What maintenance should be done at 25,000 kilometers for a car?

2 Answers
FaithMarie
09/04/25 3:33am
Maintenance items for a car at 25,000 kilometers include: 1. Replace the fuel filter and air filter; 2. Check the clutch travel, steering lower arm ball joint clearance, fixation, and dust cover; 3. Inspect the tread depth, tire pressure, and tire wear condition; 4. Check if the throttle body and idle speed valve are dirty, clean if necessary; 5. Examine the condition of the spark plugs, replace if needed, and perform a no-disassembly cleaning of the fuel injectors; 6. Inspect the power steering, braking system, and automatic transmission. The purposes of car maintenance are: 1. To keep the vehicle clean and maintain normal technical conditions; 2. To eliminate hidden dangers and prevent faults; 3. To slow down the deterioration process of components and extend their service life.
Was this review help?
14
0
Share
HopeRose
09/16/25 4:44am
I just completed the 25,000-kilometer maintenance for my car. Changing the engine oil and filter is absolutely something you can't delay—it's crucial for protecting the engine. Don't forget to check the air filter too; too much dust buildup can affect fuel efficiency and make the car smell odd. Rotating the tires is a must, otherwise uneven wear could lead to premature replacement. I also checked the tire pressure myself—around 2.3 is normal. Don't overlook the brake pads; replacing them when they're thin saves money and ensures safety. Top up the windshield washer fluid to avoid being caught off guard in the rain. A minor maintenance might cost a few hundred bucks, but it can extend your car's lifespan by several years. I recommend developing a regular maintenance habit—don't wait until a major repair empties your wallet.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What to Do When a Car Won't Start?

Each attempt to start the car should not exceed 5 seconds. If the car doesn't start within 5 seconds, release the key and try again. Avoid holding the key in the start position continuously if the car fails to start. If the car doesn't start after three consecutive attempts, it's advisable to wait for half a minute before trying again. This is because the starting current is very high and can potentially damage the starter and wiring, as well as cause excessive instantaneous discharge from the battery, shortening its lifespan. Waiting for half a minute allows the battery to recover some charge. Here are additional details: Solutions: Check the starting system. The starting system's circuit generally includes the following basic components: the battery, the starter motor, and the cables connecting these parts. Additionally, the ignition switch, starter relay, solenoid coil, and the vehicle's anti-theft system are also crucial parts of the starting system.
17
1
Share

Who is the inventor of the internal combustion engine?

The inventor of the internal combustion engine is Karl Benz. Below is a detailed introduction to automotive internal combustion engines: 1. Overview: An internal combustion engine is a type of power machinery that converts the heat energy released by burning fuel directly into mechanical energy. Broadly speaking, internal combustion engines include not only reciprocating piston engines, rotary piston engines, and free-piston engines but also rotary turbine jet engines. However, the term 'internal combustion engine' typically refers to piston-type internal combustion engines. 2. Principle: A piston-type internal combustion engine mixes fuel and air, which is then burned inside the cylinder, releasing heat energy that generates high-temperature, high-pressure gas. The expansion of this gas drives the piston to perform work, and the mechanical energy is then output through a crankshaft linkage or other mechanisms to drive machinery. Common types include diesel and gasoline engines, which convert internal energy into mechanical energy by performing work to alter internal energy.
7
0
Share

What is the operating method for starting an automatic transmission car?

Automatic transmission car starting operation method is: 1. Insert the key after getting in the car, turn the key to the second gear power position for ignition, and wait for the system self-check to complete; 2. Shift the gear lever from P gear to N gear; 3. Release the brake and start the car's engine; 4. Step on the brake with your foot, shift the gear lever from N gear to D gear, release the brake and step on the accelerator to start. The driving method for automatic transmission cars is: 1. Start slowly by stepping on the accelerator, engage P gear or N gear when starting, and avoid coasting in neutral; 2. Shift back to N gear when waiting at traffic lights or during brief stops, and engage P gear when parking; 3. Do not shift into P gear while driving; 4. Ensure the vehicle is completely stopped before shifting into R gear for reversing.
15
4
Share

How to Avoid Crossing the Line in Subject Two Curve Driving?

When navigating an S-curve, there's a handy trick to remember: "Left point aligns with right line, right point aligns with left line." The left and right points refer to the front corners of the car's hood. This means when turning in a particular direction, you should use that corner of the hood to follow the opposite side's road edge line. Here's some information about Subject Two: 1. Definition: Subject Two, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skill examination. 2. Objectives: Master the basic essentials of driving operations and acquire fundamental vehicle control skills; proficiently grasp basic methods for field and road driving, develop the ability to reasonably use vehicle controls and correctly manage the vehicle's spatial position, and accurately control the vehicle's position, speed, and path.
17
2
Share

How Long Does It Take for Beginners to Drive on the Highway?

New drivers can drive alone on the highway one year after obtaining their driver's license. Those who have held a license for less than one year must be accompanied by a licensed driver with at least three years of experience when driving on the highway. Below is some information about driving on the highway with temporary license plates: 1. Temporary Plates for Cross-Administrative Regions: Vehicles with these temporary plates can travel across provinces without any issues, whether driving within the province or to other provinces, and there's no need to worry about highway travel. Temporary plates for cross-provincial travel are distinctly different in color from those for non-cross-provincial travel, with the former featuring a brown-yellow background and black text. 2. Temporary Plates for Test Vehicles: These plates are typically used only for internal test vehicles by car manufacturers or media test vehicles. There are more restrictions on driving with temporary test vehicle plates. Normally, such plates will specify restricted roads, and test vehicles may be prohibited from driving on highways and ring roads.
12
3
Share

Calculation Method of 12mis in the Automotive Industry?

In the automotive industry, 12mis refers to: the failure mode rate reflecting part durability (mid-term 12-month failure rate). A minor service at 10,000 kilometers includes engine oil and oil filter, as well as the three filters: oil filter, air filter, and fuel filter. At 20,000 kilometers, the service involves replacing the engine oil, oil filter, air filter, and cabin air filter, along with some routine inspections. Below is an introduction to car maintenance: 1. Introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean and in good technical condition, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.