···
Log in / Register

What methods should be remembered when practicing reversing into the garage in Subject 2?

5 Answers
LaKayden
07/29/2025, 05:03 AM

When practicing reversing into the garage in Subject 2, the following methods should be remembered: 1. Practice driving straight: Before officially reversing into the garage, practice driving straight more often. When driving straight, keep the car body upright, and if necessary, get out of the car to check. 2. Find a good reference point: When the car body is upright, observe the surroundings to find a suitable reference point for yourself, and fix the upright state of the car body in your mind. Pay attention to keeping a broad field of vision and try to use distant reference points as much as possible. 3. Learn to use the rearview mirror and adjust the direction with the steering wheel: When entering the garage, observe through the rearview mirror whether the distance between the car body and the two sides of the garage is roughly equal, and ensure that the car body and the garage boundary line are parallel in the rearview mirror.

Was this review help?
4
5
Share
HeidiFitz
08/12/2025, 04:09 AM

When practicing the reverse parking in Subject 2, I’ve summarized key methods from coaching: First, memorize fixed reference points, like when the rearview mirror aligns with the corner line of the parking space, immediately turn the steering wheel—one and a half or two turns depending on the parking space type. Speed must be slow and steady, kept under 5 km/h, avoiding sudden acceleration to prevent the car from shaking. Steering wheel operation should be decisive—turn promptly and straighten accurately. Practice multiple times and seek the instructor’s guidance on common mistakes, such as turning too early and hitting the corner or turning too late and crossing the line. Remember to adjust mirrors for clear rear visibility—every mistake teaches something new, gradually building muscle memory. Stick to practicing a few rounds daily, stay calm and composed, and you’ll master it quickly.

Was this review help?
12
4
Share
Expand All
StFaith
10/05/2025, 11:24 PM

When I took the driving test for Subject 2 (reverse parking), I found the method quite simple: focus on memorizing the reference points like the corner of the garage, and turn the steering wheel when you see specific lines in the rearview mirror. Speed control is crucial—I always make sure to press the clutch steadily and not too abruptly. Don’t hesitate with the steering wheel; turn it as much as needed and return it accordingly. During practice, my common mistake was poor timing, which led to misalignment, but repeated practice helped me correct it. Remember to adjust the seat and mirrors before starting to ensure the right perspective. Having a partner observe and give advice is quite helpful, and practicing with mock tests helps build confidence. After a few tries, it becomes second nature—the key is to practice more and overthink less.

Was this review help?
16
4
Share
Expand All
JaxsonDella
11/18/2025, 11:50 PM

Mastering reverse parking relies on a few key points: remember reference points like aligning the mirrors before turning the steering wheel; keep the speed slow; steer accurately without rushing; practice multiple times to get the feel. Beginners often panic and cross lines, but patience leads to smoothness—safety first, no rush.

Was this review help?
19
5
Share
Expand All
JaxonMarie
01/09/2026, 01:28 AM

I share the method of reversing into the garage: remember the reference points accurately, such as aligning the rearview mirror with the garage edge line before turning the steering wheel; control the speed steadily without exceeding the limit; operate the steering wheel promptly; pay attention to the car's position feedback during practice, and start over if mistakes occur; also, adjust your mindset to stay calm, and ensure the mirrors are clear to help you see better; practice several times in neutral gear to understand the trick, and accumulate experience step by step to pass steadily.

Was this review help?
7
4
Share
Expand All
More Forum Discussions

Can National 5 Vehicles Be Registered?

National 5 vehicles can still be registered in regions or cities where the National 6 standard has not been implemented. However, in some areas or cities where the National 6 standard has already been implemented, National 5 vehicles cannot be registered. Below is relevant information about vehicle registration: 1. Before Registration: Registration first requires the vehicle's certificate of conformity. Keep the triplicate invoice for the vehicle purchase, then pay the vehicle purchase tax and obtain the main and auxiliary tax certificates before registering at the vehicle management office. 2. Selecting a License Plate After Approval: After the vehicle passes inspection, you can proceed to choose a license plate. 3. Regulations for Vehicle Registration: If you have obtained a motor vehicle but have not yet registered it and need to drive it temporarily within the administrative region, a temporary license plate valid for no more than 15 days will be issued.
10
2
Share

How to Repair a Broken Fender Liner?

