What Needs to Be Maintained During the First Car Service?

1 Answers
Virgil
07/30/25 3:51am
The items that need to be maintained during the first car service include: 1. Inspect the engine's working condition, such as whether the pipe connections are normal, if there are any leakage points, whether the engine sounds normal during operation, and if there are any abnormal noises; 2. Check if the coolant level is within the normal range; 3. Examine the wear level of the brake pads and tires, as well as the tire pressure condition; 4. Inspect the chassis components for any scratches or corrosion; 5. Check the remaining amount of power steering fluid and whether there are any oil leakage signs at the oil pipe interfaces; 6. Perform a comprehensive cleaning of the vehicle, including the engine compartment, body, and interior. New cars generally undergo their first service after driving 3,000 to 5,000 kilometers or 3 to 5 months. After the first service, regular maintenance is also necessary, including periodic oil changes, replacement of various filters, and checking tire conditions and brake pad wear.
Was this review help?
13
3
Share
More Forum Discussions

Symptoms of a Faulty Car Steering Gear?

Symptoms of a faulty car steering gear: 1. Vehicle pulling to one side: If the vehicle continues to pull to one side under normal tire pressure and on a flat road, it usually indicates an issue with the car's steering gear; 2. Unusual noises when turning or steering in place: If there are abnormal sounds when the car is turning or a clunking noise when steering in place, it generally points to a problem with the steering gear or tires; 3. Difficulty in steering wheel returning: If the vehicle's steering wheel returns too slowly or fails to return automatically, it suggests that the steering gear is damaged; 4. Steering gear oil leakage: Oil leakage from the car's steering gear is often caused by aging seals or oil pipes, and the specific cause should be checked by a professional.
16
0
Share

What are the methods for cleaning carbon deposits in cars?

Methods for cleaning carbon deposits in cars: 1. Clean the throttle valve: Remove the engine cover, disassemble the throttle valve, clean it with carburetor cleaner, and then wipe it clean with a clean cloth. 2. Use an IV drip: The IV bottle contains pressurized and atomized cleaning agent, which is injected into the intake tract to produce a chemical reaction and is expelled once the engine is running. 3. Use cleaning agents: Here, the cleaning agent is for the combustion chamber. Inject the cleaning agent into the combustion chamber using an instrument, allowing it to react chemically with the carbon deposits, then extract the waste liquid to complete the cleaning. 4. Open the cylinder for cleaning: If the engine is extremely difficult to start, idles roughly, loses power, or struggles to overtake, it indicates severe carbon deposits. In this case, the engine needs to be disassembled for cleaning, removing parts such as the intake manifold and engine cover to clean the engine.
19
0
Share

How to Turn Off the RAV4 Engine Start-Stop?

Method to turn off the RAV4 engine start-stop: Simply press the engine start-stop button to deactivate it. The automatic start-stop button is located to the left of the cigarette lighter, featuring an icon of a circle with the letter 'A' inside and the letters 'OFF' below. It's important to note that the automatic start-stop is enabled by default and will activate every time the vehicle is restarted. The RAV4 is a compact SUV under the Toyota brand, with dimensions of 4600mm in length, 1855mm in width, and 1680mm in height, and a wheelbase of 2690mm. The RAV4 stands out for its superior configuration, including standard features such as cruise control, EPS electric power steering, and rear seats that can slide and be folded down with one touch. In addition to the base Classic model, all RAV4 variants come equipped with VSC vehicle stability control, 6 airbags, TRC traction control system, HAC hill-start assist control, and an automatic limited-slip differential.
7
3
Share

How to Remove a Car Headlight Cover?

Steps to remove a car headlight cover: 1. Remove the headlight assembly, which is usually secured by clips or screws; 2. Use a heat gun to warm the edges of the cover to soften the adhesive, then gently pry the cover open; 3. Remove the headlight cover, clean out the old adhesive from the groove, apply new sealant, place the new cover, press firmly, and wipe away any excess sealant; 4. After drying, reinstall the headlight assembly. If the cover is broken, it is recommended to replace the entire headlight assembly as replacing just the cover may not ensure proper sealing. Car headlights, also known as car front lights or LED daytime running lights, serve as the 'eyes' of the car, not only affecting the owner's appearance but also being crucial for safe driving at night or in poor weather conditions.
3
5
Share

How to Enable Bluetooth in Older Car Models?

Method to enable Bluetooth in older car models: Locate the Bluetooth option on the car's central control screen main interface and tap to turn it on, allowing your phone to search for the car's Bluetooth. If the Bluetooth option is not found on the main interface, it is usually hidden in a secondary menu under the phone settings. Steps to connect Bluetooth in older car models: 1. Turn on the car's Bluetooth (if the car does not have Bluetooth, install an AUX Bluetooth receiver); 2. Enable Bluetooth on your phone; 3. Once the phone detects the car's Bluetooth, tap to pair and connect; 4. Enter the correct pairing code to successfully connect; 5. After successful connection, you can make calls and play music via Bluetooth.
16
5
Share

How to Deal with Brake Failure at High Speed?

When experiencing brake failure at high speed, it is crucial to remain calm. First, release the accelerator pedal and reduce the vehicle's speed by downshifting, using the handbrake, or utilizing road resistance. Aim to stop in a safe area as soon as possible and wait for assistance. In the event of brake failure at high speed, the handbrake can be used for braking, but it must be operated properly. Avoid yanking the handbrake abruptly out of panic, as this could cause the handbrake cable to snap due to excessive force, rendering the handbrake ineffective or locking the rear wheels, which may lead to loss of vehicle control. The correct method is to gradually pull up the handbrake, alternating between tightening and releasing it several times to slow down and stop the vehicle. For manual transmission vehicles, forced downshifting can also be used to decelerate and stop. The specific approach is to shift directly into second gear, then release the accelerator and lift the clutch. This will create a sensation similar to sudden braking. Subsequently, shift into first gear when appropriate, and you can turn off the ignition to utilize the engine's cylinder compression to bring the vehicle to a halt.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.