What models does domestically produced Mercedes-Benz have?

Does replacing the radiator count as a major accident?

If it's just a simple replacement of the radiator, it does not qualify as a major accident. Here are some relevant details: 1. Radiator: The car radiator, also known as the cooler, is responsible for cooling the circulating water. To prevent the engine from overheating, components around the combustion chamber (such as the cylinder liner, cylinder head, valves, etc.) must be properly cooled. The car engine cooling system primarily uses water cooling, circulating water through the cylinder water passages to cool them. The heated water from the water passages is directed to the radiator, where it is cooled by air before returning to the water passages. The radiator serves both as a water reservoir and a cooling device. 2. Malfunction: Over time, the hoses of the engine radiator can deteriorate and become prone to cracking, allowing water to easily enter the radiator. If a hose ruptures while driving, the high-temperature water can spray out, forming large clouds of steam from under the engine hood. In such cases, you should immediately pull over to a safe location and take emergency measures to address the issue.

16

0

Share

Will Running a Red Light Be Captured by Cameras?

If there are surveillance cameras, the vehicle will be photographed. Whether it's running a red light while turning left or going straight, it constitutes a traffic violation. According to the "Road Traffic Safety Law," vehicles must obey traffic signals, including traffic lights, signs, road markings, and the directions of traffic police. If both the left-turn and straight signals are green, proceeding straight from a left-turn lane violates lane regulations. When the left-turn signal is red, running the red light will result in penalties. The definition of running a red light while turning left: Running a red light is determined based on the vehicle's position relative to the stop line. If a vehicle crosses the line when the light is red, it is a violation. The camera primarily records the vehicle's movement during the red light, focusing on significant positional changes. If the front wheels cross the stop line just as the light turns red and the vehicle stops immediately, traffic authorities will not impose penalties. However, if the vehicle continues to move completely past the line, it is considered a violation and will be penalized. In other words, if a vehicle crosses the stop line during a red light and proceeds into the intersection, it constitutes running a red light. To avoid running a red light, consider the following points: Check the arrow signal first, then the circular signal: Currently, there are two types of traffic signals: arrow signals and circular signals. When arrow signals are present, drivers should first observe the arrow signal and then the circular signal to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow signal is red, right turns are prohibited, and violating this rule will result in penalties for running a red light. Brake in time: When the light turns red, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture the violation, leading to penalties for running a red light. If the front wheels have just crossed the stop line when the light turns red, the vehicle must wait for the next green light before proceeding. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown timer, use it to judge whether to proceed. If there is no timer, and the vehicle is close to the intersection with sufficient speed, it may proceed to avoid running a red light due to delayed braking. If the vehicle is far from the intersection or moving slowly, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct other vehicles or pedestrians. Running a red light is not considered a violation under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the act as running a red light. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, making it difficult for electronic police to discern traffic signals, evidence of violations may be unclear. In such cases, accidental red-light running will not be penalized. Emergencies: When transporting a critically ill patient to the hospital, running multiple red lights may occur. After delivering the patient, the driver can provide hospital documentation or testimony from the patient to the traffic police for verification. If confirmed, the violation records will be expunged. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at major intersections. Drivers must follow the gestures of the traffic police.

14

3

Share

What does it mean when the EPC light in a car comes on?

There are several reasons why the EPC light in a car may illuminate: 1. The throttle body is dirty and needs cleaning. 2. There is a malfunction with the brake switch or wiring. 3. There is an issue with the intake system. 4. The fuel being used does not meet the required standards. Additional information: Introduction to EPC: EPC (Electronic-Power-Control) stands for Engine Electronic Power Control System. This system consists of various sensors, controllers, and other components. When a sensor malfunctions or detects an abnormal condition, the control system will take appropriate measures based on pre-programmed settings.

5

2

Share

What is the reason for one brake light bulb being on and the other not?

The reason for one brake light bulb being on and the other not is: the filament of the brake light has melted. When used for a certain period, aging is quite normal, causing the brake light to fail to function properly, and it needs to be replaced promptly. A damaged brake light switch can affect the rear vehicle's accurate judgment of the braking action. A faulty brake light switch can result in the brake light staying on, not lighting up, or flickering intermittently. The method to replace the brake light switch: 1. Remove the protective panel above the brake and accelerator pedal to access the brake light switch; 2. Unplug the corresponding wiring harness and directly remove the brake light switch; 3. Install a new brake light switch and reassemble the components in the reverse order.

18

5

Share

How to Reset the Engine Malfunction Light Yourself?

To reset the engine malfunction light yourself, you can try removing the fuse to clear the fault codes. Common reasons for the engine light to illuminate include: 1. Overheating of the engine cooling system or cylinder block; 2. Failure of the catalytic converter; 3. Malfunctioning mass airflow sensor; 4. Throttle body issues. The functions of the engine malfunction light are: 1. To alert the driver by signaling that a fault has been detected and needs attention; 2. Before starting the engine, when the ignition is turned on, if the light does not illuminate (with the engine off), it indicates a fault in the warning light circuit; 3. To display fault codes—specific flash patterns can be used to retrieve stored fault codes from the engine control unit.

11

2

Share

How to Remove Adhesive from Car Film?

The methods to remove adhesive from car film are: 1. Use vinegar to remove adhesive. Apply vinegar evenly on the residual adhesive with a cotton swab, wait for the vinegar to blend with the adhesive, then slowly remove it with a cloth or scraper; 2. Use essential balm to remove adhesive. Apply the essential balm multiple times on the adhesive, then slowly scrape it off with a knife; 3. Use car heat insulation cleaner to remove adhesive. Spray the specialized car heat insulation cleaner on the adhesive to be removed, and the adhesive will melt immediately, then wipe it off with a cloth; 4. Use alcohol to remove adhesive. Apply alcohol on the adhesive to soften it, then slowly scrape it off with a knife. The main functions of car film are to block ultraviolet rays, reduce heat, prevent injuries caused by flying glass, reduce glare, and protect personal privacy based on the one-way transparency of the solar film.

18

5

Share

What models does domestically produced Mercedes-Benz have?

Does replacing the radiator count as a major accident?

Will Running a Red Light Be Captured by Cameras?

What does it mean when the EPC light in a car comes on?

What is the reason for one brake light bulb being on and the other not?

How to Reset the Engine Malfunction Light Yourself?

How to Remove Adhesive from Car Film?

Does the Volkswagen need to be rematched when replacing the air conditioning panel?

Can I Get Compensation for Water Damage Without Purchasing Water Wading Insurance?

Will the water damage insurance cover the cost if the engine is restarted after being submerged?

Will the Engine Get Water Ingress if the Air Filter Gets Wet?