···
Log in / Register

What materials are needed for vehicle annual inspection by proxy?

4 Answers
Finn
07/29/25 1:40pm

Materials required for vehicle annual inspection by proxy are as follows: 1. Owner-related materials: Submit the agent's identity proof (if the agent is an organization, the handler's identity proof is also required), and a written authorization from the vehicle owner. 2. Vehicle-related materials: Vehicle registration certificate, compulsory traffic accident liability insurance certificate, vehicle safety technical inspection certificate issued by an authorized inspection agency (except for exempted vehicles), and vehicle and vessel tax payment or exemption certificate. Note: If the information on the vehicle license plate number, registration certificate, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption certificate, and vehicle safety technical inspection certificate does not match, the vehicle inspection compliance mark will not be issued.

Was this review help?
14
0
Share
SanChase
08/14/25 4:44am

I've handled the vehicle annual inspection by myself several times. Preparing the materials isn't overly complicated but must be complete. The core requirements are the original and photocopy of the vehicle license to verify vehicle information, a copy of the owner's ID card to confirm identity, a properly signed power of attorney to ensure authorization, and a duplicate of the compulsory traffic insurance policy to prove valid coverage. The agent must also bring their original ID card. Last time I forgot the power of attorney and wasted half a day making a fruitless trip, so I recommend checking all items a day in advance. Proxy services are indeed convenient and time-saving, especially for frequent travelers like me, allowing quick processing of the inspection to avoid long queues. Safety inspections are crucial—regular checks keep the vehicle reliable and give peace of mind on the road. The materials are simple but require careful preparation; daily car maintenance tips can minimize hassles.

Was this review help?
9
5
Share
Expand All
DeValentina
10/10/25 4:38am

I just completed the vehicle annual inspection through an agency recently. The document checklist is quite simple: the original vehicle registration certificate, a copy of the owner's ID card, a signed power of attorney, and a duplicate copy of the compulsory traffic insurance policy must be brought. The agent should not forget their own ID card. In actual practice, all documents are indispensable. Like last time when I forgot the duplicate insurance policy, the reapplication process wasted time and affected my work schedule. Using an agency service is worry-free and efficient, suitable for the fast-paced lifestyle of young people, freeing up time for other tasks. Check the vehicle management office's detailed requirements in advance to avoid oversights. A safety inspection ensures good vehicle condition, making driving much more reassuring. With all documents prepared, it's easy to get it done smoothly - a little life hack that saves energy.

Was this review help?
4
3
Share
Expand All
DeMaya
11/23/25 5:49am

The basic materials required for proxy vehicle annual inspection are the original vehicle license, a copy of the owner's ID card, a completed and signed power of attorney, and a duplicate of the compulsory traffic insurance policy. The proxy only needs to bring their own ID card to handle the procedures. Having all materials ready is a crucial step, as missing any item may delay the process. The power of attorney should be printed or handwritten clearly in advance, specifying all necessary details. Proxy services can help vehicle owners save time and efficiently complete the annual inspection. For safety reasons, vehicles must be regularly inspected to ensure there are no hidden dangers on the road. It is recommended to verify all documents before proceeding with the proxy service to prevent errors.

Was this review help?
20
2
Share
Expand All
More Forum Discussions

How to solve the problem of BMW X1 air conditioner not cooling?

First, drive with the windows open for a while to equalize the indoor and outdoor temperatures, then close the windows, turn on the air conditioner's internal circulation mode, and set it to the coldest mode with the highest fan speed. If the car air conditioner can still cool, go to a 4S shop to check if there is a lack of refrigerant (Freon). If it is lacking, Freon can be added. It is best to replace the air filter during seasonal changes and perform a cleaning of the air conditioning ducts. For air conditioning circuit issues, check whether the AC switch on the control panel is malfunctioning, whether the main unit's temperature control circuit is normal, and whether the compressor's electromagnetic coil is engaging properly.
16
5
Share

How to Match the Remote Key for Besturn B70?

Park the car and ensure all four doors are closed. Then, open and close the left front door (the main driver's side door) three times. Within three seconds, insert the key and turn it on and off five times consecutively (without starting the engine). Remove the key and press the unlock and lock buttons on the remote. You should hear a response from the remote. After the remote responds, press the unlock and lock buttons on the new remote. The car may experience remote control confusion at this point, requiring a re-matching process. Ensure all four doors are locked, insert the key, and turn it on and off five times within five seconds. Remove the key and press the unlock and lock buttons on the remote twice to complete the process.
18
2
Share

How to Reset the Maintenance Wrench Light on Buick Encore?

Turn off the ignition switch to cut off the power supply to the car. Press and hold the buttons on the dashboard simultaneously, keeping both trip reset buttons pressed for more than 5 seconds. Turn the key to the second position (accessory mode) without starting the engine, and wait until all dashboard lights illuminate. This process typically takes about 10 seconds. Wait for the wrench light to go off. Once it's off, release both trip reset buttons. Turn off the ignition switch and then turn it back on to complete the maintenance reset.
17
1
Share

How to Fix Abnormal Power Window Operation in Honda Vezel?

Open the door where the switch needs to be replaced. For most models, the power window switch area is made of plastic. Carefully examine the seam between the trim panel and door panel to locate the notch. Insert a pry tool or flat tool into the notch to lift the trim panel, then slowly remove the panel along the gap. Disconnect the power window switch connector. Flip the trim panel over, and you should see the switch secured by several cross-head screws. Remove these screws to detach the power window switch. Install the new power window switch, tighten the screws, and reconnect the connector. Test the window operation first to confirm the switch functions properly before reinstalling the trim panel.
8
2
Share

How to remove the fuel pump of Honda CRV?

Remove the rear seat of the Honda Fit vehicle, and use a flat-head screwdriver to pry open the cover plate of the Honda CRV fuel pump. Take off the cover plate of the Honda CRV fuel pump and unplug the connector of the Honda CRV fuel pump. Disconnect the fuel inlet pipe of the Honda Fit, then remove the entire fuel pump of the Honda CRV. Be extremely careful to avoid any open flames or sparks during the process. During installation, note that there are two very small oil drain holes on both sides of the fuel pump base, and no oil should drip from them. Since the fuel pump is immersed in gasoline for a long time, the sealing ring is prone to aging. When installing the fuel pump, check whether the sealing rings on the inlet and outlet pipes are aged or worn.
2
1
Share

How to Replace the Wiper Switch Assembly on a Buick Excelle?

During disassembly, first push the wiper towards the base of the wiper arm. Once it is completely detached from the wiper arm interface, pull it out in the opposite direction. Before pulling it out, rotate the movable wiper blade slightly; otherwise, it may encounter resistance during removal. Installation follows the reverse order of disassembly. First, insert the wiper interface into the wiper arm. During this step, the wiper arm clip must pass through the wiper frame. Then, pull the U-shaped connector upwards into the U-shaped clip. If you hear a crisp "click" sound, it indicates that the installation is properly seated. After installing the new motor, it is advisable to first plug in the power connector to test whether it operates normally.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.