indicates an issue with the carbon canister solenoid valve. This is because gasoline evaporation is particularly strong after exposure to sunlight, and poor sealing of the carbon canister valve can easily lead to cylinder flooding or wet wall conditions.
20
5
Share

What Causes the Unpleasant Smell in Car Air Conditioning?

There are two main reasons for the unpleasant smell in car air conditioning: issues with the cabin air filter or problems with the evaporator. Details are as follows: Cabin Air Filter Issues: The function of the cabin air filter is straightforward—it filters the air blown out by the air conditioning to prevent impurities from entering the cabin. However, if the cabin air filter is severely contaminated, it not only fails to protect the cabin environment but also causes secondary pollution to the cabin air. Evaporator Issues: When the evaporator is working to cool the air, it encounters relatively hot outside air, causing moisture to form on its surface. This moisture easily traps dust, insects, and other impurities. Over time, in a constantly damp environment, these trapped substances can ferment, mold, and breed bacteria. When the air conditioning is turned on again, the fan will blow these harmful substances directly into the cabin.
19
5
Share

How to Remove Paint Transferred from Another Car on Your Vehicle?

The methods to remove paint transferred from another car on your vehicle are: 1. Wipe in a straight line with a compound; 2. Repair with nail polish that matches the car's color or is transparent; 3. Remove through wet sanding, polishing, and waxing; 4. Use thinner and a soft cloth to wipe; 5. Apply essential balm for wiping. The functions of car paint are: 1. Protect the car from erosion by various corrosive agents in the atmosphere; 2. Decorate the car; 3. Identify the type of car; 4. Improve the comfort and sealing of the car, preventing noise caused by vibration. Car paint maintenance methods: 1. Wash the car regularly; 2. Waxing helps prevent oxidation, isolate static electricity, enhance the brightness of the car paint surface, and isolate the paint from dust and harmful gases; 3. Crystal coating applies a high molecular film with hardness and smoothness on the car surface, which solidifies to protect the paint; 4. Glaze sealing penetrates the car paint to form a mesh protective film, enhancing the paint's strength.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.