···
Log in / Register

What materials are needed for a driver's license replacement?

4 Answers
JessicaAnn
07/29/25 8:30am

To replace a driver's license, you need to provide the original and a copy of the motor vehicle driver's identity document. Here are some important notes regarding driver's license replacement: Do not drive during the interim period: If your driver's license is damaged and you apply for a replacement, you cannot drive with the original license during the interim period before receiving the new one. Doing so will be considered driving without a license. The original license becomes invalid: After obtaining a replacement driver's license, the original motor vehicle driver's license becomes void. Other documents: Besides loss or damage, another reason for replacement is when the license expires. In this case, you need to bring the original and a copy of the physical condition certificate to apply for a new license.

Was this review help?
19
3
Share
AdelineFitz
08/12/25 5:36am

I've also gone through the process of replacing a driver's license myself, and while it's not particularly troublesome, you do need to have all the necessary documents prepared. Remember to bring the original and a photocopy of your ID card—this is the most basic requirement and shouldn't be forgotten. You'll also need one-inch white background photos, and it's best to bring a few extra in case you don't have enough. When filling out the replacement application form, clearly state the reason for the loss—don't be vague. The fee is around a few dozen yuan, though it may vary slightly depending on the location, so check the local traffic management office's standards in advance. Additionally, it's advisable to photocopy your household registration or residence certificate to have on hand, as they sometimes request these. The entire process at the traffic management office is quick—just queue up, and you can get your new license in a few days. Bringing extra related documents is always a good idea to save yourself the hassle of making multiple trips, which can be quite time-consuming. Since replacing a driver's license involves personal information security, remember to keep copies of all your materials safe after the process is complete.

Was this review help?
14
0
Share
Expand All
VanTravis
10/05/25 6:44am

Losing my driver's license last time was really annoying, but I figured out the key points for replacement. The essential materials are the original ID card and its photocopy—remember to copy both sides clearly. Bring a one-inch bareheaded photo with a white background when applying, as that's the standard. When filling out the form, briefly describe how you lost it. Fees vary by location, usually around 50-60 yuan, payable in cash or via QR code. Also, prepare a photocopy of your household registration or residence permit, as they might check your residential address. The replacement is done at the traffic management office—don't go to the wrong place. The whole process takes about half an hour, and the new license arrives by mail within a week. It's advisable to call ahead to confirm details and avoid wasted trips. You'll get the hang of it after doing it once—having all the materials ready is super important.

Was this review help?
19
5
Share
Expand All
SanColeman
11/18/25 8:14am

The materials required for a driver's license replacement are few but must be precise. First, bring the original ID card along with copies—make several copies for backup. Second, prepare two one-inch white-background color photos. When filling out the replacement application form, briefly describe the loss situation, such as forgetting it in the car. The fee is usually around 40 to 50 yuan, payable on-site. Also, bring a copy of your household registration or residence permit for address verification. The entire process is handled at the traffic management office counter—arrive early to avoid crowds. With all materials ready, it’s quick, and the new license arrives in a few days. A personal tip: bring a bottle of water to stay hydrated while waiting in line—small details make the process smoother.

Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the issue with the Audi hydraulic oil elbow bushing noise?

Audi hydraulic oil elbow bushing noise issue is caused by valve oil leakage and joint detachment. Below is the relevant introduction: 1. Introduction: Audi is a renowned car developer and manufacturer, with its logo featuring four interlocking rings. It is now a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. 2. Main models: Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, and the S, RS performance series, etc.
17
2
Share

Why are second-hand Besturn B50 cars so cheap?

First, the pricing is not high; second, the sales of new cars are not good, with continuous price reductions leading to depreciation of used cars; third, the marketing is poor. Additional information is as follows: 1. In terms of comfort: The Besturn B50 continues to optimize vibration and noise control, achieving improvements in areas such as passing noise and constant-speed driving vibration noise, enhancing the quietness of the cabin space. At the same time, the Besturn B50 is also equipped with an audio system configuration, such as the addition of an AUX interface, forming two external audio source playback functions with USB, providing users with more choices. 2. In terms of configuration: The Besturn B50 adds a cornering assist lighting system, which can automatically control the cornering lights (front fog lights) based on changes in driving conditions and vehicle status. In addition, new safety equipment includes a reminder for the front passenger seatbelt not being fastened, anti-whiplash seats, full hidden airbags, central locking, and headlight level adjustment.
1
5
Share

Tesla's Maximum Wading Depth?

Tesla's maximum wading depth is 138mm. Tesla's wading depth is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. Alternatively, installing a wading snorkel can increase the height of the engine's air intake, thereby increasing the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could lead to severe damage if water enters the engine. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or other vehicles' wheels and doors as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route instead.
11
4
Share

Should the Nissan Sylphy ECO Mode Be Turned On?

In congested urban traffic conditions, turning on the ECO mode yields the best results, while it is unnecessary during high-speed driving. In stop-and-go city traffic, strong power is not required, and frequent acceleration and braking lead to higher fuel consumption. Activating the ECO mode in such scenarios not only reduces fuel consumption but also enhances driving comfort. Scenarios where ECO mode is unnecessary: There are a few situations where ECO mode is not needed: 1. When the car is driving at high speeds (up to 100km/h), even if ECO is turned on, the vehicle's computer will prioritize speed, causing the ECO mode to automatically deactivate. 2. When high torque output is required, such as when climbing hills, the engine computer will prioritize delivering sufficient power to drive the vehicle, and the ECO mode will automatically deactivate. Location of the ECO button: The ECO button is typically located on the left side of the car, marked with the letters 'ECO.' Some models feature a green button, making it easily identifiable.
12
2
Share

Do I Need to Change to Snow Tires When Driving to Northeast China During the Spring Festival?

Driving to Northeast China requires snow tires, as their grip performance is significantly better than regular summer tires or all-season tires. If you encounter icy roads, most vehicles without snow tires will be unable to move. Snow tires help vehicles achieve optimal braking performance on winter roads. Snow tires, also known as winter tires, are made by adding certain additives to ordinary rubber during production, ensuring the tires do not harden significantly in winter. Regular tires tend to become very hard in winter, reducing their grip and making them prone to slipping in snowy conditions. The tread material of snow tires is softer, and their specially formulated silica-mixed rubber compound allows for tighter contact with smooth ice surfaces, generating greater friction than all-season tires. This improves the vehicle's handling and safety on icy roads. Tires are rubber products, and prolonged use leads to aging. Therefore, it is recommended that car owners replace their tires regularly. Generally, tires should be replaced every four years. When purchasing tires, make sure to check the production date clearly.
16
2
Share

Where is the China VI Emission Standard Implemented?

The China VI emission standard has been implemented ahead of schedule in regions such as Beijing-Tianjin-Hebei, Yangtze River Delta, Pearl River Delta, Chengdu-Chongqing, Fenwei Plain, and Inner Mongolia. Specific provinces and cities include Beijing, Tianjin, Hebei, Shanxi, Shandong, Henan, Shanghai, Jiangsu, Zhejiang, Anhui, Shaanxi, some cities in Inner Mongolia, Guangdong, Chongqing, Sichuan, and Hainan. The early implementation regions are based on national-level documents such as the 'Blue Sky Defense Battle' and the 'Action Plan for the Battle Against Pollution by Diesel Trucks,' combined with statistics, leading to the issuance of the 2019 document on the early implementation of the China VI standard in these provinces and cities. For light vehicles (such as cars, SUVs, pickup trucks, and micro trucks), the normal implementation time for the China VI standard is July 1, 2020. For general-purpose heavy-duty vehicles, the implementation date is July 1, 2021.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.