···
Log in / Register

What materials are needed to take the driver's license test in another location?

4 Answers
Aaron
07/29/25 9:28pm
You need to prepare the following materials: 1. ID card and copies (about 8 copies); 2. Six one-inch photos (passport-style photos with white background, bareheaded, and showing ears); 3. Students need to bring their student ID; 4. Temporary residence permit. The driver's license test is an examination to obtain a motor vehicle driver's license. The content and passing standards of the test subjects are uniformly set nationwide. The test is divided into three subjects and four examinations: theoretical knowledge, field driving skills, road driving skills, and safe and civilized driving knowledge. Below is a related introduction: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test. The structure and basic question types of the test question bank are formulated by the Ministry of Public Security, and provincial-level traffic management departments of public security organs establish the test question bank for their respective provinces (autonomous regions, municipalities) based on local conditions. 2. Subject 2: Field driving skills test, including: reversing into a parking space, stopping and starting on a slope, turning at a right angle, driving on a curve, and parallel parking. 3. Subject 3: Road driving skills test, including basic items: preparing to drive, starting, driving straight, changing lanes, passing intersections, pulling over, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. 4. Subject 4: Safe and civilized driving knowledge, test items: knowledge related to safe and civilized driving.
Was this review help?
3
4
Share
LeJack
08/15/25 8:21pm
I just moved from my hometown to another city for work and decided to get my driver's license. When preparing the materials, I found that several things were required: First, I needed to bring my original ID card and two copies of it, which are the basic documents. Second, I had to obtain a temporary residence permit locally. I went to the local police station to register my residence information and got it, while some friends also used work certificates to assist their applications. The medical examination report is crucial—I went to a designated hospital for a simple check-up, including a vision test and a stamped health form. Additionally, I brought a few one-inch white-background photos for the application form when registering. I also recommend checking the specific address and office hours of the registration point in advance to avoid a wasted trip. In terms of fees, the temporary residence permit might be free or cost a few yuan for processing, the medical examination costs around 50 yuan, and the total exam registration fee is about 200-300 yuan. The entire process takes about a week to prepare, and remember to arrive early to queue up and save time.
Was this review help?
11
2
Share
Expand All
SanLilliana
10/17/25 4:01am
My child went to another city for an internship after graduating from college this year and wants to get a driver's license there for convenience. As parents helping to prepare the materials, we need to gather these items: two copies of the original ID card and two photocopies, which the child should bring along for the process. A temporary residence permit is mandatory, and a letter of proof from the internship employer can help simplify the procedure. The medical checkup, including a vision test, must be completed at a local hospital to obtain a qualification certificate. Prepare six one-inch white-background standard photos for forms at the test center. The application form can be obtained and filled out on-site. I also reminded my child to book an appointment two days in advance to avoid peak times and to practice the test route a few times before the exam. The fees are not high, but it's best to prepare some extra cash just in case. Gathering these materials isn't difficult, but with tight timing, it's best to arrange everything a week in advance.
Was this review help?
20
0
Share
Expand All
SamuelAnn
11/30/25 4:44am
After retirement, I stayed in the provincial capital for a while and planned to get a driver's license for a self-driving trip. The materials needed for taking the test in another city are just these: Bring two copies of your ID card to the registration point for identity verification first. Obtain a local temporary residence registration card—you need to apply for a residence permit in advance, and the procedure is straightforward. Then, get a medical examination form from a nearby clinic to check your vision and physical condition, and sign to confirm if everything is fine. Prepare several one-inch color photos for the application form and file. Fill out the application form with your personal details, and that's it. The whole process isn't difficult; the main time is spent on the road, taking buses back and forth for half a day. The cost is a few dozen yuan, including the medical exam and document fees. Go early to avoid crowds, and everything will go smoothly.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

Which country does GAC FCA belong to?

GAC FCA is not an automobile brand, but a Chinese company, whose full name is GAC Fiat Chrysler Automobiles Co., Ltd. It is a company jointly established by Guangzhou Automobile Group and Fiat Chrysler Automobiles Group. The following is the relevant introduction of GAC FCA: 1. GAC Fiat Chrysler Automobiles Co., Ltd. was established on March 9, 2010, jointly invested and constructed by Guangzhou Automobile Group Co., Ltd. and Fiat Chrysler Automobiles Group with a 50:50 share ratio. 2. GAC Fiat mainly produces Jeep and Fiat models. Among them, Jeep is a brand from the United States, while Fiat is an Italian brand. Fiat Chrysler Automobiles Group is an Italian company, which owns brands such as Dodge, Ferrari, Maserati, Alfa Romeo, and Jeep.
16
0
Share

