···
Log in / Register

What material is generally used for sunroof glass?

3 Answers
DiDaniel
08/29/25 5:17am
Automotive sunroof glass is made of tempered glass. Since tempered glass breaks into uniform small particles without the sharp, knife-like edges of regular glass when shattered, it is known as safety glass and is widely used in automobiles and interior decoration. The specific introduction of automotive sunroof is as follows: Automotive sunroof glass maintenance: You can often clean it with fine talcum powder. The moving parts of the sunroof are made of low-maintenance materials, and the mechanical parts should be cleaned regularly with oil or lubricant. It is recommended to clean them every two months; after prolonged use of the sunroof, a considerable amount of sand particles usually deposit in its sliding tracks and gaps. If not cleaned periodically, these particles can wear down the sunroof components. Regularly clean around the sliding tracks to avoid sand particle deposition and extend the service life of the sunroof sealing ring. Generally, after 2 to 3 months of use, clean the sealing strips or sliding tracks with gauze dipped in cleaning water, then wipe them dry and apply a small amount of oil or butter; before opening the sunroof, check whether there are any obstacles on the roof that might hinder the movement of the glass panel. The design of the sunroof panel includes functions to block heat and ultraviolet rays. Please clean it with a soft cloth and cleaning agent, and avoid using sticky cleaning agents; the main concern when using a sunroof is rain or water leakage. Proper use and maintenance of the sunroof can effectively prevent leakage. Before the rainy season, in addition to cleaning dust and sand from the sliding tracks and gaps of the sealing strips, you should also spray a small amount of plastic protective agent or talcum powder on the sealing strips and other components; in winter after snow or car washing, the sunroof glass and sealing rubber frame may freeze. Forcing the sunroof open at this time can easily damage the sunroof motor and rubber sealing strips. The correct approach is to open the sunroof after snow or car washing and dry any residual water around the edges; on bumpy roads, it is recommended not to fully open the sunroof, as excessive vibration between the sunroof and sliding tracks may cause deformation of related components or even damage the motor. Additionally, it is strictly prohibited to open the sunroof during rain or when washing the vehicle. Automotive sunroof classification: Automotive sunroofs can be roughly divided into: sliding-out type, built-in type, built-in flip-up type, panoramic type, and curtain type. They are mainly installed on commercial SUVs, sedans, and other vehicle models.
Was this review help?
11
1
Share
OValerie
09/11/25 3:02am
The glass material used in car sunroofs is no ordinary choice—it typically involves tempered glass or laminated glass. From my experience, tempered glass is the most common. It undergoes special treatment to become exceptionally hard, ensuring that in the event of an impact, it won’t shatter into dangerous shards, which is crucial for enhancing the vehicle’s overall safety. I’ve also seen some high-end models use composite laminated glass with an added plastic film layer, which provides better noise and heat insulation, making driving and riding more comfortable. Of course, maintaining such glass requires attention—regular cleaning is key, as dust buildup can affect transparency and, over time, may lead to sealing issues and leaks. In short, choosing the right material ensures clear visibility while making travel safer and more reliable.
Was this review help?
20
4
Share
Expand All
VanessaMarie
10/25/25 3:52am
I've been driving my own car for several years, and the sunroof glass is mainly laminated tempered glass, which is super practical. It effectively blocks UV rays, so even on scorching hot days, the interior temperature doesn't skyrocket. Plus, it has good sound insulation, so there's hardly any noise when driving on the highway with the window open. I think material selection depends on the manufacturer's positioning and cost-effectiveness. Regular cars use strengthened glass for lower costs and easier maintenance, but I recommend checking the sealing strips monthly to prevent water accumulation from corroding the glass edges. Some cars use tinted glass for sun protection, which looks cool without affecting visibility. From a usability perspective, this glass design is quite user-friendly, and opening the sunroof for a breeze is incredibly pleasant.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How to Open the Engine Hood of the Boyue?

