What models of fog lights are used for modifying the Volkswagen New Lavida?
1 Answers
When modifying the fog lights of the Volkswagen New Lavida, the fog light model required is H11, and the high/low beam light models are H1 and H7. Here is the relevant introduction: 1. Fog lights generally refer to the fog lights of a car. 2. Steps for installing fog lights on the Lavida: (1) Prepare a flat-head and Phillips screwdriver. (2) First, remove the front bumper. Before removing the front bumper, the grille must also be removed, using the screwdrivers. (3) There are screws inside the front fender liners, and there are six 10mm screws under the front bumper. Once all are removed, the front bumper can be taken off (the front bumper clips are quite tight, so be careful not to damage them when applying force). 3. The fog light switch generally has three positions: position 0 is off, the first position controls the front fog lights, and the second position controls the rear fog lights. 4. When the first position is engaged, the front fog lights work; when the second position is engaged, both front and rear fog lights work together. 5. The installation position of fog lights must be below the bumper and as close to the ground as possible to ensure their effectiveness. If installed too high, the light cannot penetrate the rain and fog to illuminate the road (fog is generally thinner below 1 meter), which can easily lead to danger.
