What model transmission does the Volkswagen Bora have?

2 Answers
Dennis
07/23/25 11:20pm
Volkswagen Bora is equipped with an Aisin transmission. The 1.5L model of the Volkswagen Bora is paired with a 6-speed automatic manual transmission (6AT). The 1.4T model is equipped with a 7-speed dual-clutch transmission (7DCT). The 6AT transmission is from the Aisin brand, specifically the third-generation 6AT transmission from Aisin. Below is a detailed introduction to the dry-type transmission of the Volkswagen Bora: 1. The Volkswagen Bora uses a dry-type dual-clutch transmission. The clutch plates of the dry-type dual-clutch are directly exposed to the air, with gear meshing directly transmitting power. 2. The advantage of this design is high transmission efficiency. However, the drawbacks are also evident: it is prone to overheating, and if the clutch operates for long periods at low speeds or in a semi-engaged state, its service life can be significantly reduced.
Was this review help?
1
1
Share
OAllie
08/10/25 7:15pm
I've been researching the Volkswagen Bora recently, and its transmission configurations are quite varied—the specific models depend on the year and trim. Most Bora models use Volkswagen's own MQ-series manual transmissions, such as the MQ200 or MQ250, which offer light and precise shifting. For automatic transmissions, older models might be equipped with Aisin's 4-speed or 6-speed automatics, but later versions widely adopted DSG dual-clutch transmissions, like the 7-speed dry-clutch DQ200, known for high efficiency and fuel economy. Newer iterations even introduced the more advanced wet-clutch DQ381 DSG, improving smoothness and durability. Why did VW choose these? Because they prioritize fuel economy and driving experience, though early DSG units had overheating issues, which were later addressed. The transmission shifts quickly, making it great for city commutes, but regular maintenance is crucial—stick to oil change intervals to avoid failures. Overall, transmission choice significantly impacts driving enjoyment, so it's wise to verify the exact model before buying used.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What causes the BMW X1 P-gear lock failure?

There are several main reasons for the BMW X1 P-gear lock failure: Transmission lock hook stuck: Automatic transmissions have a locking mechanism. When parking, you should first engage the handbrake and then shift to P-gear. If you shift to P-gear first and the vehicle is parked on a slope, it may move slightly, causing the transmission gears to rotate, which can result in the internal lock hook getting stuck. Therefore, the handbrake must be used for long-term parking to avoid damaging the automatic transmission's locking mechanism. P-gear lock solenoid or brake failure: For safety reasons, to prevent accidentally shifting into other gears when starting the vehicle, there is a P-gear solenoid. This solenoid requires a signal from the brake pedal to release. These two components are interconnected, so if either one malfunctions, it can prevent the gear lever from being moved out of P-gear into other gears.
2
2
Share

What are the reasons for the Lavida stalling automatically?

Automatic transmission models do not stall easily, while manual transmission models may stall frequently due to poor driving skills. However, it is not impossible for automatic transmission cars to stall. The main reason is the use of low-quality fuel, which causes engine carbon buildup and leads to stalling. Introduction to stalling: Stalling, also known as flameout, occurs when the reactor is operating at a significant reaction rate. If the temperature at the feed inlet is reduced to the lower limit of the multiple steady-state region, the reaction rate suddenly drops significantly, and the reaction basically stops. Precautions: It is best to refuel at reputable, larger gas stations with higher-grade gasoline. Although the price may be higher, the quality of the gasoline is better.
16
5
Share

Does the Mercedes-Benz car come without an instruction manual?

Mercedes-Benz cars come with an instruction manual. Car instruction manual: The manual introduces the vehicle's usage methods and main technical parameters. Users must operate the vehicle reasonably in accordance with the requirements outlined in the instruction manual. Introduction to the manual: The manual is a practical document that provides relatively detailed descriptions of something or an object, making it easier for people to understand and familiarize themselves with it.
9
1
Share

Where is the foot brake on a Nissan?

Manual transmission cars have three pedals, from left to right: clutch, brake, and accelerator. Automatic transmission cars have two pedals, from left to right: brake pedal and accelerator pedal. Introduction to brakes: Brakes, also known as stopping devices, refer to the action of stopping or reducing the speed of moving locomotives, vehicles, and other transportation tools or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install corresponding brake shoes, belts, or discs on the machine base, which generate braking torque under external force. Location of the car brake pedal: The car brake pedal is located under the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake shoes on the brake drum, clamping the brake disc and causing the car to decelerate or stop.
18
3
Share

Where is the VIN number located on a Nissan Bluebird?

Common locations: on the vehicle's nameplate, near the driver's side of the windshield, or under the front passenger seat. Introduction to the VIN: The VIN is the Vehicle Identification Number, an abbreviation of Vehicle-Identification-Number in English. Regulations regarding the VIN: According to SAE standards, the VIN consists of 17 characters, hence it is commonly referred to as the 17-digit code. It contains information about the vehicle's manufacturer, year of production, model, body type and code, engine code, and assembly location, among other details. Correctly interpreting the VIN is crucial for accurately identifying the vehicle model and ensuring proper diagnosis and maintenance.
20
1
Share

Can the auxiliary battery of a Mercedes-Benz be recharged?

The auxiliary battery of a Mercedes-Benz can be recharged, but there is no need to deliberately charge it as long as the vehicle can start. The auxiliary battery is specifically responsible for the engine start-stop function and is unrelated to the main battery, so it does not affect normal driving. However, it may sometimes cause the dashboard not to display the instrument status, and the automatic start-stop function may not work. Introduction to the auxiliary battery: The "auxiliary battery" is not actually a battery but a capacitor or a sensor. Auxiliary battery failure: Repairs should be based on the meaning of the fault code. Possible issues include low battery voltage, battery damage, or faults in the wiring or control circuits.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.