What model is the Cadillac that chased the high-speed rail?

1 Answers
DiAugust
07/30/25 12:15am
The Cadillac that chased the high-speed rail is the ATS-L, a B-segment sedan under the Cadillac brand. This model competes with sporty B-segment sedans like the BMW 3 Series. The Cadillac ATS-L has a length of 4,730 mm, a width of 1,824 mm, a height of 1,426 mm, and a wheelbase of 2,860 mm. Below is additional information: 1. Engine Specifications: This car is equipped with a 2.0-liter turbocharged engine, which delivers 279 horsepower and 400 Nm of maximum torque in its factory settings. The engine reaches its peak torque at 2,900 rpm and maintains it up to 4,600 rpm. The maximum power output is achieved at 5,500 rpm. 2. Suspension Design: The Cadillac features a double-ball-joint independent suspension at the front and a multi-link independent suspension at the rear. The double-ball-joint suspension is an improved version of the MacPherson strut, where the L-shaped control arm of the MacPherson strut is replaced with two separate links.
Was this review help?
7
1
Share
More Forum Discussions

What to Do If You Add 92 Gasoline After Adding 95?

Mixing 95 and 92 gasoline for a short period will not cause significant harm to the car, but long-term mixing can affect the lifespan of the car's ignition system, fuel injectors, and spark plugs, leading to an earlier need for major repairs. Below is a detailed analysis of 92 and 95 gasoline: 1. The octane ratings of 92 and 95 gasoline are different. If both types of fuel are added simultaneously, combustion in the vehicle's engine may not be as efficient as when using only one type, potentially leaving behind a large amount of combustion residues. 2. If a car is frequently fueled with a mix of 92 and 95 gasoline over time, the engine may accumulate significant carbon deposits, leading to reduced power, increased fuel consumption, and even affecting the engine's normal operation. 3. Occasionally mixing gasoline may not cause much harm. However, during the next refueling, it is necessary to drain the fuel tank and refill it with the correct gasoline grade as usual. But if mixing becomes a regular practice, the consequences could be severe. The vehicle may experience clogged fuel injectors, worsening carbon deposits, and abnormal fuel consumption.
14
5
Share

How to Operate the Windshield Wipers?

Windshield wipers are used to clear small amounts of water or debris from the front windshield. The operation method for car windshield wipers is as follows: 1. Locate the wiper switch. For most vehicles on the market, the wiper switch is positioned on the right-hand stalk behind the steering wheel, typically in the form of a lever. 2. Push the lever upwards, and the wipers will start working in a continuous mode. 3. Release the lever, and it will automatically return to its original position, stopping the wipers. Information about wiper icons is as follows: 1. OFF – The front wipers are in a stopped state. 2. INT – Automatic intermittent operation. Pull the lever down one notch, and the wipers will start working intermittently. This mode requires manual reset. 3. LO – Continuous operation. Pull the lever down another notch, and the wipers will operate continuously at an automatic rate. 4. HI – Continuous high-speed operation. Pull the lever all the way down, and the wipers will work at high speed.
14
3
Share

What is included in the crank connecting rod mechanism?

The crank connecting rod mechanism mainly includes the cylinder block, cylinder gasket, cylinder head, crankcase, cylinder liner, and oil pan of the engine block group; the piston, piston rings, piston pin, and connecting rod of the piston connecting rod group; and the crankshaft, flywheel, torsional vibration damper, and balance shaft of the crankshaft flywheel group. Here is some relevant information: 1. The engine block serves as the installation base for all mechanisms and systems of the engine. It houses all the main components and accessories of the engine, both internally and externally, and bears various loads. Therefore, the engine block must have sufficient strength and rigidity. 2. The working principle of the crank connecting rod mechanism: During the power stroke, the piston is subjected to the expansion pressure generated by the combustion gases, converting the linear motion of the piston into the rotational motion of the crankshaft via the connecting rod, thereby outputting power externally. Relying on the rotational inertia of the crankshaft and flywheel, the connecting rod drives the piston up and down to complete auxiliary strokes such as exhaust, intake, and compression, preparing for the next power stroke.
2
3
Share

Is the Subject 1 Mock Test the Same as the Real Exam?

There is little difference between the Subject 1 mock test and the actual exam; the 100 questions in the on-site Subject 1 exam are randomly selected from the question bank, and the Subject 1 mock test also draws from the mock question bank. Although the questions are not identical, the types are the same, with the same proportion of true/false questions and multiple-choice questions. Subject 1 Exam Content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; safe driving and civilized driving basics; basic knowledge related to motor vehicle driving operations. Subject 1 Exam Method: Computer-based test. Passing Score for Subject 1: The total time for the Subject 1 exam is 45 minutes. The test paper consists of 100 questions, including true/false and single-choice questions, with a full score of 100 points. A score of 90 or above is required to pass. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Norms".
17
1
Share

Where is the location for driver's license renewal?

The place for driver's license renewal is at the vehicle management office where the driver's license was originally issued. The driver should apply for renewal at the vehicle management office where the driver's license was issued within 90 days before the expiration date of the current license. When applying, the driver needs to fill out the 'Motor Vehicle Driver's License Application Form'. Documents required for renewal: Bring two copies of ID card, two recent 1-inch color photos without hats, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the vehicle management office). Renewal process: The driver should bring all required documents to the vehicle management office where the driver's license was issued to apply for renewal. The vehicle management office will process the renewal within one working day after verification. If the driver's license has expired for less than one year, it can be renewed normally; if it has expired for more than one year but less than three years, the license will be canceled, but it can be renewed by passing the subject one exam; if it has expired for more than three years, the license will be invalid and cannot be renewed.
19
1
Share

Can 92 Ethanol Gasoline and 92 Gasoline Be Mixed?

92 ethanol gasoline and 92 gasoline can be mixed. Here are the detailed explanations: 92 Ethanol Gasoline: 92 ethanol gasoline does not affect the driving performance of the car and also reduces the emission of harmful gases. As a new type of clean fuel, ethanol gasoline is currently the focus of renewable energy development in the world, in line with the national energy substitution strategy and the development direction of renewable energy. It is technically mature, safe, and reliable, fully applicable in the country, and has good economic and social benefits. Ethanol gasoline is a mixture rather than a new compound. Adding an appropriate amount of ethanol to gasoline as a vehicle fuel can save petroleum resources, reduce air pollution from vehicle exhaust, and also promote agricultural production. 92 Gasoline: 92 gasoline is gasoline with an octane number of 92, suitable for mid-range cars. Considering the current situation of the production, storage, transportation, and use of automotive gasoline products, as well as the demand for technological transformation of oil product manufacturers and vehicle emission control technology, the main indicators are equivalent to the current European standard levels, meeting the requirements of the domestic fifth-stage gasoline vehicle pollutant emission standards. It helps reduce vehicle pollutant emissions, which is of great significance for protecting the environment and improving air quality.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.