What models does GAC Honda have?

What does the 'M' in an automatic transmission mean?

Automatic transmission's 'M' refers to the manual mode, where the driver manually completes the gear shift when the gear lever is placed in the 'M' position. Introduction to automatic transmission gears: 1. 'P' stands for Parking gear, used when the vehicle is parked for an extended period; 2. 'R' stands for Reverse gear, engaged when the vehicle needs to move backward; 3. 'N' stands for Neutral gear, used when the vehicle is parked briefly without turning off the engine; 4. 'D' stands for Drive gear, where the vehicle automatically shifts gears based on throttle opening and speed data when the gear lever is in 'D'; 5. 'S' stands for Sport mode, making the vehicle's driving more sporty; 6. 'L' stands for Low gear.

20

3

Share

What Causes the Windshield to Be Blurry After Wiping with Wipers?

Windshield becomes blurry after wiping with wipers due to: 1. Skipping during wiping; 2. Wiper blades aging or hardening; 3. Foreign objects stuck between the wiper and windshield; 4. Uneven wiper arm angle. Methods to address unclean wiping: 1. Clean the oily windshield with toothpaste; 2. Adjust the wiper arm using pliers; 3. Replace the wiper blades; 4. Remove foreign objects between the wiper and windshield; 5. Adjust the wiper arm angle. Steps to remove wipers: 1. Lift the wiper arm from the windshield; 2. Press the release lock and slide the wiper along the arm; 3. Remove the wiper for replacement.

10

5

Share

What is the method for disassembling wiper blades?

Wiper blade disassembly method: 1. Remove the end caps on both sides of the wiper; 2. Pull out the old wiper blade. A wiper refers to the blade structure installed in front of the windshield, consisting of an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The function of wipers: to remove rain, snow, and dust from the windshield that obstruct vision. Wipers can be classified by their driving methods into mechanical, vacuum, pneumatic, hydraulic, and electric types. Solutions for wipers not spraying water: 1. Use a sewing needle, pin, or thin steel wire to unclog the spray nozzle; 2. Add windshield washer fluid, replace damaged hoses, and tighten loose connections; 3. Repair or replace the motor and its wiring.

9

0

Share

What Causes Bubbles in Rear Windshield Tinting?

Rear windshield tinting may develop bubbles due to the following reasons: Impact of Heating Elements: The rear windshield contains numerous heating elements, which can affect the tinting to some extent. The presence of these heating elements causes the tint film to heat up when the rear windshield is warmed, leading to bubble formation. If there are numerous large bubbles, it is advisable to remove and reapply the tint film. Effect of Low-Quality Film: Over time, low-quality tint films exposed to UV rays may release toxic gases like formaldehyde, resulting in bubble formation. If bubbles appear due to this reason, it is necessary to replace the car's tint film immediately, as continued use can pose health risks.

15

1

Share

Is Vehicle Inspection Strict During National Day?

During the National Day holiday, traffic police conduct vehicle inspections, and they are stricter than usual. This is because many people gather to eat and drink during the holidays, inevitably encountering some individuals who disregard drunk driving laws. To prevent such incidents, traffic police officers work overtime to patrol the roads. Strict Crackdown on Illegal Vehicles: Operating illegal vehicles is unlawful. These vehicles solicit customers without proper documentation, evade taxes, and severely harm national interests. Such illegal vehicles are commonly found in high-traffic areas like train stations and bus terminals. Strict Crackdown on Motorcycles: Motorcycles have the advantages of being compact and fast. Their benefits become more pronounced during traffic congestion. However, many people mistakenly believe that a C1 or C2 driver's license allows them to operate a motorcycle. In reality, a specific motorcycle license is required to legally ride a motorcycle.

19

5

Share

What Are the Reasons for Stiff and Jerky Gear Shifting in Manual Transmission?

Manual transmission gear shifting can be stiff and jerky due to the following reasons: Rusty transmission shaft: A rusty transmission shaft prevents the clutch driven disc from moving smoothly. Poor return movement makes it difficult for the gears to engage along the normal path. Additionally, prolonged use or insufficient transmission oil can also lead to rust. Clutch malfunction: Insufficient clutch separation travel results in incomplete clutch disengagement, making it hard to shift gears. Alternatively, deformation of the clutch pressure plate assembly's drive plate due to certain reasons can cause poor separation. Cold gear shifting: Shifting gears in a cold car can make the gear feel stiff. After all, at lower temperatures, the viscosity of the gear oil in the transmission does not reach the ideal state, leading to suboptimal lubrication.

6

3

Share

What models does GAC Honda have?

What does the 'M' in an automatic transmission mean?

What Causes the Windshield to Be Blurry After Wiping with Wipers?

What is the method for disassembling wiper blades?

What Causes Bubbles in Rear Windshield Tinting?

Is Vehicle Inspection Strict During National Day?

What Are the Reasons for Stiff and Jerky Gear Shifting in Manual Transmission?

Should You Add Fuel Additive When Refueling a New Car?

What does PRND stand for in an automatic transmission?

Where is the sensor for automatic headlights located?

Can You Continue Driving When the Engine Fault Light Is On?