What materials are required for vehicle inspection in Beijing?

1 Answers
VonPatrick
07/29/25 9:36pm
When undergoing vehicle inspection in Beijing, you need to bring the original vehicle registration certificate, the original ID card of the person conducting the inspection, and the original valid insurance policy. Below is a detailed introduction to vehicle annual inspection: 1. Meaning and purpose: Vehicle annual inspection refers to the annual inspection of vehicles that have already obtained official license plates and registration certificates, conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." The purpose is to examine the main technical conditions of the vehicle, urge the strengthening of vehicle maintenance, keep the vehicle in good condition, and ensure driving safety. 2. Principle of proximity for vehicles: For vehicle annual inspection, you only need to go to the vehicle management office or the vehicle inspection stations designated by the vehicle management office. You can choose the nearest location by checking online. Starting from September 2018, vehicles can be inspected nationwide. Small cars, trucks, and medium-sized buses can be directly inspected in provinces other than the registration location, and the inspection compliance mark can be applied for.
Was this review help?
8
4
Share
More Forum Discussions

What are the steps to clear the INSPEC on a Passat?

Here is the introduction to the method for clearing the INSPEC on a Passat: 1. Select the settings in the menu, then choose the maintenance option in the menu, and press the reset button directly to clear it. 2. Alternatively, with the ignition switch off, press the SET button on the right side of the instrument panel, then turn on the ignition switch, release the SET button, and press the button on the right side of the instrument panel again. This will also clear the indicator. Additional information: 1. When the INSPEC appears in Volkswagen series models, it is a reminder to the owner that maintenance is due. This is Volkswagen's maintenance reminder function, which is common in many vehicles and is very useful for forgetful owners. 2. When the maintenance reminder appears, owners should proceed with maintenance. Car maintenance is actually quite simple; it involves replacing certain fluids and wear-and-tear parts. Wear-and-tear parts in a car include belts, spark plugs, tires, brake pads, brake discs, batteries, wipers, and various filters. Fluids in a car include transmission oil, coolant, power steering fluid, and brake fluid.
6
0
Share

Why does Audi indicate that the auto start-stop is unavailable?

Start-stop system failure is not necessarily a fault of the auto start-stop system itself; it could be due to issues with the braking system or air conditioning system, among others. A specific repair plan can only be provided after a comprehensive analysis using a diagnostic tool to read fault codes and data streams in conjunction with the fault symptoms. Generally, faults in the auto start-stop system do not affect the normal driving of the vehicle. Below is an introduction to relevant information: 1. The function of the auto start-stop device is typically controlled by the engine management system. This device can be installed in both manual and automatic transmissions. During the engine shutdown process, when the vehicle encounters congestion or a red light, the driver presses the brake until the vehicle stops and keeps the brake pressed without releasing it. 2. In addition to operating the clutch, shifting gears, and braking according to conditions, the driver must also meet several other requirements, such as the engine speed being below 1200r/min, coolant temperature between 25°C and 100°C, brake vacuum above 550mbar, battery temperature greater than or equal to -1°C but less than 55°C, and the difference between the set air conditioning temperature and the actual air outlet temperature being below 8°C.
12
3
Share

What series is the Crown car?

Crown is a mid-to-large size car brand under the Toyota Group. It is a Japanese car. Crown engine performance: The domestic Crown engines come in three types: 2.5L, 3.0L, and 4.3L. The first two are both V6-cylinder 24-valve designs, while the 4.3L engine is a V8. They are equipped with the Dual VVT-i system (Dual Variable Valve Timing-intelligent), which significantly improves the engine's intake efficiency, fuel economy, and power performance, delivering stronger horsepower. In terms of the chassis, it features a four-wheel independent suspension system, providing excellent comfort. Crown body advantages: In terms of active safety, the new Crown adopts advanced braking technology and various excellent driving assistance equipment, including the TRC traction control system, VSC vehicle stability control system, and VDIM vehicle dynamics integrated management system. These ensure optimal traction under various road conditions, achieving outstanding handling effectiveness.
14
4
Share

What Causes the Abnormal Noise When Turning the Steering Wheel in Place?

Reasons for abnormal noise when turning the steering wheel in place: It might be the sound of the horn wire transmission spring steel plate rubbing against the steering wheel. It is recommended to apply some lubricating oil at the friction point between the spring steel plate and the steering wheel. If the noise is a slight friction sound between the tires and the ground, it is normal. However, any unusual noise is not normal. Below are specific explanations regarding the causes of abnormal noise: 1. The noise when turning the steering wheel in place is likely the sound of the horn wire transmission spring steel plate rubbing against the steering wheel. Usually, the noise comes from inside the car and is a rustling metal friction sound. The solution is to apply some lubricating oil at the friction point between the spring steel plate and the steering wheel. 2. If the noise occurs while driving, it usually comes from the front suspension outside the car. If it is a sharp squeaking sound, it might be due to excessive or insufficient front wheel toe-in, causing tire friction when turning the wheels non-parallel. If the sound is a 'clicking' noise, it indicates excessive wear of the car's half-shaft CV joint, suggesting it needs replacement. Typically, noise when turning left indicates damage to the right-side CV joint.
10
3
Share

Is 5W-30 Fully Synthetic?

5W-30 is not necessarily fully synthetic; it depends on whether the oil container is labeled as fully synthetic. 1. The oil model number only indicates the viscosity and low-temperature flow performance of the oil, not whether it is fully synthetic. 2. There are three types of engine oil: mineral oil, semi-synthetic oil, and fully synthetic oil. Below are the relevant introductions to these three types of oil: 1. The base oil of mineral engine oil is refined from petroleum. The molecular size and shape of this type of engine oil are mostly irregular, so its lubricating performance is generally average, and its service life is relatively short. 2. The base oil of fully synthetic engine oil is artificially synthesized. The molecular size and shape of this type of engine oil are almost uniform, so its lubricating performance is quite good, and its service life is relatively long. 3. The lubricating performance and service life of semi-synthetic engine oil fall between those of fully synthetic engine oil and mineral engine oil. 4. Engine oil consists of base oil and additives. Additives can enhance the performance of the engine oil. Common engine oil additives include antioxidants, dispersants, etc.
3
5
Share

What is the fuel tank capacity of the Baojun 730 in liters?

The fuel tank capacity of the Baojun 730 is 52 liters, as officially announced. Owners who have purchased the Baojun 730 can also check this information on the vehicle's configuration sheet. The Baojun 730 uses 92-octane fuel, with a fuel consumption of 6.8 to 7.6L per 100 kilometers. A full tank can cover a distance of approximately 684 to 765 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. In actual refueling situations, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount added may exceed the marked capacity.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.