What materials are needed for a temporary license plate?

1 Answers
DiAxel
07/29/25 6:43pm
Materials required for a temporary license plate are as follows: original and photocopy of the vehicle certificate; original and photocopy of the third copy of compulsory traffic insurance; original and photocopy of the first copy of the car purchase invoice; original and photocopy of the owner's identity proof; non-local owners need the original and photocopy of the owner's temporary residence permit. Situations where a temporary license plate can be applied for are as follows: 1. When purchasing a car: When driving the vehicle from the place of purchase to the place of use, a temporary license plate must be applied for at the local vehicle management office where the car was purchased. 2. Vehicle transfer: When the official license plate has been surrendered, a temporary license plate must be applied for at the local vehicle management office to drive back to the original location. 3. Not applying for an official license plate: For a new car that has not applied for an official license plate in the local area and needs to be driven to another location for modification, a temporary license plate must be applied for locally. After modification is completed, a temporary license plate must be applied for at the local vehicle management office to drive back to the original area.
Was this review help?
12
1
Share
More Forum Discussions

What is the Difference Between Semi-Slick Tires and Regular Tires?

The differences between semi-slick tires and regular tires lie in their properties, design, weight, and contact area. Here are the specific details: Different Properties: Compared to full-slick tires, semi-slick tires are characterized by their ability to generate strong grip, similar to full-slick tires, when the tire temperature rises due to high-speed friction. However, they do not pick up as much dust and their wear rate remains within acceptable limits. This is one of the key differences between semi-slick tires and regular tires. Different Design: Regular tires are designed for daily use in household cars, with tread patterns optimized for water drainage, performing well on both dry and wet roads. Semi-slick tires, on the other hand, are more performance-oriented, featuring lower weight and a reduced aspect ratio to enhance wheel agility. Different Weight: The sidewalls of semi-slick tires are much stiffer than those of regular tires, improving their structural support. Additionally, the incorporation of high-tech fibers in their composition makes semi-slick tires lighter than regular tires. Different Contact Area: Semi-slick tires have larger tread blocks, increasing the tire's surface contact area compared to regular tires. This larger contact area reduces tread deformation and, combined with stiffer sidewalls and a lower aspect ratio than regular tires, provides drivers with better road feedback and a more pronounced sense of control.
18
4
Share

Is 4 Liters of Engine Oil Enough for the Regal?

Adding 4 liters of engine oil is sufficient for the Regal. Here is extended information about the functions of engine oil: 1. Lubrication: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of the relatively sliding parts, thereby reducing wear. 2. Auxiliary Cooling: Engine oil has a relatively low specific heat capacity and is located inside the engine, so it does not inherently have a cooling effect. However, during engine operation, the heat energy generated by fuel combustion can be carried back to the oil tank by the engine oil and then dissipated into the air, assisting the radiator in cooling the engine. The actual cooling is performed by the water (or antifreeze liquid) outside the engine shell. 3. Cleaning: High-quality engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation. The flow of the lubricating oil washes away contaminants generated on the working surfaces of the parts. 4. Sealing and Leak Prevention: Engine oil can form a sealing ring between the piston rings and the piston, reducing gas leakage and preventing external pollutants from entering. 5. Rust and Corrosion Prevention: Lubricating oil can adhere to the surfaces of parts, preventing contact with water, air, acidic substances, and harmful gases.
16
1
Share

How to Practice Foot Control to Maintain Steady Throttle?

Maintaining steady throttle requires gentle pressing and gradual lifting, with smooth and even movements. Below are relevant introductions about throttle control: Gentle Pressing and Gradual Lifting, Smooth and Even: When operating the throttle pedal, the right heel should rest on the floor of the driver's compartment as a pivot point, with the sole gently pressing on the accelerator pedal. Use the ankle joint's flexion and extension movements to press down or release. When pressing or lifting the throttle pedal, the force should be gentle, achieving a light press and gradual lift. Coordinated Cooperation: When starting the engine, do not press the throttle pedal all the way down; it's better to have it slightly above the idle throttle. When starting, applying throttle should slightly precede the clutch engagement point, with the throttle opening preferably at a medium-small level. Releasing the clutch should be closely coordinated with pressing the throttle, with swift movements. When shifting gears, the coordination between adding neutral throttle, pressing the clutch, and pressing the throttle pedal should be harmonious. Reasonable Acceleration: When driving uphill, do not press the throttle pedal all the way down. When using a low gear, the throttle should generally be pressed halfway. When the car is climbing a slope, do not press the throttle pedal all the way down either. If the car is moving and the throttle pedal is pressed three-quarters of the way but the engine still cannot increase speed accordingly, shift to a lower gear and then press the throttle pedal to accelerate.
15
5
Share

Release Time Frame of the Tenth Generation Accord?

The tenth generation Accord was launched on April 16, 2018. Below is more information about the tenth generation Accord: 1. The 2018 tenth generation Accord Hybrid is equipped with Honda's latest i-MMD dual-motor hybrid system: the overall structure is similar to the ninth generation Accord Hybrid system, with improvements and optimizations to the engine, motor, and battery compared to the previous generation. The 2.0L Atkinson cycle engine has been optimized internally to enhance maximum thermal efficiency and the efficiency range, ensuring that most of the engine's operating range falls within the high-efficiency zone. 2. The new generation Accord has evolved towards a more youthful direction in terms of exterior and configurations: the new model features full LED headlights, LED front fog lights, headlight height adjustment, and power-adjustable exterior rearview mirrors. To create a sportier look, the new Accord adopts a fastback design similar to the Civic. The interior of the new generation Accord has also been fully upgraded, with an 8-inch floating touchscreen, touch-sensitive buttons paired with a rotary knob for enhanced operability and a tech-savvy feel. The infotainment system features a customizable app-icon interface and supports Apple CarPlay and Android Auto connectivity. 3. The tenth generation Accord was released in six versions, divided into 230TURBO and 260TURBO variants: the 230TURBO has a maximum horsepower of 177 hp, while the 260TURBO version delivers up to 195 hp.
9
5
Share

Does one mistake in the simulated lighting test during Subject 3 result in failure?

During the Subject 3 examination, making even one mistake in the simulated lighting test will result in failure. Additional details are as follows: Deduction of 100 points: Failing to correctly turn on the lights, deduction of 100 points; Using high beams when following another vehicle closely in the same direction, deduction of 100 points; Not alternating between high and low beams when passing through sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signals, deduction of 100 points; Not using low beams as required when meeting another vehicle, deduction of 100 points; Using high beams when passing through an intersection, deduction of 100 points; Not alternating between high and low beams to alert the vehicle being overtaken during overtaking, deduction of 100 points; Using high beams when driving on well-lit roads with streetlights, deduction of 100 points; Not turning off headlights or not turning on parking lights when temporarily parked by the roadside, deduction of 100 points; Not using high beams when entering roads with no or poor lighting, deduction of 100 points.
7
1
Share

What is the maximum power of the Haval H6?

Haval H6's maximum power is 145kw. Haval engine parameters: The Haval H6 engine is domestically produced and independently developed by Great Wall Motors. The 2.0GDIT direct-injection turbocharged engine has seen significant improvements in various parameters, with a maximum power of 145kW and a maximum torque of 315N.m. It incorporates many leading technologies such as direct injection, turbocharging, and dual VVT. Haval H6 has two drive forms: The Haval H6 is positioned as a city SUV, and in terms of drive form, it offers both two-wheel drive and four-wheel drive modes.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.