···
Log in / Register

What needs to be replaced during the 10,000-kilometer maintenance for a new car?

3 Answers
EloiseDella
07/25/25 1:16am
1.The 10,000-kilometer mark is essentially the second maintenance service. The main tasks include changing the engine oil and oil filter, removing and inspecting the air filter, conducting routine checks for oil leaks or seepage in the engine and transmission, checking tire pressure and wear, and ensuring all fluid levels are adequate. Below is more detailed information: 1. Maintenance Items: The air filter and cabin air filter should be removed, cleaned, and reinstalled. If they are too dirty, they should be replaced. If you are not very familiar with car maintenance, it is recommended to refer to the maintenance manual, which lists the required maintenance items at specific mileage intervals. Follow the instructions in the maintenance manual strictly. Reject any additional items recommended by the 4S shop that are not listed in the manual. Other checks include lifting the chassis to inspect it, checking the coolant, brake fluid, transmission fluid, and power steering fluid levels. If any fluid is low, ensure there are no leaks. 2. Maintenance Manual: For the recommended maintenance schedule and items, please refer to your maintenance manual, which includes the manufacturer's suggested intervals and tasks. Note that recommendations may vary between manufacturers, so check carefully. During the warranty period, it is advisable to have maintenance performed at a 4S shop.
Was this review help?
6
1
Share
McArabella
08/11/25 11:14am
After driving my new car for 10,000 kilometers, I went for the first maintenance service. It felt quite simple but very important. They mainly changed the engine oil and oil filter because the oil gets dirty after prolonged engine operation, and not changing it in time could affect performance and fuel consumption. They also checked the tire pressure and wear, adjusting them to the proper levels to prevent excessive wear or blowouts. Additionally, they inspected the braking system to ensure it was responsive and reliable. The air filter is usually cleaned or replaced to avoid dust clogging the engine intake. Finally, they checked the levels of various fluids, such as coolant and brake fluid, to make sure they were normal. The whole process didn’t take too long, but it helps prevent major issues. Especially for a new car, it’s important to develop a habit of regular maintenance to keep it running smoothly and safely.
Was this review help?
12
2
Share
Expand All
DeDavid
09/26/25 8:27am
As an average car owner, I'm very mindful of maintenance costs. At the 10,000-kilometer mark for a new car, I'll only do the essential items to avoid waste. The core is changing the engine oil and oil filter - this is fundamental for all vehicles, costing just a few hundred yuan to complete. I can check tire pressure myself, no need to always pay for adjustments. Brake inspection is also crucial - safety first, after all. Other items like the air filter or cabin air filter don't need immediate replacement if they're not dirty; they can wait until next time. This approach saves quite a bit of money while ensuring the vehicle runs properly. I recommend booking the dealership service in advance or finding a trusted repair shop - they're more reliable than roadside stalls and often include free car washes. Remember, don't delay maintenance - small issues can become big troubles if neglected.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

Which country produces Mercedes-Benz cars?

Mercedes-Benz is a German automobile brand. 1. Mercedes-Benz is one of the premium automobile brands, renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes-Benz three-pointed star is one of the automobile and brand logos. In October 2016, Mercedes-Benz ranked 9th in the list of the world's 100 most valuable brands. 2. The all-new Mercedes-Benz The Mercedes-Benz S-Class is the flagship luxury model in the Mercedes-Benz lineup, known for its elegant and stable exterior design and luxurious configurations. The Mercedes-Benz S-Class has won the favor of many successful individuals. 1. Exterior: The new S-Class is only a mid-cycle facelift model, with minor modifications to the exterior. The revised bumper air intakes and LED daytime running lights make the car appear more youthful, while the new LED taillights also enhance nighttime driving safety. 2. Steering wheel: Covered with Nappa leather, and the center console uses larger wood trim, further enhancing the car's sense of luxury. 3. In terms of electronic equipment: The new S-Class is the first to feature an active body control system with crosswind stabilization technology, which can effectively mitigate the adverse effects of crosswinds on driving stability. 4. In terms of safety features: A series of systems such as the ATTENTION ASSIST attention assist system, Night View Assist Plus enhanced night vision assist system, and Adaptive Highbeam Assist adaptive high beam assist system significantly improve the safety performance of the S-Class.
13
4
Share

What is the reason for the Volkswagen CC steering system locking and failing to start?

