···
Log in / Register

What maintenance should be done at 60,000 kilometers?

4 Answers
MacJordan
09/02/25 6:12am

At 60,000 kilometers, the following maintenance items should be performed: 1. Replace engine oil and oil filter; 2. Replace transmission fluid; 3. Inspect the braking system; 4. Check the power steering system; 5. Examine tire wear; 6. Replace spark plugs; 7. Clean the throttle body and fuel system; 8. Replace brake fluid. The purpose of maintenance is to filter impurities from the engine oil, air, and fuel, preventing them from entering the engine and affecting its normal operation. Regular maintenance can effectively extend the engine's lifespan, maintain the vehicle's cleanliness and proper technical condition, eliminate potential hazards, prevent malfunctions, and slow down the deterioration process.

Was this review help?
12
1
Share
AngeloFitz
09/14/25 8:13am

Having driven for over twenty years, I believe the 60,000-kilometer mark is a critical point where maintenance should be meticulous. First, change the engine oil along with the filter to prevent impurity buildup that could harm the engine. Spark plugs should be replaced, especially in older cars, as faulty ignition can lead to increased fuel consumption. Inspect the brake system for pad and disc wear, and test the brake fluid for moisture content—safety should never be overlooked. If tire wear is significant, rotate or replace them, and perform a wheel alignment and balancing for stability at high speeds. Automatic transmissions require fluid replacement, while manual transmissions need fluid level checks to avoid gear-shifting issues. Also, inspect the suspension; any unusual noises on bumpy roads indicate repairs are needed. Ensure the coolant is leak-free and clean to prevent overheating in summer. It's advisable to visit a reputable repair shop for a comprehensive diagnosis—don’t cut corners to save money and risk bigger problems.

Was this review help?
16
4
Share
Expand All
DelHazel
10/29/25 2:08am

My car just hit 60,000 kilometers, like a routine health check-up. Must change the engine oil, and the filter is essential too. The mechanic recommends regular maintenance for smooth operation. Check or replace the spark plugs; worn ones cause delayed ignition and slow acceleration. Test the brake fluid to see if it needs replacing, as it affects stopping safety. If the tire wear is uneven, get a wheel alignment—it saves fuel and ensures stability. Replace the air filter while you're at it for a comfortable cabin environment. Don't forget the cabin air filter; bacterial buildup affects health. Find a trusted shop with good prices, and book in advance to avoid queues. Simple maintenance saves hassle and money.

Was this review help?
3
1
Share
Expand All
VonAva
12/12/25 2:20am

At 60,000 kilometers, my focus is on family safety with minimal but essential maintenance items. Changing the engine oil ensures smooth operation and reduces the risk of unexpected failures. Checking tire pressure and wear, and timely replacement or balancing, prevents blowouts on highways to keep children safe. A thorough inspection of the brake system, including pad and disc wear, along with replacing brake fluid, maintains responsive braking distance. Topping up insufficient coolant prevents overheating dangers. These steps take some time but prevent problems before they occur, ensuring peace of mind during long trips.

Was this review help?
18
0
Share
Expand All
More Forum Discussions

Does replacing the brake master cylinder and ABS pump require bleeding?

Replacing the brake master cylinder and ABS pump requires bleeding. Working principle of ABS: During braking, the ABS quickly determines the wheel lock-up state based on the speed signals from each wheel speed sensor, closing the normally open input solenoid valve of the wheel that is starting to lock up to maintain the braking force. If the wheel continues to lock up, the normally closed output solenoid valve is opened, causing the braking pressure on that wheel to rapidly decrease due to the direct connection to the brake fluid reservoir, preventing the wheel from completely locking up due to excessive braking force. This keeps the braking state at the optimal point (slip ratio S of 20%), achieving the best braking effect and maximum driving safety. Classification of ABS: ABS is mainly classified based on channels. In ABS, the brake pipelines that can independently adjust the braking pressure are called control channels. ABS control channels are divided into four-channel, three-channel, two-channel, and one-channel types. One-channel ABS: Also known as single-channel ABS, it has a brake pressure regulator installed in the rear wheel brake master cylinder and a wheel speed sensor mounted on the rear axle differential (sometimes one on each rear wheel). Two-channel ABS: This type of ABS struggles to balance directional stability, steering control, and braking efficiency, and is rarely used today. Three-channel ABS: It independently controls the two front wheels, while the two rear wheels are controlled together based on the low-select principle (i.e., both wheels are controlled by one channel, ensuring the wheel with less traction does not lock up), also known as hybrid control. Four-channel ABS: It has four wheel speed sensors, with a brake pressure regulator installed in the pipeline leading to each wheel brake cylinder, enabling independent control and forming a four-channel control system.
15
5
Share

