What materials are needed for new energy vehicle license plate registration?

2 Answers
MargaretMarie
07/29/25 8:43am
Materials required for new energy vehicle license plate registration are as follows: 1. Original ID card of the owner + copy (non-local residents are advised to bring the original residence permit + copy); 2. Original vehicle registration certificate (green book) + copy; 3. Original driving license. Below is relevant information about new energy vehicle license plate registration: 1. New vehicle registration: The conditions, procedures, and requirements for registering new energy vehicles remain the same as before. 2. License plate replacement for registered new energy vehicles: For already registered new energy vehicles, owners can voluntarily choose whether to replace their license plates with the new style based on the principle of voluntary replacement. The list of vehicles eligible for replacement will be published on the internet traffic safety comprehensive service management platform. Owners within the published scope can voluntarily schedule the location and time for replacement online based on their own circumstances.
Was this review help?
7
3
Share
CassidyLee
08/11/25 6:18pm
Last time I bought a new energy vehicle and found that all the documents needed to be prepared when registering the license plate. First, you need the original purchase invoice to prove the car is yours; the vehicle certificate is also important, and for imported cars, a conformity certificate is required. Don’t forget to bring your ID card and a copy—if you’re from out of town, a temporary residence permit might be needed. The compulsory traffic insurance policy is essential—I printed out the electronic version provided by the insurance company. New energy vehicles are exempt from purchase tax, but you still need a tax exemption certificate, which I obtained from the dealer. For the environmental protection certificate, the DMV usually provides a new energy vehicle exemption form to fill out. The whole process took me a whole morning, so I recommend making an appointment with the DMV in advance and bringing the vehicle’s VIN rubbing and photos to avoid wasted trips. I saw some people forget the invoice copy and had to go back, which was a hassle. In short, having all the documents ready will save you trouble.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What to Do When the Automatic Transmission P Gear Cannot Be Engaged?

Automatic transmission P gear locking mechanism consists of a locking gear, a locking pin, and a set of motion mechanisms. After engaging the P gear, the cable drives the connecting ball pin, at which time the working pin slides to make the locking pawl tightly fasten the parking gear, and the vehicle's gear shift is locked, making it impossible to pull the gear lever. Below are the relevant introductions: 1. Solution for when the automatic gear lever cannot be pulled in P gear: If you need to shift to other gears, you must first start the vehicle and then engage other gears; or press the brake pedal and then switch gears. When parking, always ensure the vehicle is completely stopped before engaging the P gear, otherwise, it is easy to encounter this situation where the gear lever cannot be pulled in P gear. 2. Working principle of the automatic P gear: When the gear lever is placed in P gear, the parking lock mechanism locks the transmission output shaft. In P gear, the drive shaft is partially locked inside the transmission, so even without pressing the brake on flat ground, the vehicle has a certain braking force.
15
3
Share

How to Adjust Gas Idle Vibration?

Methods to adjust gas idle vibration: 1. If the idle jet and idle air jet are clogged, clean them with gasoline or acetone and blow them through with compressed air; 2. If there is air leakage at the intake manifold or the lower gasket of the carburetor, use tightening screws or add/subtract gaskets to fix it; 3. If idle instability is accompanied by a decrease in engine power, further check the spark plugs' condition, the sealing performance of the valves, and the correctness of the ignition timing. If necessary, perform maintenance and adjustments. The main causes of gas idle vibration include: uneven combustion of natural gas, clogged idle air jets, poor performance of the idle device, weak spark in individual spark plugs, poor sealing of individual valves, air leakage in the intake manifold, and ignition timing that is too early or too late.
11
1
Share

How to Define a Stock Vehicle?

Vehicles that have been in stock for more than 90 days are defined as stock vehicles, while those in stock for more than 180 days are classified as long-term stock vehicles. Methods to identify whether a vehicle is a stock vehicle include checking the vehicle's nameplate, manufacturing date, tire wear and production date, engine compartment, and inspecting the body for signs of aging or detachment of rubber components. Although stock vehicles can be purchased, it is not advisable to choose vehicles that have been in stock for an excessively long time. It is recommended to limit the vehicle's age to within one and a half years. For vehicles that have been in stock for more than one and a half years, the aging of various components has reached a significant level, and some wear-prone parts may even be out of warranty, making them not worth purchasing.
11
1
Share

Can I replace the air filter myself?

You can replace the air filter yourself. The operation method is: 1. Open the car door and pull the engine hood switch; 2. Pull the engine hood switch and support it up; 3. Unscrew the screws of the air filter housing, remove the old air filter and install the new one. The air filter is a type of filter, also known as an air cartridge, air cleaner, or air element. It is mainly used for air filtration in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. During operation, the engine needs to inhale a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinders, accelerating the wear of the piston group and cylinders.
3
3
Share

How to turn on the heating in Volkswagen Tiguan?

The method to turn on the heating in Volkswagen Tiguan: With the car running, turn on the interior circulation, turn off the AC switch, adjust the temperature control knob to the red heating zone, and then turn on the fan. The Tiguan is a compact SUV under Volkswagen, with dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, and a wheelbase of 2684mm. The Tiguan is equipped with three engines: a 1.4L turbocharged engine, a 1.8L turbocharged engine, and a 2.0L turbocharged engine. The car is front-wheel drive, matched with a 7-speed dual-clutch transmission, with ventilated disc front brakes and disc rear brakes.
15
4
Share

How often should the brake pads of a new car be replaced?

There is no specific replacement time for the brake pads of a new car. The replacement interval varies depending on the owner's driving environment and habits. If the car is equipped with a brake sensor line, the dashboard will alert the owner when the brake pads reach the wear limit, prompting timely replacement to ensure driving safety. Brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT4 oven temperature tracker to ensure the temperature distribution and quality. The heat insulation layer is made of non-heat-conducting materials.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.