What Needs to Be Replaced in Car Maintenance?

Should You Engage the Gear or Press the Clutch First Before Driving?

Before driving, you should engage the gear first and then press the clutch. Here are some key points to note when operating a manual transmission car: 1. Pressing: Master the pressing of the clutch pedal through practice to develop a good habit—press it all the way down and release it slowly. 2. Releasing: Coordinate the throttle and clutch. When starting, engage first gear, slowly release the clutch, and apply the throttle in the semi-clutch state. Only release the clutch completely after the car starts moving. 3. Shifting: Master the timing of shifting. Shift gears when the engine speed is around 2000 RPM—first press the throttle and then the clutch to prevent the clutch from being forced to disengage. Then shift gears. The shifting sequence must be first gear, second gear, third gear, fourth gear, and fifth gear. Skipping gears is not recommended. Downshift according to the vehicle speed.

5

0

Share

What is the normal pressure range for car air conditioning?

Under normal operating conditions of the air conditioning system, the low pressure typically ranges between 1.0—2.5 bar, while the high pressure ranges between 15—18 bar. Additional information: 1. Normal pressure range: The standard range for car air conditioning pressure is generally that the high pressure should not exceed 1.7 MPa or fall below 1.3 MPa, while the low pressure should normally be no lower than 1.15 MPa and no higher than 1.25 MPa. If the low pressure is higher or lower than this normal range, it indicates improper adjustment of the expansion valve. 2. Evaporator wear: The car air conditioning evaporator, fan, and other components are often in a closed and dark state, creating a high-temperature and humid internal environment. Impurities, dust, bacteria, and viruses from the air enter the air conditioning system and combine with condensed water, clogging components such as the evaporator. Over time, this leads to the accumulation of dirt, nicotine, mold, fungi, and other contaminants.

4

2

Share

How often should the transmission fluid be changed for a Toyota Reiz?

Toyota Reiz requires transmission fluid replacement every 80,000 kilometers. The Reiz is a sporty B-segment sedan under Toyota, featuring rear-wheel drive. Its front suspension employs a double-wishbone independent suspension, while the rear utilizes a multi-link independent suspension. The multi-link independent suspension is an evolution of the double-wishbone design, where the two wishbones are replaced with separate links. The Reiz's headlights feature a sharper design, giving the front fascia a resemblance to the Lexus ES model. The taillights adopt an irregular contour, with the high waistline extending to the rear and integrating with the trunk, ultimately merging with the ducktail spoiler. This creates smooth side profiles while visually enhancing the vehicle's substantial presence.

3

0

Share

How to reset the one-button start maintenance reminder for Geely Vision S1?

Turn off the ignition switch, press the left-right directional button on the right side of the multifunction steering wheel, then press the one-button start to power on the vehicle. After five seconds, release the button, and the dashboard will display a reset prompt. Press and hold the SET button for more than five seconds, then press the MODE button, and finally turn off the vehicle. Below is some relevant information about the Geely Vision S1: 1. Introduction to the Geely Vision S1: The Geely Vision S1 is the second strategic model from Geely Auto in the crossover SUV market. 2. Core values: The letter "S" in the name Geely Vision S1 represents the five core values of the product: Sharp (stylish design), Smart (convenient connectivity), Safe (comprehensive protection), Satisfying (comfortable experience), and Sporty (dynamic driving pleasure).

11

5

Share

What engine does the Roewe RX3 use?

Roewe RX3 is equipped with a 1.3T turbocharged engine and a 1.6L naturally aspirated engine. The 1.3T engine has a maximum power of 120 kW and a maximum torque of 230 Nm; the 1.6L engine has a maximum power of 92 kW and a maximum torque of 158 Nm. The Roewe RX3 is a compact SUV launched by Roewe, with dimensions of 4408 mm in length, 1804 mm in width, and 1651 mm in height, and a wheelbase of 2625 mm. In terms of appearance, the Roewe RX3 adopts the Roewe family-style design language, featuring a large front grille decorated with chrome trim strips. The overall design is well-suited to the car's character.

8

0

Share

How to clear the hill start assist fault on Geely GL?

For the hill start assist fault on Geely GL, you can first turn off the hill start assist, wait for a few minutes, and then restart it. If the fault persists, it is recommended to go to a 4S store for maintenance and inspection. The following is a related introduction about Geely Emgrand GL: 1. Introduction to Emgrand GL: Emgrand GL was officially launched on September 20, 2016, at the main venue of the G20 Summit—Hangzhou International Expo Center. As the fourth model of Geely's premium 3.0 generation, the launch of Emgrand GL filled the gap in Geely's A+ sedan market, enriched and improved the product lineup of the "Emgrand Corps," and sounded the horn for Geely's entry into the mid-to-high-end A-class car market, further consolidating and enhancing its leading position in the sedan market. 2. Four high-quality features: high appearance, high safety, high drivability, and high comfort.

20

3

Share

What Needs to Be Replaced in Car Maintenance?

Should You Engage the Gear or Press the Clutch First Before Driving?

What is the normal pressure range for car air conditioning?

How often should the transmission fluid be changed for a Toyota Reiz?

How to reset the one-button start maintenance reminder for Geely Vision S1?

What engine does the Roewe RX3 use?

How to clear the hill start assist fault on Geely GL?

Is Dongfeng Citroën a Domestic Car?

Is the Haval Chitu's Fuel Consumption High?

Is Wheel Balancing Necessary After Patching a Rear Tire?

Can I Take the Manual Transmission Test After Passing the Automatic Transmission Test?