Differences Between Full-Face and Modular Helmets

There are several differences between full-face and modular helmets: Helmet noise: Full-face helmets provide additional protection for the rider's chin and face, as well as more protection from noise, sunlight, wind, rain, cold, insects, and stones. Modular helmets use a hinge to 'stitch' together the full-face design, allowing wind and noise to enter while riding, so modular helmets generally produce more noise than full-face helmets during rides. Helmet ventilation: Full-face helmets can become very hot in hot weather and restrict airflow to the face. Modular helmets can switch between an open-face and full-face configuration.
13
5
Share

What does 'driving a ghost fire' mean?

Driving a ghost fire refers to riding a type of motorcycle called 'ghost fire'. Introduction to Ghost Fire: English name RSZ. It is a smaller scooter model from Yamaha, equipped with a Taiwan Yamaha 100cc engine. Due to its cool appearance and affordability, it is highly favored and purchased by some students and young adults in the country. Configuration: Length × Width × Height (mm × mm × mm) are 1850 × 650 × 1150 respectively. Wheelbase (mm) 1250. Curb weight (kg) 112. Fuel tank capacity (L) 4.8. 112
14
0
Share

Is it normal for a helmet to pinch the face?

Helmet pinching the face is normal. Functions of a helmet: A motorcycle helmet (officially known as a motorcycle rider helmet) is a protective device designed for the head of motorcycle riders and passengers. Its primary purpose is to protect the rider's head from impact, preventing or reducing injuries and even saving the rider's life. Points to note when purchasing a helmet: The foam padding material in some helmets has very low density, even inferior to the foam padding used for packaging household appliances. If it can be easily broken by hand, it is substandard. The inner lining material may feel uncomfortable, so careful selection is necessary. Be cautious of unscrupulous small factories that use recycled materials to make helmets. Such helmets may shatter easily upon a light fall, emit odors and soften under sunlight, and may contain toxic or harmful substances from the recycled waste materials.
14
0
Share

How to complete the 6-point demerit online course for driver's license?

Drivers without any single 6-point demerit record or with only one single 6-point demerit record can directly complete the 7-day safe and civilized driving course online. Drivers with two or more single 6-point demerits or a full 12-point demerit must first register at the municipal vehicle management office and complete one day of on-site learning before proceeding with the remaining 6 days of online study. The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" are introduced as follows: 1. Introduction 1: When a motor vehicle driver accumulates 12 demerit points within one scoring cycle, the traffic management department of the public security organ shall detain their motor vehicle driver's license. The driver shall, within 15 days, report to the traffic management department of the public security organ at the place where the driver's license was issued or where the violation occurred to participate in a seven-day study of road traffic safety laws, regulations, and related knowledge. 2. Introduction 2: After the motor vehicle driver completes the study, the vehicle management office shall, within 20 days, conduct a test on road traffic safety laws, regulations, and related knowledge. If the test is passed, the demerit points will be cleared, and the motor vehicle driver's license will be returned. If the test is failed, the driver must continue the study and retake the test. Those who refuse to participate in the study or accept the test will have their motor vehicle driver's license suspended by the traffic management department of the public security organ. 3. Introduction 3: If a motor vehicle driver has two or more instances of reaching 12 points or accumulates 24 or more points within one scoring cycle, the vehicle management office shall also conduct a road driving skills test within 10 days after passing the road traffic safety laws, regulations, and related knowledge test. The road driving skills test shall be conducted according to the highest permissible vehicle type indicated on the driver's license.
12
3
Share

What are the dimensions of the Changhe Q7?

The dimensions of the Changhe Q7 are 4655mm in length, 1855mm in width, and 1720mm in height, with a wheelbase of 2670mm. The Changhe Q7 is a compact SUV equipped with a 1.5-liter turbocharged engine that delivers a maximum power of 110kW and a maximum torque of 200Nm. It features multi-point fuel injection technology and an aluminum alloy cylinder head. The side profile of the Changhe Q7 adopts a floating roof design, with the A, B, C, and D pillars finished in black, creating a visually striking effect. The rear of the vehicle features a full-width taillight design that enhances visibility and recognition when illuminated.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.