What models does Geely offer?

What are the methods to handle the urea warning fault light?

Urea warning fault light can be handled by: 1. Replacing the urea solution; 2. Replacing the water heating valve; 3. Replacing the urea pump and power supply module connector. The reasons for the urea light warning are: 1. Low urea pressure, high urea consumption; 2. Insufficient power, urea consumption too high or too low; 3. Instrument panel failure. The effects of not using urea are: 1. Excessive emissions, causing environmental pollution; 2. Chemicals in the car system will oxidize, the urea nozzle will be blocked, rendering the entire system useless; 3. Decreased vehicle power. The role of urea is: to treat exhaust gases, reduce pollutants in the exhaust, and optimize engine performance and fuel consumption.

17

1

Share

What is the lowwash indicator light on a Buick vehicle?

lowwash is the windshield washer fluid level indicator light on Buick vehicles. The functions of windshield washer fluid are: 1. Cleaning debris from the windshield; 2. Lowering the freezing point of the liquid; 3. Ensuring the windshield remains clear and transparent for optimal visibility; 4. Eliminating electrical charges on the glass surface; 5. Reducing friction between wipers and glass to prevent scratches. Buick's vehicle models include: Buick GL8, Buick Excelle, Buick Regal, Buick LaCrosse, Buick Envision, etc. Taking the 2021 Buick GL8 as an example, it is an MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, and a wheelbase of 3088mm.

3

1

Share

How to Unlock the Car When the Key is Locked Inside?

Methods to unlock the car door using the car key are: Mechanical key: Insert the mechanical key directly into the keyhole on the door to unlock it; Remote key: Press the unlock button to open the door. Method to replace the car key battery: Purchase the original battery for the car key, ensuring the voltage and model are the same; Remove the mechanical key, usually by pressing a small button, then pull it out; Use a small flat-head screwdriver to pry open the car key. There is a small gap in the middle of the key, and a gentle twist will open it; Pry out the old battery, install the new one, and reassemble the car key after installation. Reasons for car key failure: Car key issues: During daily use, the car key may run out of battery. Pay attention to the usage method while driving, keeping the locking and unlocking distance closer, as the farther the remote distance, the more power it consumes. Avoid pressing the remote key multiple times when locking the car; Car issues: When the car battery is low on power, the car key may also become unresponsive. It is necessary to monitor the car battery’s charge during use to prevent it from running out while driving, which could affect normal usage; Environmental issues: When parking, if the car is parked in an area with strong magnetic fields or where thieves may be using signal jammers to steal important items from the car, it may result in the inability to lock or unlock the car door.

5

4

Share

Is Manual Transmission Subject 2 Easier or Subject 3?

Subject 3 is more difficult than Subject 2. It's actually quite straightforward to understand. The pass rates tell the story. Last year during the exam, the pass rate for Subject 2 was approximately between 60-80%, while for Subject 3 it was around 40-50%. Since the end of 2013, the standards have relaxed slightly compared to earlier, leading to an increase in pass rates for both. However, Subject 2 consistently maintains a significantly higher pass rate than Subject 3. With sufficient practice, passing Subject 2 is relatively easy. For Subject 3, even with extensive practice, improvement isn't always guaranteed. Below are the examination processes for Subject 2 and Subject 3: 1. Subject 2: Conducted within the test center. Only requires engaging 1st gear without shifting to higher gears, and doesn't involve using the accelerator pedal. The vehicle is typically adjusted so that releasing the clutch provides enough power to move. Thus, after engaging 1st gear, the entire operation can be completed by simply using the brake and modulating the clutch. 2. Subject 3: Involves actual on-road driving. Requires clutch control, gear shifting, and quick adaptation to situations. The difficulty lies in the unpredictability of scenarios. For instance: a car might suddenly emerge at an intersection, or traffic flow at a roundabout is variable with no fixed pattern—sometimes light allowing smooth passage in 3rd gear, other times heavy requiring stops and shifts between 1st, 2nd, and 3rd gears without disrupting normal traffic. Additionally, navigating traffic lights or pedestrian crossings with jaywalkers or illegal U-turning vehicles can unsettle examinees, testing their ability to drive safely and adapt. Gear changes must be made promptly as needed.

18

1

Share

Can You Change the Oil Filter Without Changing the Oil?

It is not advisable to change only the oil without replacing the oil filter in a car. Here are specific details about the oil filter: 1. Introduction: The oil filter, short for oil cleaner, removes impurities such as dust, metal particles, carbon deposits, and soot particles from the oil, supplying clean oil to moving parts like the crankshaft, connecting rod, camshaft, turbocharger, and piston rings. It plays a role in lubrication, cooling, and cleaning, thereby extending the lifespan of these components. 2. Efficiency: After being used for a period, the filter element accumulates sludge and metal debris, reducing its filtering efficiency and significantly decreasing the oil pressure passing through the filter. 3. Working Principle: When the oil pressure drops to a certain level, the oil filter bypass valve opens, allowing unfiltered oil to enter the oil circuit through the bypass. The impurities carried can increase wear on mechanical parts and, in severe cases, may clog the oil passages, leading to mechanical failures.

6

4

Share

Does the Dash Cam Still Record When the Car is Turned Off?

When the car is turned off, the dash cam will stop recording as it relies on the car's electrical power to operate. Once the vehicle is powered down, the dash cam ceases to function. The purposes of a dash cam include: 1. Recording video and audio of the entire driving process; 2. Serving as a parking monitor; 3. Providing footage to assist in accident resolution. Installation steps for a dash cam: 1. Mount the dash cam rearview mirror; 2. Route the wiring; 3. Install the camera near the rear license plate; 4. Connect the camera wiring harness to the dash cam. How to use a dash cam: 1. Insert the memory card and press the power button to turn it on; 2. Press the mode button to switch between video recording, photo taking, and preview modes; 3. Selecting video recording mode will automatically start recording.

14

4

Share

What models does Geely offer?

What are the methods to handle the urea warning fault light?

What is the lowwash indicator light on a Buick vehicle?

How to Unlock the Car When the Key is Locked Inside?

Is Manual Transmission Subject 2 Easier or Subject 3?

Can You Change the Oil Filter Without Changing the Oil?

Does the Dash Cam Still Record When the Car is Turned Off?

How many kilometers should a car drive for its first maintenance?

What are the symptoms of coolant boiling?

What is naaats tire?

What is the emission standard for a 15-year-old car?