The method to open the engine hood of the Boyue is: 1. Press the engine hood button on the left side of the steering wheel; 2. Get out of the car and gently lift the engine hood at the front of the vehicle. Taking the 2021 Boyue as an example, it belongs to the compact SUV category, with body dimensions of: length 4519mm, width 1831mm, height 1694mm, and a wheelbase of 2670mm, with a curb weight of 1575kg. The 2021 Boyue features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.8L turbocharged engine, delivering a maximum horsepower of 163ps, a maximum power of 120kw, and a maximum torque of 250nm, paired with a 6-speed manual transmission.
11
2
Share

Should the Electronic Parking Brake Be Released When Starting the Car?

When starting the car, it is necessary to release the electronic parking brake. The method of use is as follows: 1. To engage the electronic parking brake, press the brake pedal and pull up the electronic parking brake switch until the indicator light on the dashboard illuminates, and the switch's indicator light also turns on; 2. To disengage the electronic parking brake, press the electronic parking brake switch while holding the brake pedal, and the indicator lights on both the dashboard and the switch will turn off. The structural principle of the electronic parking brake involves the application of electronic parking brake technology in cars, specifically the caliper-integrated electronic parking brake system. This system replaces traditional parking brake levers, mechanical linkages, and cables with electronic buttons and motor components. When parking, after the driver operates the electronic parking brake system button, the electronic control unit will command the motors integrated into the left and right brake calipers to act, driving the brake caliper pistons to move and generate mechanical clamping force, thereby completing the parking process.
3
1
Share

What materials are used in the interior of the Volkswagen Touareg?

Volkswagen Touareg's interior features extensive leather upholstery, with piano black lacquer panels used in the center console area and simple wood trim on the front console. Taking the 2021 Touareg as an example, it is a mid-to-large-sized SUV with body dimensions of: length 4878mm, width 1984mm, height 1717mm, and a wheelbase of 2899mm. The 2021 Touareg is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 245PS, maximum torque of 370Nm, and maximum power of 180kW, paired with an 8-speed automatic transmission.
15
0
Share

What Causes Clutch Failure to Disengage?

Clutch disengagement failure may be caused by bent or deformed release levers, warped clutch driven plates, improper adjustment of the clearance between the master cylinder piston and push rod in hydraulic control mechanisms, or excessive clutch pedal free travel. The following are two manifestations of incomplete clutch disengagement: 1. During starting: When starting the vehicle, pressing the clutch pedal beyond the free travel still results in difficulty shifting gears; if forced into gear, the vehicle may move forward or backward before fully releasing the clutch pedal, causing the engine to stall. 2. During driving: Difficulty shifting gears or inability to engage gears while driving, accompanied by gear collision noises in the transmission.
9
5
Share

What type of brakes does the Fengxing SX6 use?

The front and rear brake types of the Fengxing SX6 are ventilated disc and disc, respectively. The function of the brakes is to reduce speed or bring the vehicle to a stop. Their working principle involves using the friction between the brake pads and brake drums, as well as between the tires and the ground, to convert the kinetic energy of the moving vehicle into heat energy through friction, thereby slowing down or stopping the car. Taking the 2020 Fengxing SX6 as an example, its body dimensions are: length 4720mm, width 1825mm, height 1790mm, wheelbase 2750mm, minimum ground clearance 190mm, fuel tank capacity 45 liters, and curb weight 1480kg.
1
3
Share

Is it Easy to Repair Dents on the Car's Lower Skirt?

Whether a dent on the car's lower skirt is easy to repair depends on the specific situation. Some car models have integrated skirts, making large dents difficult to fix, while others with detachable skirts are easier to repair—simply requiring some sheet metal work and repainting. For more details, it's advisable to consult a local professional repair shop or a 4S dealership. More related information is as follows:Sheet Metal and Painting: Sheet metal and painting is a car repair technique that involves restoring the deformed parts of the car's metal body. For example, if the car's outer shell has a dent from a collision, sheet metal work can restore it to its original shape. Then, by applying specialized paint, the deformed metal surface can be restored to match the rest of the undamaged areas, making it look as good as new.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.