What number to call to find the owner when a vehicle blocks the road?

How Thick Should Jumper Cables Be for Cars? Can Ordinary Wires Be Used?

Automobile jumper cables have specific thickness requirements, measured in square millimeters. For general household cars, it is recommended to use copper cables with an outer diameter of 10mm or more. When jump-starting a car, it is essential to use dedicated jumper cables. If ordinary wires must be used as a substitute, ensure they are large-gauge pure copper national standard wires to avoid affecting the jump-starting effectiveness and prevent damage to both vehicles. The specific criteria for selecting jumper cables are as follows: Choose based on the car's displacement: Do not randomly select jumper cables, as improper use can easily damage the battery. The car's displacement determines the appropriate jumper cables, and one should not opt for low-quality cables just because they are cheaper. Choose based on the car battery's current: The higher the current, the thicker the jumper cables needed. Using thinner cables can easily lead to leakage, which not only damages the battery but also increases safety risks.

11

4

Share

At what level of tire wear should tires be replaced?

Regularly check the tire wear indicator baseline on your vehicle's tires. When the tread wear on the outer part of the tire exceeds this replacement baseline, it indicates that the tire must be replaced. Tires should also be replaced when there is uneven wear on the tread or edges, or when there is bulging on the tire sidewall. The specific details are as follows: 1. Worn tires: Tires have tread wear indicator marks, which are slightly raised marks located at the bottom of the tread grooves with a height of 1.6 mm (the legal minimum groove depth). If the tread rubber blocks wear down to the same height as these raised marks, the tires should be replaced immediately, as continued driving is no longer safe. 2. Damaged tires: Hitting curbs, falling into potholes, or punctures from nails can severely damage tires. Damaged tires may be repairable, but only a professional repair shop can accurately determine whether a tire can be repaired or needs to be replaced. Generally, sidewall damage cannot be repaired, and for safety reasons, the tire must be replaced. 3. Aged tires: If you notice tread deformation or significant cracking, stop using these tires immediately and have them inspected by a professional repair shop to determine if they can continue to be used. 4. Bulging tires: Tire bulges are a major cause of blowouts, especially on highways, and are extremely dangerous. Tires with bulges should be replaced promptly.

2

3

Share

What are the drawbacks of Tianjin regional license plates?

The drawback of Tianjin regional license plates is that they are subject to traffic restrictions. Ordinary Tianjin license plates are difficult to obtain due to limited resources. Tianjin regional license plates are more convenient to register and can meet the urgent needs of some people, but the trade-off is that they are subject to traffic restrictions, offering less freedom compared to regular license plates. Tianjin introduced regional license plates to prevent car owners from choosing out-of-town license plates. The introduction of regional license plates is an effective measure to prevent tax revenue outflow and also helps alleviate the urgent car needs of some people. Additional details are as follows: Chronological division: Tianjin's vehicle license plates are different from those in other regions, as the plate numbers are not divided by district or county. In other regions, the license plate number represents the first-level code of the city where the vehicle is registered, with 'A' typically denoting the provincial capital, 'B' the second-largest city in the province, and 'C' the third-largest city, and so on, though some provinces may have exceptions. As a municipality directly under the central government, Tianjin's license plate code is abbreviated as 'Jin,' and the license plate numbers are allocated chronologically. The release time of the next number segment is determined based on the usage quantity of the previous segment, and the first letter is generally issued in sequential order.

10

0

Share

Why Does a Car's Air Conditioner Blow Hot Air?

The following are the reasons why the air conditioner blows hot air: 1. Overheating protection of the compressor: If the compressor is overloaded (or even if there is too much refrigerant), causing the compressor temperature to rise too high, it will automatically shut down for protection. 2. Overcurrent protection of the compressor: If the compressor is overloaded (or gets stuck due to a malfunction), or if the generator suddenly provides excessive current, the compressor will shut down due to overcurrent protection. 3. Temperature sensor on the condenser: If the external temperature is too high and the air conditioning load is too heavy, leading to poor heat dissipation and excessive condenser temperature, the signal from the temperature sensor will cause the air conditioning compressor to stop working. 4. Temperature sensor on the evaporator: If it malfunctions, it may send incorrect signals, causing the compressor to stop working.

8

4

Share

Why Do Pure Electric Vehicles Have Exhaust Pipes?

Pure electric vehicles have exhaust pipes because: the operation of the vehicle generates a significant amount of heat, and the emission of exhaust gases cannot be separated from the exhaust pipe. Expanded relevant information is as follows: 1. Exhaust Pipe: The exhaust pipe is part of the engine's exhaust system. The exhaust system mainly includes the exhaust manifold, exhaust pipe, and muffler. Generally, the three-way catalytic converter, which controls engine pollutant emissions, is also installed in the exhaust system. The exhaust pipe usually includes the front exhaust pipe and the rear exhaust pipe. 2. Exhaust System: The engine's exhaust gases exit the cylinders and first pass through the exhaust manifold. After the initial noise reduction is completed, the exhaust gases enter the rear muffler for further noise reduction before finally being released into the atmosphere. The exhaust system has three main functions: first, to reduce exhaust pressure; second, to decrease exhaust noise; and third, to lower exhaust pollution.

7

4

Share

What causes the clicking sound when starting the car but it won't start?

The reasons why the car makes a clicking sound but won't start are as follows: 1. No fuel: The fuel gauge shows below the red line, so naturally the car won't start. 2. Dead battery: This could be due to a drained battery from leaving the headlights on for too long or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Checking for a dead battery is simple—press the horn. 3. Wrong gear: For automatic cars, the gear must be in P or N when starting. If it's in R or D, the car won't start. Some manual cars also won't start if the clutch isn't pressed. 4. No antifreeze: Some car owners use water or low-quality antifreeze, which can freeze the entire cooling system in extremely cold winter conditions, causing the engine to crack, the water pump to fail, and preventing the car from starting, while also damaging other engine components.

5

Share

What number to call to find the owner when a vehicle blocks the road?

How Thick Should Jumper Cables Be for Cars? Can Ordinary Wires Be Used?

At what level of tire wear should tires be replaced?

What are the drawbacks of Tianjin regional license plates?

Why Does a Car's Air Conditioner Blow Hot Air?

Why Do Pure Electric Vehicles Have Exhaust Pipes?

What causes the clicking sound when starting the car but it won't start?

Why Hasn't the Traffic Violation Been Cleared Online After Processing?

Does Shifting Gears with the Engine Off Damage the Car?

Does overfilling the gear oil in a scooter have any impact?

Is the X1 transmission made by ZF?