What model is the Toyota Wish?

Will Manually Closing an Electric Trunk Cause Any Damage?

Manually closing an electric trunk will not cause any damage. Below are the detailed features of an electric trunk: 1. Manual & Automatic Opening: Drivers can open or close the trunk by pressing the trunk button, using the remote key, or waving a hand/object over the designated sensor area. This allows for easy access when hands are full. 2. Anti-Pinch Protection: Sensors detect obstacles during closing; if contact occurs, the trunk reverses direction to prevent injuries or damage. 3. Emergency Lock Function: The trunk can be stopped immediately via remote key or trunk button during operation if needed. 4. Height Memory: The opening height is adjustable. Owners can set their preferred height by manually opening the trunk to the desired position, then holding the trunk button for 5+ seconds. The trunk will automatically open to this preset height thereafter.

18

5

Share

How to Solve Door Squeaking Issues?

Solutions for door squeaking are as follows: 1. Squeaking when opening or closing the door: This is usually due to aging door hinges lacking lubrication. Hinges are the components connecting the car body and the door. Applying specialized grease to the door hinges can eliminate the squeaking. 2. Squeaking during driving: This is often caused by dust or other foreign objects on the door seal. Cleaning the seal and then applying a layer of soap can resolve the issue. If the squeaking persists after cleaning, it is recommended to replace the door seal. 3. Squeaking inside the door: This may be due to poor fit between the door panel and the door, gaps, or foreign objects inside, causing vibration and noise during driving. In such cases, it is advisable to visit a repair shop for inspection and maintenance.

19

3

Share

How to Deal with Car Shaking When Accelerating?

Here are the methods to handle car shaking when accelerating: 1. Inspect car components: Clean the throttle body and check the spark plugs, replacing them if necessary. 2. Wheel alignment and balancing: Car shaking indicates a weight imbalance between the tires and rims, so wheel alignment and balancing should be performed based on the actual situation. 3. Change the engine oil: Using inappropriate engine oil can also cause vibrations, such as overdue oil changes or excessive carbon buildup from prolonged low-speed driving. The reasons for car shaking are as follows: 1. Incomplete fuel combustion; 2. Severe engine carbon deposits; 3. Tire pressure being too high or too low.

3

Share

How to Change Transmission Fluid?

The method for changing transmission fluid is as follows: 1. Loosen the drain screw at the bottom of the transmission to drain the fluid and then refill: When the engine is turned off and the automatic transmission stops working, the oil pump becomes inactive, halting the circulation of automatic transmission fluid. Consequently, the fluid flowing in the valve body, pistons, torque converter, radiator, and cooling lines also stops abruptly, preventing it from flowing back into the oil pan. 2. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. 3. Use a circulation machine to change the automatic transmission fluid: A smart circulation machine can perform dynamic fluid changes, filtering and cleaning sludge and impurities inside the automatic transmission. It ensures an equal exchange of fluid, completely replacing the old fluid in the transmission, thoroughly cleaning the internal circulation, and providing the transmission with a good internal working environment, thereby extending its lifespan.

8

4

Share

How about the DCT wet dual-clutch transmission?

DCT wet dual-clutch transmission is relatively good, with the following advantages: 1. Seamless shifting: The dual-clutch transmission combines the advantages of manual and automatic transmissions, eliminating the torque converter and instead using two sets of clutches. The alternating operation of these two clutches achieves seamless shifting. 2. Full power utilization: Without a hydraulic torque converter, the engine's power can be fully utilized. Additionally, the alternating operation of the two clutches results in extremely short shift times, minimizing power interruption from the engine. 3. Lower fuel consumption: Due to more direct shifting and reduced power loss, fuel consumption can be reduced by more than 10%.

1

5

Share

What does ION mean in a car?

ION in a car refers to the air purification function. When ION is activated, the air purifier starts working. The new ION system mainly consists of two components: 1. PM2.5 sensor: Function: It measures the PM2.5 content in the air inside and outside the vehicle, serving as the basis for whether to automatically activate ION and displaying the measured PM2.5 concentration on the car's screen. Location: The sensor is installed inside the vehicle's dashboard, to the right of the blower, on the right front A-pillar. 2. Negative ion generator: Function: It boosts the 12V low voltage to hundreds of volts of high voltage, ionizing the air to form negative ions for air purification, dust removal, deodorization, and sterilization. Location: Installed between the blower and the evaporator.

10

2

Share

What model is the Toyota Wish?

Will Manually Closing an Electric Trunk Cause Any Damage?

How to Solve Door Squeaking Issues?

How to Deal with Car Shaking When Accelerating?

How to Change Transmission Fluid?

How about the DCT wet dual-clutch transmission?

What does ION mean in a car?

What brand of tire is Yokohama?

When is the release date of the China VI Highlander?

Changan Honor Tire Specifications

What's the reason for the car making a clicking sound but not starting even though it has power?