What maintenance should be done at 50,000 kilometers for a car?

1 Answers
ElleMarie
07/29/25 10:22am
The following maintenance should be performed at 50,000 kilometers for a car: 1. Replace engine oil and filter: Depending on the road conditions frequently driven on, normally change the oil every 5,000 kilometers; if there is a lot of dust, change the oil every 3,000 kilometers. 2. Check and replace brake pads: The lifespan of vehicle brake pads is about 4-5 years or 40,000 kilometers. The degree of wear varies depending on driving habits, driving environment, and speed. Generally, vehicles that frequently drive on highways experience minimal brake pad wear, while those often driven in the city with frequent traffic jams suffer more severe brake pad wear. 3. Check and replace spark plugs: They typically last 2-3 years or 20,000-30,000 kilometers. However, if the vehicle shows signs of insufficient power or acceleration shaking, it may indicate a problem with the spark plugs, which should be checked as soon as possible. 4. Clean the throttle body and fuel injectors: Over time, the throttle body and fuel injectors can accumulate dirt or carbon deposits and require regular cleaning. Generally, vehicles that have run over 50,000 kilometers need to be checked and cleaned, but the cleaning frequency should be determined based on the driving environment. 5. Clean the radiator: When a vehicle has been driven over 40,000-50,000 kilometers, the radiator often accumulates dirt and grime, affecting its cooling and cleaning functions for the engine. 6. Replace brake fluid: In addition to brake pads, brake fluid should also be replaced regularly. It can be replaced along with the brake pads or based on the mileage driven. 7. Pay attention to the tires, especially the spare tire: The typical lifespan of vehicle tires is also 4-5 years. Even if the mileage is low, tires often exposed to sunlight can age significantly. Therefore, if there are large cracks on the tire sidewalls or the tread pattern has reached the minimum limit, check whether they need to be replaced. Also, don’t forget to replace the spare tire. Although it is not used frequently, it is better to be prepared.
Was this review help?
20
0
Share
More Forum Discussions

How to Fold Down the Rear Seats of a Santana?

The rear seats of the Santana model are fixed with screws, so they can only be removed and cannot be folded down. The Santana has a body size of 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. It is equipped with a 1.6L engine, codenamed EA211, with a maximum power output of 81KW, and features a lightweight all-aluminum construction. On the side profile, the Santana doesn't have many highlights, with an overall simple design devoid of exaggerated lines. The waistline running from the front to the rear gives the body a dynamic tension, while the chrome trim below the window is simple yet aligns with Chinese consumers' aesthetic preferences, also contributing to an enhanced sense of quality.
11
5
Share

How to Use the Paddle Shifters Below the Steering Wheel?

Methods for using the paddle shifters below the steering wheel: 1. Power on and start the vehicle; 2. Press the upshift paddle with your hand and then release the brake; 3. After releasing the brake, start the vehicle and gently press the accelerator. Paddle shifters are gear-shifting devices installed for semi-automatic clutches in cars, designed to allow gear changes without stepping on the clutch pedal, directly by pulling the paddle shifters. Types of paddle shifters: 1. Fixed type: The paddle shifters remain stationary relative to the dashboard, meaning during steering, the steering wheel turns while the paddle shifters stay still; 2. Follow-up type: The paddle shifters remain stationary relative to the steering wheel, meaning during steering, the paddle shifters rotate along with the steering wheel as a whole.
12
5
Share

What does an exclamation mark on a steering wheel mean?

A steering wheel with an exclamation mark is the electric power steering system warning light, indicating a fault in the vehicle's electric power steering system. The electric power steering system indicator light remains illuminated when the ignition switch is turned on or during driving, signaling a fault in the electric power steering system. Please promptly visit the nearest 4S store or repair shop for inspection and repair. Reasons for the electric power steering system fault light to illuminate include: 1. The fault light remains constantly lit, indicating a complete failure of the electric power steering system, requiring inspection and replacement of faulty components at a repair facility; 2. The light briefly illuminates for five to ten minutes and then turns off, which is caused by overheating of the electric power steering motor. The electric power steering system will enter an overheating protection mode, reducing or temporarily suspending motor assistance, and will restore assistance once the motor temperature decreases.
13
1
Share

How Much Engine Oil Should a Jog 100 Take?

Jog can take up to 1 liter of engine oil. Precautions for adding engine oil to motorcycles: Strictly follow the brand and grade of lubricating oil specified in the manual and try to purchase from reputable stores or direct sales outlets of manufacturers. When selecting a lubricating oil brand, beware of counterfeit and inferior products. Observe changes in oil quality and viscosity. High-quality oil is heavy in color but not black, and feels smooth but not sticky when rubbed between fingers, while inferior oil is the opposite. Effects of excessive engine oil: Excessive engine oil increases the resistance of moving parts. At the same time, excess oil can easily enter the combustion chamber and participate in combustion, causing slow and incomplete combustion, leading to unstable engine idle and easy stalling, as well as sluggish acceleration response.
13
1
Share

What is the reason why the Haval F7 Bluetooth music cannot be connected?

Haval F7 Bluetooth music cannot be connected due to reasons such as Bluetooth device disconnection or Bluetooth device being muted. The specific details are as follows: Bluetooth device disconnection: The car's Bluetooth and the phone's Bluetooth device are disconnected, making it impossible to play music from the phone through the Bluetooth speaker. You can check the connection status on the phone and reconnect. Bluetooth device muted: The car's Bluetooth device has been muted with one key, making it impossible to play music. Check the volume settings of the Bluetooth device and adjust them accordingly. Phone music player muted: If the phone's music player is muted, naturally the music cannot be played externally. Check the volume of the phone's music player and adjust it to an appropriate level.
11
3
Share

What Causes Inability to Shift Gears After Replacing the Clutch Three-Piece Set?

Possible reasons include unqualified dimensions of the clutch three-piece set, most likely due to an excessively thick friction plate. Clutch Location: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. The clutch is a common component in mechanical transmissions, allowing the drivetrain to be engaged or disengaged as needed. Basic Requirements for Clutches: Smooth engagement, quick and thorough disengagement; easy adjustment and repair; compact size; lightweight; good wear resistance and sufficient heat dissipation capacity; easy and effortless operation. Commonly categorized into jaw-type and friction-type clutches.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.