What does the yellow exclamation mark on the Honda XR-V dashboard mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many dashboard indicator lights with exclamation marks, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed introduction to the exclamation mark fault lights: General faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Main issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake system fault: A circle with an exclamation mark inside parentheses. This represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal tire pressure: A horizontal line with an exclamation mark inside parentheses. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the car lights. Solution: Go to a 4S shop for inspection as soon as possible, or check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the problem. In addition, during daily use of the vehicle, the fault lights displayed on the vehicle dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the corresponding repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and call for professional help to prevent unpredictable dangers to the vehicle and personal safety caused by forced driving. It should be noted that when the car is started, all lights will turn on, and the system will perform an automatic check. After the check is completed, the lights will turn off automatically. If a light does not turn on when the ignition is turned on, remains on without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for car inspection to eliminate potential safety hazards.
3
0
Share

How to Install Door Edge Guards?

First, clean the door surface. Then peel off a small section of the edge guard and insert it into the door edge. While pressing it down, continue peeling off the backing tape. Finally, trim off any excess material. Before installation, use a clean towel to wipe the mounting area. Peel back a portion of the adhesive backing tape inside the edge guard and carefully insert the guard into the door edge or other installation position. As you press the guard into place, gradually remove the remaining double-sided tape backing. Align with the door edge and cut off any extra length. Below is relevant information about door edge guards: 1. Door edge guards, also known as protective strips, anti-scratch trims, bumper guards, or side moldings. Installing them effectively prevents paint scratches on door panels when opening doors and avoids damaging other vehicles' paint when parked too closely. 2. There are three structural attachment methods for edge guards: Recessed type - where the vehicle body has pre-formed grooves during manufacturing for guard insertion. Surface-mounted type - where the vehicle body remains flat with pre-drilled holes for guard pegs to insert and adhere. Fixed type - where guards are secured to the vehicle body using nuts and bolts.
19
3
Share

How Many Types of Lights Does a Sedan Have?

Automotive lighting mainly includes headlights (comprising high beam and low beam), front position lights, rear position lights, license plate lights, instrument panel lights, turn signals, brake lights, hazard warning flashers, reverse lights, and front fog lights. Below are the relevant introductions: 1. The front-end headlights are divided into low beam and high beam. High beam is used in situations with very poor lighting and no auxiliary light sources, while low beam is used during relatively bright nights. 2. Fog lights are used when road conditions are not very clear, such as during foggy weather when visibility is poor. These lights are located at both the front and rear of the vehicle, with only one on each side, asymmetrical, and differentiated from other lights of the same color. 3. Brake lights illuminate when braking and are typically installed at the rear end of the vehicle, in a conspicuous red color. Additionally, there are reverse lights, which are positioned at the rear end of the vehicle, on either side of the trunk. The two types of lights differ in color, with reverse lights being white.
15
4
Share

How to Activate OnStar for a New Car?

The method to activate OnStar for a new car is as follows: After getting into the car, press the blue OnStar button in the middle of the rearview mirror twice to directly connect to the OnStar service center. Inform the customer service representative that you have just purchased a car equipped with OnStar and wish to activate it. Then, follow their instructions step by step to set up a password and identity information. Below is an introduction to OnStar's related features: 1. Automatic Collision Assistance. When the built-in collision sensors in the vehicle detect a collision or airbag deployment, they automatically send an alert to the command center. A professional advisor will then contact the vehicle via voice communication. 2. Automatic Assistance for Airbag Deployment. Once the airbags are deployed, OnStar will receive the information and contact the vehicle owner. 3. Medical Emergency Assistance.
17
1
Share

Where is the handbrake on Honda Jade

Honda Jade uses a foot-operated parking brake. The brake pedal is located next to the left foot, smaller than the main brake pedal. Pressing it all the way down is equivalent to pulling the handbrake, and pressing it again releases the handbrake. Here is some related information: 1. When JADE (Jade) was first launched in September 2013, it immediately attracted the attention of many urban young people and quickly became a best-selling model. The most striking features of JADE (Jade) are its stylish appearance and spacious interior. 2. Like other Honda models, JADE (Jade) has a relatively short engine compartment, but this does not affect the vehicle's ability to withstand frontal collisions. After the C-NCAP 64km/h frontal 40% offset collision test, the passenger compartment structure of JADE (Jade) remained very intact, with no significant deformation in key areas such as the A-pillar and B-pillar. The intrusion deformation of the steering column and pedals was also well controlled.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.