When the fender liner is broken, it needs to be repaired at a professional repair shop, as car owners cannot fix it themselves. The fender, also known as the wing panel, is divided into front and rear fenders based on its installation position. Nowadays, some cars have fenders integrated into the body as a single unit during production. However, some cars have independently assembled fenders, especially the front fenders, as they are more prone to collisions and are easier to replace as a whole. Below are the steps to remove the fender liner: 1. First, use a jack to align with the support points under the car, then lift the chassis and remove the tire. 2. Next, remove the screws and clips securing the fender liner and take out the damaged fender. Of course, clean any mud or debris under the fender. 3. Finally, install the new fender by following the reverse steps of the removal process.
17
0
Share

Where is the Peugeot 508's Cabin Air Filter Located?

The Peugeot 508's cabin air filter is located above the accelerator pedal under the dashboard on the driver's side, hidden at the bottom of the center console. The steps to replace the air filter are: 1. Remove the cover plate in contact with the outside of the right foot; 2. Remove the cover plate below the steering wheel; 3. Open the side cover of the cabin air filter; 4. Take out the cabin air filter for replacement. The Peugeot 508 has a body length, width, and height of 4826mm, 1855mm, and 1465mm respectively, with a wheelbase of 2815mm. The Peugeot 508 is equipped with a 2.0L engine, which has a maximum power of 147PS and a maximum torque of 200Nm, paired with a 5-speed manual transmission.
4
1
Share

What is the part above the bumper called?

The part above the bumper is called the bumper tow hook cover. Opening this cover reveals the towing hook installation point of the vehicle. Below is an introduction about bumpers: 1. Function of the bumper: The bumper is a device designed to absorb and mitigate external impact forces during collisions, providing a cushioning effect to protect both the vehicle and its occupants. 2. Plastic bumpers: They are designed to harmonize with the vehicle's body shape and achieve lightweight construction. Plastic bumpers consist of three parts: the outer panel, buffer material, and crossbeam. 3. Role of plastic bumpers: Plastic bumpers offer strength, rigidity, and decorative appeal. From a safety perspective, they provide a cushioning effect during collisions, protecting the front and rear body of the vehicle. Aesthetically, they integrate seamlessly with the vehicle body, forming a unified appearance and serving as an important decorative component of the vehicle's exterior.
15
2
Share

How to Replace the Battery in a Cadillac Key Fob?

Steps to replace the battery in a Cadillac key fob: 1. Remove the mechanical key to reveal the seam on the plastic casing; 2. Use a tool to gently pry along the edge until the gap is wide enough to open the key cover; 3. Note the orientation of the battery's positive and negative terminals and remember it, then remove the old battery and replace it; 4. Close the key cover, ensuring proper alignment to avoid damaging the internal circuitry during reassembly. Below is some related information about Cadillac: 1. Cadillac is a mid-to-large-size sedan with dimensions of 5103 mm in length, 1852 mm in width, and 1502 mm in height, and a wheelbase of 2837 mm. 2. Cadillac is equipped with a turbocharged engine that delivers a maximum power output of 198 kW, a maximum torque of 353 Nm, and a maximum horsepower of 269.
11
2
Share

What Causes the Slight Fluctuation of the Needle During Car Idling?

The slight fluctuation of the needle during car idling is caused by: 1. Oil stains or carbon deposits on the throttle valve, oil stains or carbon deposits around the intake tract of the throttle valve, oil stains or carbon deposits on the idle stepper motor, duty cycle solenoid valve, or rotary solenoid valve; 2. Damage or sticking of the throttle valve motor, idle stepper motor, duty cycle solenoid valve, or rotary solenoid valve; 3. Faults in the air flow meter or its circuit, faults in the intake pressure sensor or its circuit, poor contact due to water ingress in the engine control unit connector, or internal faults in the computer. The solution to the slight fluctuation of the needle during car idling is to clean the intake pipe and fuel injector to ensure smooth fuel injection, thorough engine combustion, and stable operation.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.