What name to call when activating the Hongqi voice assistant?

2 Answers
SanIsabella
07/29/25 6:50am
You can activate the voice assistant by saying "Hello Hongqi" or setting a custom nickname. Below are the specifications of the Hongqi H5: 1. Exterior: The Hongqi H5 features an inverted trapezoidal grille with vertical chrome trim strips, similar to the new H7 model. The angled corners at the upper left and right perfectly integrate with the full LED headlight assembly, complemented by bold lines outlining the grille, exuding youthful vitality. Dimensions: 4935/1840/1470mm (L/W/H) with a 2870mm wheelbase. 2. Interior: Standard equipment includes a power sunroof, 8-speaker audio system, automatic climate control with dual-zone function, PM2.5 filtration, 7-inch digital instrument cluster, 10-inch central touchscreen, 4 airbags, and tire pressure monitoring. Additionally, it pioneers the BOSCH 9.3-generation ESP system. 3. Powertrain: Equipped with a 1.8T turbocharged inline-4 cylinder engine featuring auto start-stop, delivering 137kW (186PS) maximum power and 250N·m peak torque, paired with a 6-speed automatic transmission.
Was this review help?
7
5
Share
LaBrynlee
08/12/25 10:12am
I used to drive a Hongqi H9, where saying 'Hi, Hongqi' to wake up the voice assistant felt as natural as calling a friend's name. Now, with my new car, I still use the same phrase to activate the smart assistant. In the morning rush, saying 'Hi Hongqi, navigate to the office' instantly brings up the route; when bored in traffic, commanding 'Play some rock music' gets the sound system pumping right away. The voice interaction responds super fast and even understands dialects—last time, my relatives from Shandong used it, and it comprehended them perfectly. I once tried changing the wake-up word but didn't succeed; the manual states it's set by default. Still, getting used to it, I find it much safer than fumbling for buttons while driving.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

How to Turn Off the Auto Start-Stop Function in Corolla Hybrid?

Auto start-stop is enabled by default. When the car starts, the auto start-stop system is in normal working condition. To turn it off, simply press the auto start-stop button. When encountering traffic lights or stopping for other reasons while driving, step on the brake, and the engine will automatically shut off after two seconds. Releasing the brake and stepping on the accelerator, or lightly turning the steering wheel will restart the engine. Additional details: 1. The COROLLA HYBRID features a highly distinctive and advanced exterior design. 2. The front fascia incorporates slim LED headlights and 'lightning-shaped' LED position lights, complemented by chrome trim with both glossy and matte finishes, exuding a premium feel. The rear features three-dimensional LED taillights with smoked lenses, achieving a perfect balance between sportiness and elegance. 3. The hybrid-specific instrument panel and gearshift lever highlight the COROLLA HYBRID's advanced and premium qualities. The hybrid-exclusive instrument panel, dedicated center console, and added stitching further enhance the sense of sophistication and advancement. The center console and door trims adopt a black wood grain design, showcasing a high-end texture.
6
2
Share

What is the actual measured ground clearance of the GL8?

In an unloaded state, the ground clearance of the vehicle is 160mm. The minimum ground clearance of the older model is 144mm, while that of the newer model is 147mm. The minimum ground clearance of a vehicle refers to the distance between the lowest point of the vehicle (excluding the wheels) and the ground when the vehicle is either unloaded or fully loaded. Below is an introduction to the Buick GL8: The Buick GL8, as a top-tier MPV, has been exported in large quantities due to its luxurious appearance, powerful performance, and spacious comfort, earning it the title of the perfect MPV by Southeast Asian media. The height of the chassis directly affects the vehicle's off-road capability. Chassis height: For family sedans, the chassis height should be no less than 110mm and no more than 150mm. Based on this parameter, if the chassis height exceeds 13cm, the sedan can more easily navigate various complex road surfaces, but its high-speed stability is poorer. If the chassis height is below 110mm, the vehicle's stability at high speeds is better, but the downside is that its off-road capability is reduced. Some vehicles now come equipped with air suspension, which can automatically adjust the chassis height at any time to better meet the needs of different road surfaces.
18
4
Share

How many liters does a full tank of the Citroen C-Quatre hold?

All models of the Citroen C-Quatre have a full tank capacity of 60 liters. The vehicle's engine features natural aspiration intake, a manual transmission (MT), and front-engine, front-wheel drive. In the same vehicle class, the Xingrui 2021 2.0TD Elite model has a fuel tank capacity of 50 liters, while the Civic 2022 180TURBO CVT Dynamic Edition has a fuel tank capacity of 47 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by automobile manufacturers is measured from the bottom of the tank to the safe fill limit. There is additional space from the safe fill limit to the tank opening, which is reserved to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the needle is close to E, it indicates the fuel is nearly depleted, and when it's near F, it means the fuel level is sufficient.
2
5
Share

What is the function of the car ambient temperature sensor?

The function of the car temperature sensor is: To detect the external ambient temperature, and the control system will determine the control method based on the difference between the external temperature and the internal temperature; To provide the ECU with the temperature signal outside the vehicle cabin. The ECU compares this signal with the internal temperature signal to determine the temperature inside the cabin, meeting the needs of the occupants. For example: If the external temperature is 5 degrees and the internal temperature is 30 degrees, the temperature difference is too large. The ECU will control the air conditioning to work, reducing the internal temperature to around 20 degrees, ensuring that the occupants do not feel too hot or too cold. The car temperature sensor is installed on the front bumper mounting bracket and is a thermistor. Characteristics of a faulty car temperature sensor: When the car's temperature sensor is damaged, the engine may overheat, and a yellow coolant temperature warning light will appear on the dashboard to alert the driver to check it; When the car's temperature sensor is damaged, the vehicle may also experience difficulty starting when cold because the system will incorrectly determine that the engine oil and coolant temperatures are too low, preventing normal operation and making the engine hard to start. The car temperature sensor controls the temperature of the engine oil and coolant, helping the engine run better. If the temperature sensor is damaged, the engine's normal operation may be affected, potentially leading to overheating. In such cases, the temperature sensor should be repaired or replaced promptly.
3
3
Share

What is the fuel consumption of the Lincoln Navigator 3.5t?

The official combined fuel consumption of the Lincoln Navigator 3.5t is 11.4L/100km. Here is some relevant information: 1. Vehicle positioning: The Lincoln Navigator is a luxury full-size SUV produced by Ford Motor Company, with dimensions of 5350mm*2073mm*1937mm. 2. Powertrain: Equipped with a 5.4-liter V8 engine, it delivers a maximum output power of 224 kW and a maximum torque of 490 N·m, providing robust performance. Paired with a 6-speed 2F automatic transmission, it offers either two-wheel or four-wheel drive.
11
1
Share

What is the one-touch window function of the Sagitar?

The one-touch window function of the Sagitar refers to a system where the car window glass can be controlled to move up or down with a single press of a button. Here are some of its features: 1. The one-touch window button for the Volkswagen Sagitar is located on the driver's door armrest. 2. Press and hold the lock button, and the windows will automatically close; press and hold the unlock button, and the windows will automatically open. 3. In addition to the control on the door armrest, the windows can also be controlled with the key for one-touch operation. Press and hold the lock button for 3 seconds, and all window glasses will automatically rise; press and hold the unlock button for 3 seconds, and all four windows will automatically lower.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.