What model is the Toyota Wish?

Is it allowed to make a turn on a pedestrian crossing?

Making a turn on a pedestrian crossing is not allowed. If a vehicle needs to turn, it must do so after crossing the zebra crossing, following the guided route. Remember not to make a U-turn on the zebra crossing. Precautions for turning: When turning, the driver should, based on road and traffic conditions, signal the turn 50 meters before the curve and sound the horn to alert nearby vehicles and pedestrians. At the same time, the driver should appropriately reduce speed to maintain vehicle stability. Steering wheel operation should be coordinated with the speed, turning timely and returning early. After completing the turn, the turn signal should be promptly canceled. Yielding standards at pedestrian crossings: When pedestrians are crossing or about to step onto the zebra crossing in front of a motor vehicle, the motor vehicle should yield to the pedestrians. If pedestrians are waiting outside the separation line of the motor vehicle lane and non-motor vehicle lane and have not entered the motor vehicle lane, the motor vehicle should slow down and may proceed across the pedestrian crossing under safe conditions.

5

0

Share

How to Unlock an Airbag Seat That's Stuck?

If the airbag seat is locked, there is a locking handle on the seat adjustment lever. Simply pull the handle to unlock it. Airbag seats are typically equipped in long-distance buses and some trucks. These seats enhance driver comfort during long-distance driving. The height of the airbag seat can be adjusted via buttons, and the adjustment valve controls the inflation or deflation of the airbag to achieve seat height adjustment. Below are detailed explanations: 1. Car seats not only affect driving comfort and the fatigue levels of drivers but also ensure that the driver maintains a suitable sitting posture, which is crucial for driving safety. Airbag seats feature lumbar support and wrapping functions, fully leveraging the advantages of ergonomic design. They provide effective support for both the lower back and upper back, relieving pressure on the lumbar region. Even with prolonged use, issues like lumbar muscle strain can be avoided. Additionally, the lumbar support function, which allows for front and rear height adjustments, enables individuals of different body types to find their ideal support angle. 2. As the name suggests, airbag seats use air pressure as the seat carrier, placing the soft seat on a large airbag. Bumps from the road and vehicle body are effectively absorbed and dampened by the airbag's pressure fluctuations, achieving a shock-absorbing effect. Combined with the seat's lumbar support and wrapping features, this configuration further enhances the desired comfort. This cost-effective and highly effective truck feature has now become a standard in most domestically produced heavy-duty trucks.

20

3

Share

Can I drive normally without carrying the vehicle license with me?

"Driving without carrying the driver's license is not allowed. According to Article 95 of the 'Road Traffic Safety Law of the People's Republic of China,' motor vehicles driven on the road without displaying the vehicle license plate, inspection qualification mark, insurance mark, or without carrying the vehicle license or driver's license shall be detained by the traffic management department of the public security authority. The party involved shall be notified to provide the corresponding license, mark, or complete the necessary procedures, and may be penalized according to Article 90 of this law. The motor vehicle shall be promptly returned once the party provides the corresponding license, mark, or completes the necessary procedures. Article 104 of the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China' stipulates that if a motor vehicle driver commits any of the following acts and there is no other driver available to take over immediately, the traffic management department of the public security authority may, in addition to imposing penalties according to the law, move the vehicle to a location that does not obstruct traffic or to a place designated by the relevant authorities. Failing to present a valid driver's license; driving a vehicle that does not match the permitted vehicle type specified on the driver's license; driving under the influence of alcohol, controlled substances, or narcotics, or driving while suffering from a disease or fatigue that impairs safe driving; learner drivers driving alone without a coach accompanying them."

13

2

Share

What Causes the ABS System Abnormal Display on the Screen?

There are various conditions when the ABS warning light is on, with different causes and solutions for each condition. The details are as follows: Condition 1: ABS warning light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. Condition 2: ABS warning light intermittently turns on but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS warning light turns off. The ABS system's power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). Condition 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. Condition 4: ABS warning light turns on during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. Condition 5: ABS warning light intermittently turns on. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and push the brake switch linkage down fully with a finger, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

14

5

Share

What is the statute of limitations for a car scratch accident?

The statute of limitations for a car scratch accident is three years. According to Article 188 of the Civil Code of the People's Republic of China on the limitation of action: The limitation period for filing a lawsuit with the People's Court to protect civil rights is three years. If the law provides otherwise, such provisions shall prevail. The limitation period shall be counted from the date when the right holder knows or should have known that the right has been infringed and who the obligor is. If the law provides otherwise, such provisions shall prevail. However, if more than 20 years have passed since the date the right was infringed, the People's Court shall not protect it. Under special circumstances, the People's Court may extend the period based on the right holder's application. Car scratch accident reporting process: Park and check the situation: After a car accidentally scratches another vehicle, immediately choose a suitable location to stop. Engage the handbrake, cut off the power, and turn off the engine. At night, turn on the width lights and taillights. On highways, set up a hazard warning sign behind the vehicle. Confirm the safety of both parties: Check the safety of all involved. If there are fatalities, injuries, or threats to personal safety, call the police immediately. For situations not requiring police involvement, parties can choose to reach an agreement privately for quick resolution. Record basic information: Document the vehicle and owner details of both parties. Record license plate numbers, driver's licenses, vehicle registration certificates, and insurance information. Document vehicle damage: Carefully inspect the vehicle condition. Use digital cameras or mobile phones to photograph the scratched areas and overall vehicle condition. Ensure both parties are visible in the photos, and take multiple angles of the front, rear, and damaged areas. Clarify liability: Pay special attention to the responsibilities assigned by traffic police during the liability determination. Assess damage for claims: First, visit an insurance claims service center to assess vehicle damage. Keep all repair invoices during the repair process.

6

3

Share

What is ABS on a car?

ABS on a car stands for Anti-lock Braking System. During braking, ABS automatically controls the braking force to prevent the wheels from locking up, keeping them in a rolling-sliding state to maintain maximum traction between the tires and the road. When braking, ABS quickly detects wheel lock-up based on speed signals from each wheel speed sensor, then closes the normally open input solenoid valve for the locking wheel to maintain consistent braking force. If the ABS warning light on the dashboard illuminates during normal driving, it indicates a malfunction in the ABS system, meaning the ABS is not functioning properly.

1

5

Share

What model is the Toyota Wish?

Is it allowed to make a turn on a pedestrian crossing?

How to Unlock an Airbag Seat That's Stuck?

Can I drive normally without carrying the vehicle license with me?

What Causes the ABS System Abnormal Display on the Screen?

What is the statute of limitations for a car scratch accident?

What is ABS on a car?

What is the actual fuel consumption of the Honda XR-V?

What Maintenance is Needed for a Car at 80,000 Kilometers?

What is the best engine oil for Volkswagen Golf?

How many spark plugs does a car need to replace?