What Must a Car Be Equipped With?

What Are the Reasons for Difficulty in Starting a Hot Engine?

Difficulty in starting a hot engine is often due to a dead battery. The reasons for failing to start when powered are as follows: Dead Battery: A dead battery can be recharged using a battery charger. Connect the power source and let the car idle for about ten minutes to charge the battery, which should be sufficient to fully charge it. Alternatively, you can directly replace it with a new battery. If the key battery is dead, simply replace the button battery. Issues with Components in the Vehicle's Ignition System: If there are problems with components in the vehicle's ignition system, it can be more complicated. You will need to troubleshoot step by step to identify the faulty component. For example, severe carbon buildup on spark plugs or ignition wires can lead to difficulty in starting. Additionally, a faulty alternator or fuel pump pressure leakage can also cause the engine to fail to start. Therefore, it is recommended to take the vehicle to a 4S shop for inspection and repair.

9

3

Share

Is the First Car Maintenance Required Within Three Months?

The first car maintenance is not required within three months. Here are the details about car maintenance: New car first maintenance content: Replace engine oil and oil filter; check the operation of the braking system, such as the gap and wear of brake pads and discs; tighten bolts of various systems; check and adjust the drive belt; check and adjust tire balance and alignment; check and replenish various fluids; check the operation of components like lights, battery, shock absorbers, etc. Purpose of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.

3

5

Share

Does a New Turbocharged Car Need a Break-in Period?

New turbocharged engines do require a break-in period. The role of turbocharging: A turbocharged engine refers to an engine equipped with a turbocharger, which is essentially an air compressor that increases intake air volume by compressing air. Turbocharging technology is a method to enhance an engine's air intake capacity. Generally, when you see "Turbo" or "T" on the rear of a car, it indicates that the vehicle is equipped with a turbocharged engine. The purpose of the break-in period: The break-in period for a car refers to the initial driving phase of a new car or after a major overhaul, typically covering 1000 to 1500 kilometers. This is the essential mileage required to ensure that mechanical components fully contact, friction, adapt, and settle. The break-in period mainly involves the engine's break-in, including the break-in of major components such as the transmission and brakes.

19

1

Share

Can you park on the emergency lane of a highway?

Non-emergency parking is not allowed on the emergency lane of a highway. The following are precautions for changing tires on a highway: Parking the car on the emergency lane: When changing a tire, the vehicle should be parked on the emergency lane by the roadside. If the vehicle cannot move from the center of the highway lane, it is advisable to call for assistance, and all passengers should evacuate to a safe area outside the lane. Placing a triangular warning sign: Whether calling for assistance or changing the tire yourself, and whether the vehicle is parked in the center of the highway or on the emergency lane, a triangular warning sign must be placed behind the vehicle, and the hazard lights should be turned on. If the vehicle can still move, try not to stop in a tunnel or on a viaduct, as these are very dangerous locations. After changing the spare tire, leave the area as soon as possible and do not linger.

20

0

Share

Which button sprays the windshield washer fluid in a car?

Car windshield washer fluid button is typically located on the control lever on the right side of the steering wheel. The classification and usage precautions of windshield washer fluid are as follows: Classification of windshield washer fluid: 0-degree washer fluid is used in summer, while -2-degree and -35-degree washer fluids are used in winter. The special anti-freeze type remains unfrozen even at -4 degrees, making it suitable for extremely cold northern regions. Both 0-degree and -20-degree washer fluids have anti-freeze properties. Their functionalities are identical except for the different freezing temperatures, so they can be mixed. Usage precautions: In autumn and winter, the windshield washer fluid should have excellent cleaning and anti-freeze performance. For winter, the selection criterion is anti-freeze performance, and you should choose a washer fluid with a freezing point at least 10 degrees Celsius below the local minimum temperature.

19

1

Share

How to Release Excess Car Refrigerant?

Before discharging and recovering the refrigerant, it is necessary to prepare a car refrigerant recovery and charging machine as well as a refrigerant tank with sufficient remaining capacity. Connect the pipelines of the car refrigerant recovery and charging machine to the high and low pressure pipes of the car's air conditioning system. After ensuring the pipelines are correctly connected and the self-check of the refrigerant recovery and charging machine is completed, set the required refrigerant recovery capacity and start the recovery process. At this point, the car refrigerant recovery and charging machine will automatically begin discharging and recovering the excess refrigerant. Below is additional information: Car refrigerant: Refrigerant, also known as coolant or refrigerant (commonly referred to as "Freon" in some regions), is the medium substance used in various thermal systems to facilitate energy conversion. These substances typically undergo reversible phase changes (such as gas-liquid phase transitions) to enhance efficiency. Examples include steam in steam engines and refrigerant in refrigeration systems. Generally, a steam engine releases the thermal energy of steam, converting it into mechanical energy to generate power, while the refrigerant in a refrigeration system is used to transfer heat from low-temperature areas to high-temperature areas.

7

0

Share

What Must a Car Be Equipped With?

What Are the Reasons for Difficulty in Starting a Hot Engine?

Is the First Car Maintenance Required Within Three Months?

Does a New Turbocharged Car Need a Break-in Period?

Can you park on the emergency lane of a highway?

Which button sprays the windshield washer fluid in a car?

How to Release Excess Car Refrigerant?

What can be done if there is friction noise when the car window is raised or lowered?

What lights to use for 150 meters at night?

How to Disassemble the JAC Refine S3 Car Key?

How to cancel the eco display on Mercedes-Benz?