What material is used in Tesla batteries?

What is the fuel tank capacity of the BYD Qin Plus DM-i in liters?

The fuel tank capacity of the BYD Qin PLUS DM-i is 48 liters, as officially announced. Owners who have purchased the BYD Qin PLUS DM-i can also check this information on the vehicle's configuration sheet. The BYD Qin PLUS DM-i uses 92-octane fuel, with a fuel consumption of 3.8L per 100 kilometers. A full tank can cover a distance of approximately 1,263 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling situations, the amount of fuel filled may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill limit, and there is additional space from the safe limit to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

17

5

Share

Does Rain Affect a Car Right After Tinting?

Rain does not affect a car right after window tinting, as the film is typically applied to the interior side of the windows. As long as the windows are kept closed, rain exposure is not an issue. However, it is important to note that while rain itself is not harmful, you should avoid rolling down the windows or getting the film wet immediately after application. Below are some relevant points: 1. The environment for car window tinting is crucial. The workspace is usually enclosed, and dust prevention measures should be taken, such as sealing the dashboard and windshield with plastic wrap to prevent airborne particles from contaminating the film. 2. After tinting, avoid rolling the windows up and down. The film tends to be tight initially, and opening/closing the windows can cause the edges to peel or curl, potentially damaging the film. 3. For the first week after tinting, avoid wiping the film. Fogging or haziness may appear on the film, which is normal and will fade over time. 4. After tinting, it is advisable to park the car in a sunny location.

11

2

Share

How Long Does It Take to Pick Up a BYD Song Plus-DMI?

It generally takes about three months to pick up a BYD Song Plus-DMI. Here are the precautions for picking up the car: 1. Check if all the accompanying items are complete: The accompanying items of a car usually include the instruction manual, user manual, maintenance manual, spare tire, jack, tire-changing tools, first aid kit, etc. 2. Inspect the car: When inspecting the car, first check the exterior paint for any flaws, then look for signs of rust or tampering on the main screws in the engine compartment. After checking the exterior and engine compartment, inspect the interior for any defects, and finally start the engine for a test drive. If everything is fine, you can proceed to the vehicle management office for registration.

12

0

Share

What Causes the Car to Shake When Just Started?

Here are the reasons why the car body shakes when just started: 1. The throttle is dirty or the fuel injectors have excessive carbon deposits. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts. This causes the car body to shake when just started and makes the vehicle difficult to start. 2. It is recommended to clean the fuel system and check whether the idle speed motor has carbon deposits and clean them off. 3. Check the working condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak spark plug firing can also lead to such symptoms. The solution is to check if the spark plugs have excessive carbon buildup and replace them if necessary. 4. If you have already cleaned the engine carbon deposits, cleaned the throttle, replaced the oil seals and spark plugs, but still notice the car body shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor for proper functioning. Abnormal fuel pump supply pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car body to shake. Also, check the fuel pressure and replace components if necessary.

8

5

Share

Can I cancel after successfully scheduling the third subject test?

You can cancel after successfully scheduling the third subject test. If you need to cancel after the exam appointment is confirmed, you must do so at least three working days before the scheduled exam date. You or a staff member from the driving school should bring the original ID card (for non-local residents, a residence permit is required) to the examination service window of the municipal vehicle management office to cancel. Below are the methods to cancel the appointment after successfully scheduling the third subject test: 1. The driving test center information platform allows you to cancel the third subject test appointment, with the latest cancellation time being before 12:00 on the day before the scheduled exam date. 2. To cancel the third subject test, you must personally bring your ID card and a copy of your ID card to the vehicle management office. On the blank space of the ID card copy, you must write 'I voluntarily cancel the third subject test scheduled on xx/xx/xxxx at xx driving school,' and sign your name, contact information, and the date in the blank space. 3. If you are unable to come to the driving test center to handle the cancellation, the proxy must bring their own ID card and a copy, along with the ID card and copy of the person canceling. In addition to writing the above content in the blank space, the proxy must also sign their name.

20

4

Share

Why can't the Jetta start even though it has power?

The reason why the Jetta has power but cannot start is due to an issue with the starter fuse. Below is an introduction to relevant knowledge about the Jetta: 1. Brand Introduction: Jetta is a car brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. Its first product, the Jetta (Jetta-MK1), was launched in Europe in 1979. 2. Design: All models of the new Jetta brand adopt a family-style front face design. The sedan models inherit the classic Volkswagen Jetta's appearance foundation, perfectly embodying German genes and Volkswagen quality across the entire brand.

9

3

Share

What material is used in Tesla batteries?

What is the fuel tank capacity of the BYD Qin Plus DM-i in liters?

Does Rain Affect a Car Right After Tinting?

How Long Does It Take to Pick Up a BYD Song Plus-DMI?

What Causes the Car to Shake When Just Started?

Can I cancel after successfully scheduling the third subject test?

Why can't the Jetta start even though it has power?

How to Handle Violations of the Beijing Entry Permit?

What Causes a Volkswagen Car to Fail to Start with a Clicking Sound?

What is the top speed of KTM390 in first gear?

Why Are Used Honda Spirior Cars Cheaper Than Accord?