What model is the car driven by Mr. Bean?

1 Answers
Elle
07/29/25 10:44pm
The car driven by Mr. Bean is a Mini-Cooper. Here are the relevant details about the 2022 1.5T Classic Mini-Cooper: Powertrain: Equipped with a 1.5-liter turbocharged 3-cylinder B38A15A engine, paired with a 7-speed wet dual-clutch transmission. Body dimensions: The length, width, and height are 3832mm, 1727mm, and 1451mm respectively, with a wheelbase of 2495mm. Chassis: The drivetrain is front-engine, front-wheel drive, with a front MacPherson independent suspension and a rear multi-link independent suspension, featuring a unibody structure.
Was this review help?
12
1
Share
More Forum Discussions

What are the conditions for returning a car under the new three-guarantee regulations for automobiles?

The conditions for returning a car under the new three-guarantee regulations for automobiles are as follows: 1. Safety performance issues: If the vehicle has been repaired twice for serious safety performance failures, and the failures have not been resolved or new serious safety performance failures have occurred. 2. Engine issues: If the engine and transmission cannot function normally after being replaced twice, or if the same major component of the engine and transmission cannot function normally after being replaced twice due to quality issues, the replacement counts for the engine, transmission, and their major components should not be double-counted. 3. Body component issues: If the steering system, braking system, suspension system, front and rear axles, or the same major component of the body cannot function normally after being replaced twice due to quality issues.
8
5
Share

What speed can be achieved in 4th gear of a car?

In a car, 4th gear can achieve speeds above 40 km/h. Below is relevant information about car gears: 1. Speed range: First gear corresponds to speeds of 0-5 km/h, second gear to 5-20 km/h, third gear to 20-40 km/h, fourth gear to 40-60 km/h, and fifth gear to 60-100 km/h. 2. Gear shifting timing: For most cars, the optimal gear shifting occurs when the engine reaches 2000 r/min and should not exceed 2500 r/min. For some high-displacement, high-power engines, shifting can be done around 3000 r/min.
9
1
Share

Is the Buick Envision a Joint Venture Vehicle?

Buick Envision is a joint venture vehicle. Here are the specific details: 1. Introduction: The Buick Envision is a premium mid-size SUV launched by SAIC-GM. On December 18, 2018, SAIC-GM Buick announced the launch of the 2019 Buick Envision National VI version, equipped with a 2.0T SIDI direct-injection turbocharged engine + 9-speed HYDRA-MATIC intelligent transmission, fully compliant with the National VI emission standards. 2. Powertrain: The Envision Plus will be equipped with the familiar 2.0T turbocharged engine, capable of switching between two and four cylinders to achieve a balance between performance and economy. It also supports a 48V mild hybrid system, with a maximum power of 174kW and a peak torque of 350N·m. The transmission is matched with a 9AT gearbox.
11
5
Share

What Causes White Smoke from the Front Hood of a Car?

White smoke from the front hood of a car can be caused by the following reasons: 1. Engine overheating: After prolonged high-intensity use, the engine temperature may rise sharply, resulting in significant white smoke accompanied by a burning smell. 2. Radiator malfunction: If the car's radiator fails, the engine cannot dissipate heat effectively, leading to smoke emission. In such cases, it is advisable to consult a professional for radiator inspection and repair. 3. Oil leakage: Leaked engine oil can evaporate due to high temperatures, causing smoke and a burning odor. A comprehensive inspection is also necessary in this situation.
10
5
Share

What does repairing the front bumper frame of a car mean?

Repairing the front bumper frame of a car refers to the crash beam. Below are the relevant details:1. Crash Beam: The crash beam is a device designed to absorb collision energy and reduce impact during a vehicle collision. It consists of a main beam, an energy absorption box, and mounting plates that connect to the car. Both the main beam and the energy absorption box can effectively absorb collision energy during low-speed impacts, minimizing damage to the vehicle's longitudinal beams and thereby protecting the vehicle.2. Function: The crash beam is a structural beam set up to protect certain components from or minimize damage during collisions. Its primary purpose is to safeguard the protected components from harm rather than preventing the collision itself. Various vehicles are commonly equipped with crash beam structures to prevent significant impacts from external objects and ensure the safety of passengers inside the vehicle.
5
3
Share

Which mode is the most fuel-efficient for the Tiggo 8?

Tiggo 8's eco mode is the most fuel-efficient. Here is some relevant information about the Tiggo 8: 1. Body dimensions: The Chery Tiggo 8 is positioned as a mid-size SUV, with a length of 4700mm, width of 1860mm, height of 1746mm, and a wheelbase of 2710mm. 2. Exterior design: The Tiggo 8 follows Chery's family design language, but the overall styling is more bold and rugged. The honeycomb grille features a wing-shaped design that extends to both sides and connects with the headlight clusters. The LED daytime running lights are cleverly integrated into the air intakes on both sides, further highlighting the sporty and stylish appearance.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.