What needs to be maintained for a car at 20,000 kilometers?

1 Answers
VanDallas
07/30/25 6:07am
What needs to be maintained for a car at 20,000 kilometers is: 1. Replace the engine oil, oil filter, clean the air filter, and check whether the generator belt and wiper blades are damaged; 2. Check whether the levels of various fluids are normal; 3. Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 4. Inspect the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Check whether all switches and lights in the car are working properly. The precautions for car maintenance are: 1. Make an appointment in advance; 2. Record any malfunctions or questions encountered while driving and inform the staff during the maintenance registration.
Was this review help?
3
2
Share
More Forum Discussions

What is the material of clutch friction plates?

Clutch friction plates are made of powder metallurgy materials, asbestos-based materials, and paper-based materials. The main requirements for friction plate materials are: 1. Large and stable friction coefficient, with the dynamic friction coefficient as close as possible to the static friction coefficient; 2. High strength, capable of withstanding impact, and not prone to cracking or peeling at high speeds; 3. Wear-resistant, heat-resistant, corrosion-resistant, with good thermal conductivity and small thermal deformation; 4. Should not adhere when left stationary for long periods; 5. Long service life and easy to process. Friction plates are the main components of friction clutches, and the physical properties and mechanical performance of their working surface materials directly affect the clutch's performance.
18
4
Share

How many points will be deducted for overloading a private car by one person?

Overloading a private car by one person will result in a deduction of 2 points. Below are the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China": Article 49: Motor vehicles shall not carry more passengers than the approved number, and passenger vehicles shall not carry goods in violation of regulations. Article 92: If a highway passenger vehicle carries more passengers than the approved number, a fine shall be imposed. If the number of passengers exceeds 20% of the approved capacity or goods are carried in violation of regulations, a fine shall be imposed. If a freight vehicle exceeds the approved load capacity, a fine shall be imposed; if the load exceeds 30% of the approved capacity or passengers are carried in violation of regulations, a fine shall be imposed. Notes: Overloading a vehicle will reduce its braking, steering, and other performance. Excessive load mass will increase the vehicle's inertia, lengthen the braking distance, and increase the risk. Due to the exponential increase in total load mass, the braking effect on slopes is weakened, turning sensitivity is reduced, and the risk of accidents such as failed braking, rolling back, and tire blowouts is heightened.
6
3
Share

What does the SRS indicator mean in a vehicle?

The Supplemental Restraint System (SRS) is an auxiliary protection system that includes components such as the sensor assembly, inflator, folded airbag, igniter, solid-state nitrogen, and warning light. Airbags are distributed in three directions: the front of the vehicle (driver and passenger seats), the sides (front and rear seats inside the vehicle), and the exterior. Below is relevant information about airbags: 1. Introduction to Airbags: The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In the event of a car collision, the SRS can reduce head injuries by 25% and facial injuries by approximately 80%. 2. Principle of Airbags: As an auxiliary configuration for passive vehicle safety, airbags are increasingly valued. When a collision occurs, a gas-filled cushion rapidly inflates between the occupant and the vehicle interior before a 'secondary collision' happens, allowing the occupant to 'land on the cushion' due to inertia, thereby mitigating the impact and absorbing collision energy to reduce the severity of injuries.
15
3
Share

How many cylinders does the Volvo XC60 have?

Volvo XC60 is equipped with a four-cylinder engine. This model uses a 2.0-liter four-cylinder turbocharged engine across the entire lineup. The Volvo XC60 comes with two variants of engines: one is a low-power version of the 2.0-liter turbocharged engine, and the other is a high-power version of the 2.0-liter turbocharged engine. The low-power version of the 2.0-liter turbocharged engine delivers 190 horsepower and a maximum torque of 300 Nm. This engine can output its maximum torque starting from 1,400 rpm and maintains it up to 4,000 rpm. The high-power version of the 2.0-liter turbocharged engine produces 254 horsepower and a maximum torque of 350 Nm. This engine can output its maximum torque starting from 1,500 rpm and maintains it up to 4,800 rpm. The dimensions of the Volvo XC60 are 4,688 mm in length, 1,902 mm in width, and 1,658 mm in height, with a wheelbase of 2,865 mm.
17
1
Share

How many cylinders does the Volvo XC40 have?

The Volvo XC40 uses engines with both three and four cylinders. The XC40 is equipped with three types of engines: a 1.5-liter turbocharged three-cylinder engine, a low-power version of the 2.0-liter turbocharged four-cylinder engine, and a high-power version of the 2.0-liter turbocharged four-cylinder engine. The 1.5-liter turbocharged engine has a maximum power of 120 kW and a maximum torque of 265 Nm, delivering peak torque between 1,500 and 3,000 rpm. The low-power 2.0-liter turbocharged engine produces a maximum power of 140 kW and a maximum torque of 300 Nm, with peak torque available from 1,400 to 4,000 rpm. The high-power 2.0-liter turbocharged engine generates a maximum power of 185 kW and a maximum torque of 350 Nm, achieving peak torque between 1,800 and 4,800 rpm. The dimensions of the Volvo XC40 are 4,425 mm in length, 1,863 mm in width, and 1,652 mm in height, with a wheelbase of 2,702 mm.
14
4
Share

Can motorcycles go on highways in Sichuan?

According to the relevant regulations of the "Sichuan Province Expressway Traffic Management Measures," motorcycles are allowed to travel on highways in Sichuan Province as long as they have all the necessary documents, wear safety helmets, and the engine displacement is greater than 50cc. Motorcycles on highways are not allowed to carry passengers, and their speed must be no less than 60 km/h and no more than 80 km/h. Here are some additional details: Precautions for highway travel: When riding on highways, it is mandatory to wear a helmet as per the traffic safety laws. Failure to do so may result in being stopped and fined by traffic police. Additionally, carrying passengers on highways is strictly prohibited. Motorcycle precautions: The speed of a motorcycle must not exceed 80 km/h, and it must ride on the right side of the road, maintaining a speed between 70 km/h and 80 km/h. Exceeding this speed limit will result in penalties from traffic police. While riding, it is essential to stay on the right side of the road. Changing lanes arbitrarily or occupying other vehicles' lanes will also lead to penalties.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.