What model of battery does Tesla use?

1 Answers
MaciLee
07/30/25 4:45am
Tesla uses Panasonic NCR18650 batteries with a capacity of 3100mAh. The batteries are grouped twice in series and parallel configurations, equipped with sensors to monitor the working status and temperature of each battery cell. The battery control system manages these to prevent dangerous situations such as overheating, short circuits, or temperature variations. Tesla's Model X is a mid-to-large-sized pure electric SUV with body dimensions of 5037mm in length, 2070mm in width, and 1684mm in height, with a wheelbase of 2965mm. The Model X comes in two configurations: a Long Range version and a Performance version.
Was this review help?
18
2
Share
More Forum Discussions

What does the EPC light mean in an Audi?

The EPC warning light may illuminate during the power-on self-test or under other circumstances. The main reasons are: The power-on self-test is an indication that the vehicle is checking the status of all sensors before driving. Generally, if the engine is not started, the light will turn off by itself after about 3 seconds. If the EPC light remains on after the vehicle is started or illuminates under other circumstances, the possible causes include faults in the engine intake system, throttle valve, fuel system, engine, ECU control unit, or brake lights. The following are detailed explanations of the causes and solutions for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light may come on if the engine intake is obstructed or insufficient. You can open the intake manifold switch valve cover, place a listening rod against the switch valve, start the engine, and repeatedly press the accelerator pedal to clear the obstruction. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt accumulation can affect intake and trigger the light. You can remove the throttle position sensor and install a new one. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization can cause the light to illuminate. Use the appropriate fuel grade for your vehicle. Engine fault: Insufficient engine pressure or problems with the intake valves can also trigger the EPC light. Clean carbon deposits from the affected areas. Anti-theft system fault: If the anti-theft controller is incompatible with the engine electronic controller, the anti-theft system may prevent the engine from functioning properly, and the engine fault light may also illuminate. Visit a repair shop or dealership for assistance. ECU control unit fault: Issues such as signal interference or false alarms from the onboard computer can occur. Reprogram the ECU data. Brake light fault: If the brake lights are not working, the brake switch is faulty, or the brake wiring is defective, visit a repair shop or dealership to replace the brake lights. If the EPC light comes on, the owner can first try turning off the engine and restarting it to see if the light remains illuminated. If it does not, there may be no issue, and the light may have been triggered by a temporary condition. If the light stays on or frequently illuminates, drive to the nearest repair facility for professional diagnosis and timely resolution of potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions to address the issue. Common EPC warning lights are typically two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven cautiously to a repair facility. A red EPC light indicates a serious issue, and the vehicle should be pulled over immediately. Contact a professional for repairs, as continued driving may damage core components or compromise safety.
19
2
Share

How to Set the Current of a Battery Charger?

Battery charger current setting method: There is an adjustment knob to select the gear, just choose the appropriate current output. The standard current for battery charging is one-tenth of the battery capacity, which is generally better. Typically, the battery voltage of a household car is 12V, and the battery capacity is around 60Ah, meaning a charging current of 6A is normal. When the car engine is running, it drives the generator to operate. The electricity generated by the generator can power the car's electrical appliances, and another part of the electrical energy can charge the battery through a transformer. If the car is parked for a long time, it can easily lead to battery power loss, making the car unable to start. During long-term parking, it is recommended to start the vehicle once a week for more than 5 minutes to charge the battery.
7
3
Share

What type of vehicle is the Geely Xingyue?

Geely Xingyue is a coupe SUV based on the CMA architecture. It comes in seven colors: Zeus White, Knight Black, Glacier Silver, Thunder Gray, Hera Red, Neptune Blue, and Xingyue Gold. The dimensions of the Geely Xingyue are 4605mm in length, 1878mm in width, and 1643mm in height, with a wheelbase of 2700mm and a top speed of 200 km/h. The fuel tank capacity is 55L, and the trunk capacity is 326L. The engine delivers a maximum power of 130 kW and a maximum torque of 155 Nm. The front suspension is a MacPherson independent suspension, while the rear suspension is a multi-link independent suspension, with a front-wheel-drive system.
3
4
Share

What is the Difference Between Chery Jetour and Exeed?

Chery Jetour and Exeed differ in their positioning. Below is the relevant information: Jetour brand focuses on mid-to-low-end products: Since the launch of the product lineup, it has clearly stated its positioning in the travel niche market. Its exterior design leans towards a sporty and fashionable style, with a more youthful overall design that aligns with the aesthetic preferences of today's younger generation. Its market positioning is more affordable. Exeed brand focuses on mid-to-high-end products: The positioning is more flexible, aiming to attract consumers from different levels. Exeed features a sophisticated and minimalist exterior design, coupled with a high-tech interior and an outstanding powertrain system, which has garnered a large fan base. The brand positioning is slightly higher.
1
4
Share

Where is the USB port located in the Wrangler?

The USB port in the Wrangler is located inside the center armrest console. The main functions of the USB port in a vehicle are: utilizing the standard power supply in the car to charge electrical devices via the USB interface or serving as a fixed power interface for electrical devices. The USB port is a type of vehicle transmission cable, offering advantages such as fast transmission speed, ease of use, support for hot-swapping, flexible connectivity, and independent power supply. It is generally a universal port for connecting USB devices like flash drives and MP3 players. The Wrangler is the top-tier model in the Chrysler Jeep Wrangler series, with body dimensions of 4751mm in length, 1877mm in width, and 1840mm in height. The Wrangler is the most robust variant in the Jeep series, featuring a recirculating ball steering gear specifically designed for off-road vehicles to provide a durable steering system and a larger steering ratio. The use of spiral springs with a lower elastic coefficient enhances on-road driving comfort.
4
0
Share

What does it mean when a wrench light appears on the dashboard?

The reason a wrench light appears on the dashboard is that car manufacturers have set up a maintenance reminder function to alert owners to perform scheduled maintenance at specific mileage intervals. After maintenance is completed, the maintenance reminder light can only be turned off by following a certain reset procedure. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. Modern car maintenance mainly includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.