What model of fog lights is used for modifying the Volkswagen New Lavida?

2 Answers
AdrianaLee
07/24/25 7:25am
For modifying the fog lights of the Volkswagen New Lavida, the H11 model is used, while the high and low beam lights are models H1 and H7. The installation position of fog lights must be below the bumper and at the lowest point of the body closest to the ground to ensure their effectiveness. If installed too high, the light cannot penetrate rain and fog to illuminate the road surface, which can easily lead to danger. The dimensions of the Volkswagen New Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The vehicle is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power of 110kW and a maximum torque of 250Nm.
Was this review help?
6
5
Share
DelColton
08/11/25 3:09am
I modified the fog lights on my Volkswagen New Lavida, using H8 bulbs, and the effect is excellent. My car is the 2022 model, and I installed Philips H8 LED bulbs bought online for about 250 yuan. The installation was a bit tricky, requiring the removal of several screws under the front bumper, so patience is needed. This modification improves brightness and visibility in rainy conditions, making it much safer. Choosing the correct model is key—the New Lavida generally uses H8 or H11; checking the manual or confirming with a 4S shop is more reliable. I recommend avoiding off-brand bulbs as they can easily blow fuses; LED bulbs last longer, save energy, and provide even brightness without glare. Remember to turn off the power when working on it to prevent accidents, and it takes about an hour to complete.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

How to Check if You Passed the Driving Test Subject 3?

You can check whether you passed Subject 3 of the driving test. Below is an introduction to the driving test: 1. Introduction to the driving test: The driver's test (motor vehicle driver's test) is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can you obtain a driver's license and legally operate a motor vehicle. 2. Process of the driving test: Applicants for a motor vehicle driver's license must pass the following four subjects: Subject 1 (traffic safety laws, regulations, and related knowledge test), Subject 2 (field driving skills test), Subject 3 (road driving skills test), and Subject 4 (safe and civilized driving knowledge test).
20
5
Share

How Many Days to Clear Overtime Driving Records?

Here are the methods to clear overtime driving records: Enter the menu and select the corresponding function. If it's a locked video, formatting the card will suffice. Below is additional information on fatigue driving: 1. Fatigue Driving: If you drive continuously for 4 hours, only swapping cards without changing drivers and continuing to drive without rest, this is considered fatigue driving. This behavior is highly prone to traffic accidents because driving requires significant concentration. Fatigue driving can lead to delayed reactions, drowsiness, and physical weakness, making it difficult to promptly detect road conditions and take accurate driving actions. 2. Non-Fatigue Driving: If there are two drivers in the vehicle's cabin, and the cards are swapped within 4 hours with the driver changing for more than 20 minutes, this does not constitute fatigue driving.
3
5
Share

Does a small area of paint peeling on the car door require a full repaint?

A small area of paint peeling on the car door does not require a full repaint. Here are the details regarding car door paint repair: 1. Reason: A small area of paint peeling on the car door only requires local touch-up painting rather than a full repaint. Minor scratches on the car can be remedied with polishing and waxing, but for larger or deeper scratches, it is advisable to visit a professional repair shop to avoid uneven color caused by DIY repairs. 2. Precautions: The car's paint surface requires frequent maintenance. Many minor scratches on the car body are caused by improper washing, especially for vehicles with white paint, which should not be exposed to prolonged outdoor sunlight as it may lead to yellowing over time. Therefore, frequent vehicle maintenance is necessary.
17
3
Share

How Far Can You Drive After One Bar on the Fuel Gauge Disappears?

When one bar on the fuel gauge disappears, you can typically drive 30-50 kilometers. Below is an introduction to fuel gauges: 1. Introduction to Fuel Gauges: The fuel gauge indicates the amount of fuel remaining in the car's fuel tank. It can be either a pointer-type or a digital display. The fuel gauge consists of a fuel level indicator with a voltage regulator and a fuel level sensor. 2. Usage Notes for Fuel Gauges: (1) Do not wait until the warning light comes on to refuel: Since the fuel pump is located inside the fuel tank and relies on fuel for cooling and lubrication, having too little fuel can adversely affect the pump's operation and reduce its lifespan. (2) It is not recommended to fill the tank completely: Because gasoline expands when heated and evaporates into gasoline vapor in high summer temperatures, space is needed to accommodate these changes.
5
2
Share

What does excessive delay in camshaft position timing mean?

Excessive delay in camshaft intake timing means: The timing system of the car engine will experience ignition delay. This can lead to excessive engine vibration and difficulty in starting the engine. Here is some additional information about engine timing ignition: 1. At idle, there is a clear rhythmic metal knocking sound, and the sound intensifies as the engine speed increases. This indicates axial displacement of the timing gear or damage to individual gear teeth. Generally, the engine timing transmission in cars is belt-driven. If regular maintenance and adjustments are not performed, timing belt jumping may occur. This can cause abnormal engine noises, poor acceleration, and lack of power. 2. If the belt jumping is severe, the engine may experience shaking, difficulty in starting, and even damage to the valves.
3
5
Share

Is Vehicle Repainting the Same as the Original Factory Paint?

No, repainted areas lack the electrophoretic layer, consisting only of the color touch-up layer and clear coat layer. This often leads to color discrepancies and severe paint aging over time. Below are relevant details: 1. Original Factory Paint: Comprises four layers—electrophoretic layer, primer coat, base color layer, and clear coat layer. The electrophoretic layer directly bonds to the metal body, serving as an anti-corrosion barrier. The primer coat, applied over the electrophoretic layer, protects it while enhancing corrosion resistance and improving adhesion for outer paint layers. The base color layer determines the visible vehicle color, with primer quality directly affecting its adhesion. The outermost clear coat primarily safeguards the base color, increasing hardness to resist minor scratches and offering some corrosion protection. 2. Repair Paint: Automotive repair paint differs from factory-applied paint. For instance, white paint tends to yellow with prolonged use, though the degree varies across paint types.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.