What Needs to Be Replaced During the First Car Maintenance?

1 Answers
SanLucia
07/30/25 3:20am
During the first car maintenance, the primary tasks are replacing the engine oil and the oil filter. Below is an introduction to car maintenance content: 1. Air Filter: The engine inhales a large amount of air during operation. If the air is not filtered, the dust in it can accelerate the wear of the piston group and the cylinder. Larger particles entering between the piston and the cylinder can also cause severe "cylinder scoring." The function of the air filter is to remove dust and particles from the air, ensuring that sufficient and clean air enters the cylinder. 2. Fuel Filter: The role of the fuel filter is to provide clean fuel to the engine, filtering out water and impurities from the gasoline. This optimizes engine performance and provides the best protection for the engine. During car maintenance, the technician will perform other inspections based on the specific condition of the vehicle and may add other maintenance items, such as inspection, cleaning, and maintenance of the engine-related systems, wheel alignment checks, inspection of various fastening components, etc.
Was this review help?
7
4
Share
More Forum Discussions

What is the reason for the flashing charger fault light on Changan Benben?

The flashing charger fault light on Changan Benben may be caused by poor grounding, power supply mismatch, battery issues, etc. Below is a related introduction about Changan Benben: 1. Engine: The engine of Changan Benben is equipped with VVT technology and multi-point fuel injection technology, and uses an aluminum alloy cylinder head and block. This engine is paired with a 5-speed manual transmission or a 5-speed AMT transmission. 2. Body dimensions: Changan Benben is the first self-developed sedan under the Changan brand, with both the engine and exterior designed independently. In terms of body dimensions, the Changan Benben measures 3525mm in length, 1650mm in width, and 1550mm in height, with a wheelbase of 2365mm.
20
5
Share

Is Mobil 1000 Semi-Synthetic or Fully Synthetic?

Neither, Mobil Super 1000 is a series of premium mineral engine oils designed to deliver high-level performance and protection for engines under most conditions. Here are the relevant details: Definition: Mobil Super 1000 is a mineral-based multi-grade oil, which is cheaper than the semi-synthetic Super-2000 series and the fully synthetic Mobil 1 series, though it performs less effectively in various aspects. Mobil Super 1000 is more suitable for gasoline engines in regions with higher summer temperatures. However, while high-viscosity oils provide adequate protection at high temperatures, their higher viscosity also results in increased fuel consumption compared to fully synthetic oils like Mobil 1 with higher viscosity indices. Features: If you prioritize fuel efficiency, extended oil change intervals, and reduced sludge formation, Mobil Super 1000 is recommended.
14
0
Share

What to do when the VSA warning light in the car is on?

The illumination of the VSA light in a car indicates a malfunction in the electronic stability control system. It is recommended to visit a nearby repair shop or 4S dealership for vehicle inspection. Additional relevant information is as follows: 1. The electronic stability control system is turned on by default, with the VSA light in the off state. When the VSA indicator light is on, it may be due to the electronic stability control system being manually turned off, which is usually caused by the owner's misoperation. 2. If misoperation is ruled out, it may indicate a fault in the electronic stability control system. In this case, the vehicle can still be driven, but it is essential to avoid high-speed sharp turns to prevent potential oversteering situations.
6
2
Share

Occasional feeling of brake pedal going empty?

Occasionally feeling the brake pedal going empty and experiencing reduced braking force indicates a malfunction in the brake system. Here is relevant information about brakes: 1. Introduction: As the name suggests, it is a mechanical braking device that can slow down the vehicle, also known as a decelerator. 2. Structure: The car brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake shoes on the brake drum, which then clamp the brake disc. 3. Function: To slow down or stop the vehicle. The manual brake in a car is located next to the gear shift and is connected to the brake lever. Common examples also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc brakes to decelerate.
4
0
Share

What does 9-speed Tiptronic mean?

9-speed "Tiptronic" refers to a transmission with 9 forward gears and 1 reverse gear, which is essentially an automatic transmission with added manual control functionality. Here is relevant information about Tiptronic transmissions: 1. Advantages: A Tiptronic transmission combines manual shifting and automatic shifting in vehicles. This transmission type integrates the benefits of both automatic and manual transmissions, minimizing power loss in the shifting system to the greatest extent. 2. Usage: The primary advantage of a Tiptronic transmission is its enhanced gear selection flexibility. With the manual gear selection mode, you can manually downshift to an appropriate gear before entering a curve, maintain the desired RPM during the turn, and have sufficient power when exiting the curve.
8
1
Share

Is it illegal to drive with hazard lights on?

Driving with hazard lights on in non-low visibility weather conditions is considered illegal. Here are the situations when hazard lights should be used: When temporarily parked on the road: When temporarily parked on the road, especially in non-motorized lanes or when borrowing a lane for parking, the hazard warning lights should be turned on immediately to alert passing vehicles and pedestrians for safety. The driver should not leave the vehicle casually. When involved in a traffic accident: If a vehicle is involved in a traffic accident, the hazard warning lights should be turned on immediately to alert passing vehicles and pedestrians for safety, and the authorities should be notified promptly to await rescue or handling. When reversing or making a U-turn: When reversing or making a U-turn in complex road sections, the hazard warning lights should be turned on to alert passing vehicles and pedestrians for safety and to draw attention.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.