What needs to be done for a driver's license renewal?

What is the appropriate slope height for car passage at the entrance?

Generally, it should not exceed 15%. The straight gentle slope within 3.6 meters at the entrance and exit should be 7.5%, and the curved gentle slope within 2.4 meters should also be 7.5%. This prevents the front and rear chassis of the vehicle from scraping. Relevant introduction to car ramp slopes: Straight ramp: The ramp width should not be less than 1200, and the slope should not exceed 1:12. Double-turn ramp: The ramp width is 1200, the slope is 1:12, and the depth of the ramp start, end, and rest platform is 1500. L-shaped ramp: The ramp width is 1200, the slope is less than 1:12, and the depth of the ramp start, end, and rest platform is 1500. Slopes greater than 10%: When the slope exceeds 10%, gentle slopes should be set at both the upper and lower ends. The horizontal length of the straight gentle slope section should not be less than 3.6m, and the gentle slope gradient should be half of the ramp slope. The horizontal length of the curved gentle slope section should not be less than 2.4m, the curve radius should not be less than 20m, and the midpoint of the gentle slope section should be the original start or end point of the ramp.

1

3

Share

What engine does the Chery Cowin C3 use?

The Cowin C3 shares the same engine as the Chery E3, which is a domestically produced engine from Chery and is one of China's top ten engines. Below is a detailed introduction to the Cowin C3: 1. In terms of exterior design, the Cowin C3 adopts a styling similar to the Chery E2 sedan version. The front face of the car is very rounded, featuring a three-bar horizontal grille design that connects with the headlight assembly. The front bumper has an inverted trapezoidal shape and is equipped with fog lights on both sides. The rear design of the car is very compact, positioning it as a small car. 2. For the interior, the Cowin C3 has a simple design, combining black and beige colors with chrome accents, giving the car a very stylish appearance. In terms of configuration, the Cowin C3 comes standard with features like one-key car search and USB ports. The 1.5L manual Yellow Diamond trim and above also include power-adjustable exterior rearview mirrors. The top-of-the-line 1.5L manual Gold Diamond trim additionally features cruise control, a multifunction steering wheel, a 7-inch touchscreen, and a navigation system. 3. Under the hood, the Cowin C3 is powered by a 1.5L naturally aspirated engine, delivering a maximum power of 109 horsepower and a peak torque of 140 Nm. 4. The transmission system is paired with a 5-speed manual gearbox.

15

3

Share

What size tires does the Wuling Rongguang use?

All models are equipped with 175/70R14 tires. Here are the detailed specifications of the Wuling Rongguang: 1. The Wuling Rongguang is powered by two engines: a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine. 2. The 1.2L naturally aspirated engine delivers 82 horsepower and a maximum torque of 115 Nm. This engine reaches its maximum power at 5600 rpm and its maximum torque between 3600 to 4000 rpm. It features multi-point fuel injection technology, an aluminum cylinder head, and a cast iron cylinder block, paired with a 5-speed manual transmission. 3. The 1.5L naturally aspirated engine produces 107 horsepower and a maximum torque of 145 Nm. This engine achieves its maximum power at 5400 rpm and its maximum torque between 3600 to 4000 rpm. It also utilizes multi-point fuel injection technology, an aluminum cylinder head, and a cast iron block, mated to a 5-speed manual transmission. 4. The Wuling Rongguang features a MacPherson independent front suspension and a leaf spring rear suspension. The basic model measures 4135 mm in length, 1660 mm in width, 1870 mm in height, with a wheelbase of 2700 mm.

14

2

Share

What is the collision coefficient of the new generation Smart Run?

The new generation Smart Run received a five-star rating in the C-NCAP crash test, and achieved an M-level comprehensive score for occupant safety in the CIASI crash test. Here is an introduction to the new generation Smart Run: 1. Exterior: The vehicle dimensions are 4460×1850×1670mm, with a wheelbase of 2640mm. 2. Features: It is equipped with an intelligent safety assistance system, tire pressure monitoring system, EPB electronic parking brake + auto hold. Additionally, it features a panoramic sunroof, 7-inch full-color instrument cluster, 8-way adjustable seats, automatic climate control, and an air purification system.

16

0

Share

How Many Class Hours for Subject 2?

Generally, the class hours for C1 Subject 2 are 16 hours, while for C2 Subject 2, it's 14 hours. However, the actual time required may vary depending on individual progress. Faster learners may need less time, while others may require more. Duration of Subject 2 Class Hours: Each class hour is 60 minutes, with effective teaching time not less than 45 minutes. Additionally, each student's daily classroom learning and practical operation time should not exceed 4 hours; that is, a maximum of 4 class hours can be logged per day, and any excess will not be recorded by the system. Notes for Subject 2 Exam: Drive the car to the stop line position for the right reverse parking, stop when your shoulder aligns with the stop line, and shift into reverse gear to start the parking. When entering the side parking test area, use the raised part of the wiper as a reference to follow the road edge line. Before entering the curve driving test area, position the vehicle slightly to the left to enter the curve. After driving into the curve, exit from the other end. Upon entering the right-angle turn area, determine whether it's a right or left turn. Before ascending the slope, maintain a 30 cm distance between the vehicle body and the road edge line, and drive straight.

8

4

Share

What are the main components of brake fluid?

There are three types of brake fluid: 1. Castor oil-alcohol type, which is made by blending 45% to 55% refined castor oil with 55% to 45% low-carbon alcohol (ethanol or butanol). 2. Synthetic type, which is made by blending ethers, alcohols, esters, etc. with additives such as lubricants, antioxidants, rust inhibitors, and rubber swelling inhibitors. 3. Mineral oil type, which is made by blending refined light diesel oil fractions with thickeners and other additives. The method for replacing brake fluid: 1. Turn off the vehicle and open the engine compartment cover. Use a syringe to extract the fluid from the reservoir until it reaches the bottom. 2. Fill the reservoir with new brake fluid. 3. Use a jack to lift the vehicle, starting with the rear wheels, and remove the tires. 4. Locate the brake caliper's bleed screw and remove the rubber dust cap. 5. Use a wrench to loosen the bleed screw, attach a rubber tube to it, and connect the other end to a drain bottle. 6. Go inside the vehicle and start pumping the brakes. If the fluid coming out of the rubber tube is the lighter new fluid, the fluid change for that wheel is complete. Stop pumping the brakes, reinstall the tire, and repeat the process for the remaining three wheels. 7. After all four wheels have been bled, check the fluid level in the engine compartment reservoir. If it has reached the lower limit, add new brake fluid as needed.

7

3

Share

What needs to be done for a driver's license renewal?

What is the appropriate slope height for car passage at the entrance?

What engine does the Chery Cowin C3 use?

What size tires does the Wuling Rongguang use?

What is the collision coefficient of the new generation Smart Run?

How Many Class Hours for Subject 2?

What are the main components of brake fluid?

Can 3 points deducted for no annual inspection be deducted from someone else's license?

What does 'cruise' displayed on the car mean?

What is the national emission standard for a 2004 vehicle?

How to Turn Off the Engine Auto Start-Stop?