Volkswagen CC steering system locking and failing to start is caused by reasons such as steering gear failure or steering control module failure. The following is an introduction to related content about the Volkswagen Polo: 1. Body dimensions: The Volkswagen Polo has body dimensions of 4053mm in length, 1751mm in width, and 1446mm in height, with a wheelbase of 2564mm. 2. Power: The Volkswagen Polo is equipped with three gasoline engines (1.0L/1.0T/1.5T) and one 1.6T diesel engine, with maximum power ranging from 48kW (65PS) to 110kW (150PS), matched with a 6-speed manual transmission, 6-speed automatic transmission, and 7-speed dual-clutch transmission.
8
0
Share

How Many Points Deducted in Subject 2 Results in Failure?

Subject 2 passing score depends on the situation. The examination is considered passed under the following conditions: For applicants of large buses, trailers, city buses, medium buses, and large trucks, a score of 90 is required; for other vehicle types, a score of 80 is needed. The full score for driving license Subject 2 is 100 points, with evaluation criteria set for failure, deduction of 20 points, 10 points, and 5 points. Additional information: 1. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license assessment, referred to as the field driving skill test. For small cars C1 and C2, the test items include five mandatory tests: reverse parking, side parking, slope fixed-point parking and starting, right-angle turning, and curve driving (commonly known as S-curve) (some regions have a sixth item, high-speed card collection). 2. Large vehicle driving test: For large vehicles A1, A2, A3, B1, and B2, the test items include stake test, slope fixed-point parking and starting, side parking, passing a single-plank bridge, curve driving, right-angle turning, passing a width-limited gate, passing continuous obstacles, bumpy road driving, narrow road U-turn, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
17
2
Share

Can You Remedy a Wrong Gear Shift During the Gear Change Exercise in Driving Test Stage Three?

If you shift into the wrong gear during the gear change exercise in Driving Test Stage Three, you can remedy it by quickly shifting into the correct gear. For example, if you intended to shift into 2nd gear but accidentally shifted into 3rd gear, immediately move the gear lever back to the neutral position and then quickly shift into 2nd gear. However, the time between shifting into the wrong gear and correcting it must be very short. The computer system uses various sensors to monitor signals, and if it detects issues like mismatched gears causing high RPM or jerking, it will immediately flag the candidate as failing the test. Additional Information: 1. Driving Test Stage Three Content: Driving Test Stage Three includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment, specifically the road driving skills and safe and civilized driving knowledge test. The content varies depending on the type of vehicle license. 2. Driving Test Stage Two Content: Driving Test Stage Two, also known as the small road test, is part of the motor vehicle driver's license assessment, specifically the field driving skills test. For small vehicles (C1/C2), the test includes five mandatory items: reverse parking, parallel parking, hill start, right-angle turn, and S-curve driving (some regions may include a sixth item: highway toll card collection).
5
1
Share

Where is the production site of Changan Eado?

The production site of Changan Eado is located at Konggang Avenue, Yubei District, Chongqing. The Changan Eado is a compact 4-door, 5-seater sedan with the following dimensions: length 4730mm, width 1820mm, height 1505mm, and a wheelbase of 2700mm. It has a fuel tank capacity of 53 liters. The Changan Eado is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 116 kW at 5500 rpm and a maximum torque of 260 Nm between 1500 to 4000 rpm. The vehicle features front-wheel drive, with a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
8
4
Share

What does Honda CRV240 mean? What is the displacement?

1. The combined meaning of CRV240 turbo is: this CRV is equipped with a 1.5-liter turbocharged engine. Another example: Honda Civic, 180 turbo means: equipped with a turbocharged engine with a maximum torque approximate value of 180 N·m. 2. CRV is a classic urban SUV model produced by Dongfeng Honda Motor Company, and 240 refers to the maximum torque of this vehicle being 240 N·m. It should be noted that this value is an approximation, not an exact figure. Turbo refers to a turbocharged engine. The abbreviation T stands for turbo in English. 3. The seat design of the CR-V is very unique. The front seats can be laid flat after removing the headrests, forming a "bed" with the rear seats. Although it is a bit narrow, it is still quite comfortable. The rear seats can be split 6/4 or folded and pushed behind the front seats, leaving more space for the luggage compartment. A picnic table is placed under the luggage compartment, which is very practical for occasional picnics. 4. The CR-V's drive system is a dual-pump real-time four-wheel drive. Under normal conditions, it is front-wheel drive. When encountering adverse road conditions such as rain, snow, or sand that cause the front drive wheels to slip, the hydraulic system will promptly distribute torque to the rear wheels to achieve four-wheel drive until the road conditions return to normal.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.