What materials are needed to apply for a Beijing Entry Permit?

1 Answers
ArabellaLee
07/29/25 4:44pm
Materials required for on-site application of a Beijing Entry Permit are as follows: 1. Driver's ID card. 2. Valid motor vehicle driver's license. 3. Motor vehicle registration certificate. 4. Valid compulsory traffic accident liability insurance certificate for motor vehicles. 5. Valid motor vehicle safety technical inspection compliance mark. 6. Certificate confirming the vehicle meets environmental protection requirements as verified by the local environmental protection authority. Below is relevant information: 1. There are two ways to apply for a Beijing Entry Permit: Method 1: Apply via mobile app. Method 2: On-site application. 2. Validity period: Starting from November 1, 2019, each vehicle can apply for a Beijing Entry Permit up to 12 times per year, with each permit valid for a maximum of 7 days.
Was this review help?
9
1
Share
More Forum Discussions

Does the Kia K3 come with a sunroof?

The base model of the Kia K3 does not have a sunroof; only the mid and high-end models are equipped with one. The car sunroof is installed on the roof, effectively facilitating air circulation inside the vehicle, increasing the intake of fresh air, and achieving the purpose of ventilation. During the rainy and humid seasons of summer and autumn, drivers only need to open the sunroof to the rear-tilt ventilation position to easily eliminate fog on the windshield, ensuring driving safety. Here are some related details: 1. The Kia K3 is a compact car under Dongfeng Yueda Kia, with dimensions of 4600mm in length, 1780mm in width, 1445mm in height, and a wheelbase of 2700mm. 2. The Kia K3 is equipped with intelligent driving systems such as FCA (Forward Collision-Avoidance Assist), LDW (Lane Departure Warning), LKA (Lane Keeping Assist), DAW (Driver Attention Warning), HBA (High Beam Assist), and BCW (Blind Spot Collision Warning).
4
4
Share

What Are the Symptoms of Low Transmission Fluid?

The symptoms of low transmission fluid include: reduced lubrication effectiveness, decreased cooling performance, and lower transmission efficiency. Detailed explanations of the symptoms of low transmission fluid are as follows: 1. With insufficient transmission fluid, lubrication effectiveness decreases, leading to abnormal noises in the transmission, difficulty in gear shifting, accelerated wear of components, and increased susceptibility to damage. 2. Low transmission fluid results in reduced cooling performance, causing the internal temperature of the transmission to rise. In severe cases, this can burn out internal transmission components, rendering the transmission unusable. 3. Insufficient transmission fluid lowers transmission efficiency, causing sluggish gear shifts, slower vehicle acceleration, weak starts, and increased fuel consumption.
15
4
Share

What is the battery model for the Audi A3 car key?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F replacing it if it is square; 20 indicates that the battery has a diameter of 20mm; 32 represents a battery height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is not high or quality control is poor, its lifespan can be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. If the usage environment is ideal (sealed, room temperature, free from moisture and other interferences), its lifespan can be further extended to 8 years or even 10 years. The usage time of a vehicle remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter its lifespan will be. If the remote key battery runs out of power, the mechanical key can be used directly to open the vehicle. Car remote keys use button batteries, mainly three types: CR2016, CR2025, and CR2032. For the specific model used in each case, car owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: The usage rate of car key remotes is very high, making it one of the most common remote batteries. The voltage of this battery is 3V, while most car key batteries are powered by 9V, so three batteries need to be replaced each time. Examples include Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter 20mm, thickness 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016. However, some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter 20mm, thickness 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is lithium metal, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are ethylene glycol dimethyl ether, propylene carbonate, and lithium perchlorate. It is shaped like a button, hence the name button lithium battery or lithium-manganese button battery.
6
4
Share

What is the emission standard of the Volvo XC60?

Volvo XC60 is a China VI emission standard model. Below are the relevant details: 1. The Volvo XC60 is a mid-size SUV launched by Volvo Cars. 2. In terms of powertrain, this model offers two variants, namely the T4 and T5 versions, both equipped with a 2.0T high/low-power turbocharged engine. 3. The 2.0T low-power engine delivers a maximum power of 140kW and a peak torque of 300Nm, while the 2.0T high-power engine produces a maximum power of 187kW and a peak torque of 350Nm. The transmission system is paired with an 8-speed automatic transmission. 4. Notably, the engine in this model features a compact design, allowing it to be positioned closer to the front suspension, which enhances the vehicle's handling performance to some extent.
11
4
Share

Is the Audi S5 a convertible?

The Audi S5 3.0T Cabriolet is the convertible version. Here are some details about the Audi S5: 1. The Audi S5 is a sporty high-performance coupe produced by Audi. The currently available Audi S5 models in the market come in four-door, two-door, and convertible versions. 2. In terms of power: The Audi S5 is equipped with a 3.0-liter 6-cylinder turbocharged engine, delivering a maximum horsepower of 354, a maximum power of 260 kW, and a maximum torque of 500 N·m. 3. In terms of transmission: The Audi S5 uses an 8-speed dual-clutch transmission. 4. In terms of drivetrain: The Audi S5 employs a four-wheel-drive system. 5. In terms of suspension: Both the front and rear suspensions of the Audi S5 are five-link independent suspensions.
2
4
Share

What is the fuel tank capacity of the Polo car?

The fuel tank capacity of the Volkswagen Polo is 42.5L. The manufacturer recommends using 92-octane gasoline. Volkswagen Polo refueling process: 1. First, press the left side of the fuel tank cap to open it. 2. Unscrew the fuel tank sealing cap. 3. Insert the fuel tank sealing cap from above into the open fuel tank cap. 4. Insert the filling nozzle into the fuel filler neck until it reaches the limit position. 5. Note that when the filling nozzle is cut off for the first time, it indicates that the tank is full. It is recommended to stop refueling to prevent fuel overflow. 6. After refueling, do not pull out the nozzle immediately. Wait for 5 seconds at the fuel filler neck to prevent minor fuel leakage. 7. Tighten the fuel tank sealing cap until you hear a click. 8. Close the fuel tank cap tightly until you hear a "click" sound.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.