···
Log in / Register

What materials are required for changing driver's license information?

4 Answers
SanLilah
09/06/25 4:09am
To change personal information on a driver's license, you need to file a record at the vehicle management office. Below is an introduction to changing driver's license information: 1. Preparation materials: (1) Original copy of the "Motor Vehicle Driver's License Application Form"; (2) Original and photocopy of the motor vehicle driver's identity proof (a valid residence permit and photocopy are required if not in the registered residence area); (3) Original copy of the motor vehicle driver's license; (4) In case of changes to the driver's name or "Resident ID Card" number, the resident household register and relevant proof issued by the local public security authority are also required (needed when changing the license due to identity information changes); (5) Three recent half-length, bareheaded, front-facing white-background color ID photos. 2. Processing period: If compliant, the motor vehicle driver's license will be reissued within one day.
Was this review help?
13
0
Share
VanCharlotte
09/18/25 4:06am
Last time I went to the DMV to change my driver's license address, I brought the original and photocopy of my ID card, the original driver's license, and proof of the new address from my household registration. They also required two 2-inch white background ID photos. If changing your name, you'd need to bring additional documents like a marriage certificate or name change certificate. When filling out the application form, be careful to double-check the information to avoid mistakes. I recommend calling the local DMV in advance to confirm details, as requirements may vary slightly by region. For example, big cities now support mobile appointments, saving queuing time. The whole process takes about half an hour, but incomplete documentation can cause delays - remember to bring everything to get it done in one go.
Was this review help?
14
1
Share
Expand All
McAdaline
11/01/25 4:33am
As a seasoned driver, I know that changes to driver's license information must be handled with care. Required materials include ID card, original driver's license, and proof of the specific change, such as property deed or rental contract for address changes, or name change documents issued by the public security bureau for name changes. You should also prepare several two-inch photos. These requirements are in place to ensure the authenticity of the information and prevent illegal activities. I recommend making copies of all materials in advance to avoid wasting time queuing on-site. Also, check the validity of your driver's license—if it's expired, you'll need to renew it first. After the changes, notify your insurance company immediately to avoid issues with premiums.
Was this review help?
19
5
Share
Expand All
SanAmir
12/15/25 4:42am
After my divorce this year, I needed to change the name on my driver's license. I brought my ID card, original license, divorce certificate, and two photos, and got it done at the DMV. They had me fill out a form to confirm the details. The whole process went smoothly without much waiting, just make sure the photo size is correct. After the change, the vehicle registration also needs to be updated to avoid trouble during inspections. I think the list of required documents is short, but don't forget to bring the originals.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What are the steps to start an automatic transmission vehicle?

Automatic transmission vehicle starting steps are as follows: 1. Insert the key and turn it to the second ignition position (power mode), wait for the system self-check to complete; 2. Shift the gear lever from P to N; 3. Release the brake and start the engine; 4. Press the brake pedal with your foot, shift the gear lever from N to D, then release the brake and press the accelerator to start moving. Automatic transmission driving tips include: 1. Accelerate gently when starting, always start in P or N gear, never coast in neutral; 2. Shift to N gear when waiting at traffic lights or during brief stops, use P gear when parking; 3. Never shift to P gear while the vehicle is moving; 4. Ensure the vehicle comes to a complete stop before shifting to R gear for reversing.
19
0
Share

How Often Should the Brake Pads on a Chevrolet Cruze Be Replaced?

Chevrolet Cruze brake pads should generally be replaced every 20,000 kilometers or so. The replacement interval for brake pads and discs is not fixed and depends on the following factors: 1. Road conditions the vehicle is driven on. 2. Frequency of the driver pressing the brake pedal. 3. Braking force applied. Additionally, owners can decide when to replace the brake pads based on their wear level. For example: 1. The normal thickness of brake pads is about 13mm, which gradually wears down with use. When the thickness of the brake pads falls below 4.3mm, they should be replaced. Otherwise, it can pose a serious safety risk to the vehicle. 2. Typically, there is a small protrusion at both ends of the brake pads. Once these protrusions wear down to be level with the pad surface, replacement is necessary.
11
4
Share

What is the history of Subaru STI?

Subaru STI's history originated in 1972 when Subaru participated in a rally race in southern Australia using the Leone model. Brief history of Subaru STI: In 1972, Subaru used the Leone model (also the predecessor of the Impreza) to compete in a rally race in southern Australia, marking the legendary journey of the brand's first four-wheel-drive vehicle. In 1980, Subaru began competing in the Safari Rally in East Africa using the Leone four-wheel-drive model. As for the renowned WRC, it wasn't until 1990 when Subaru collaborated with the British company Prodrive to successfully participate in the Group A competitions of the WRC. Subaru establishes its official motorsport division: It wasn't until April 2, 1988, that Subaru established an independent motorsport division called Subaru-Tecnica-International (Subaru International Technical Department), which is STI. The STI logo uses pink, known as Sakura Pink, a color that symbolizes masculinity in Japanese culture.
11
3
Share

Can the car still be driven when it overheats?

When the car overheats, it should not be driven. The vehicle should be turned off immediately to prevent further damage and avoid issues such as hose bursts or engine damage. If the temperature gauge lights up, it indicates that the engine coolant temperature is too high, warning the owner of potential engine damage. In this case, the vehicle should be pulled over as soon as possible, and the engine should be shut off. Do not attempt to restart the vehicle. Causes of engine overheating: 1. Insufficient coolant in the engine: Leaks in the engine cooling system can lead to a lack of coolant, causing the engine temperature to rise. 2. Thermostat failure: If the thermostat becomes stuck and fails to open the main cooling circuit in time, it can trigger the temperature warning. 3. Water pump damage or belt breakage: The water pump is responsible for circulating coolant into the radiator. If the water pump fails or the belt driving it breaks, coolant cannot flow into the radiator for cooling, resulting in excessively high engine temperature.
7
1
Share

What is the reason why the reversing radar of Jetta VS5 does not display the distance?

Damage to the radar power line or failure of the radar probe circuit. Reversing Radar: The reversing radar is an anti-collision radar for reversing, also called a parking assist device. It mainly consists of ultrasonic sensors, controllers, displays, etc. It is a safety auxiliary device when the car is parked or reversing. It can inform the driver of the surrounding obstacles through sound or more intuitive display, relieving the troubles caused by the driver's looking around when parking, reversing, and starting the vehicle, and helping the driver eliminate blind spots and blurred vision defects. Working Principle of Reversing Radar: Based on the principle of animal bionics, it informs the driver of the surrounding obstacles through sound or more intuitive display, relieving the troubles caused by the driver's looking around when parking, reversing, and starting the vehicle, and helping the driver eliminate blind spots and blurred vision defects, thereby improving driving safety.
20
3
Share

How to Operate When Parking a Manual Transmission Car?

Manual transmission parking steps are: 1. First press the brake, when the speed decreases to near stop, then press the clutch, and then press the brake firmly to stop the vehicle; 2. After the vehicle is completely stopped, shift the gear to 1st gear; 3. Pull up the handbrake; 4. Turn the key to turn off the engine; 5. Release the clutch and foot brake; 6. Unfasten the seat belt and exit the vehicle. When driving a manual transmission car, if the speed is high, you cannot directly press the clutch pedal, as this is very dangerous. First press the brake pedal to slow down, and only when the speed has decreased can you press the clutch pedal. When parking on flat ground, you can choose to shift to neutral, but on a slope, you must shift to 1st gear. Before starting next time, first press the clutch, shift from 1st gear to neutral, and after starting the vehicle, shift to the starting gear to avoid bouncing.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.