What maintenance should be done after a car has driven 20,000 kilometers?

3 Answers
MacAna
07/29/25 11:35pm
For a car that has driven 20,000 kilometers, the following maintenance should be performed: 1. Change the engine oil and oil filter. 2. Replace the air filter and cabin air filter. 3. Inspect the tire surface and air pressure. 4. Check the engine oil level. 5. Clean the throttle body and fuel injectors. 6. Perform brake maintenance. More information about car maintenance is as follows: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. The maintenance cycle is set when the vehicle leaves the factory. After a certain number of kilometers, a "wrench" symbol will appear to remind the driver to perform maintenance in time. Typically, the maintenance cycle for a car is every 5,000 to 8,000 kilometers, while the factory-set cycle is usually slightly longer than 8,000 kilometers.
Was this review help?
16
2
Share
HavenFitz
08/16/25 2:34am
My car repair experience tells me that 20,000 kilometers is a critical milestone. At this point, the focus of maintenance is to make the car last longer. It's essential to change the engine oil and oil filter to protect internal engine lubrication and prevent high-temperature damage. Also, check the braking system to see if the brake pads are worn out—replace them if they're too thin to ensure safe braking. Rotate the tires and balance the tire pressure to avoid uneven wear. Don’t forget the air filter; a dirty one increases fuel consumption, so clean or replace it as needed. Test the battery voltage to prevent unexpected breakdowns. Clean the cabin air filter for fresh air inside. A small reminder: check the levels of coolant and brake fluid to prevent leaks. After all this, the car will run as smoothly as new.
Was this review help?
16
3
Share
Expand All
Gabrielle
10/19/25 2:57am
I just completed the 20,000 km maintenance for my car, and it feels amazing! After changing to new engine oil, the engine runs much quieter. They also checked the braking performance, especially the thickness of the brake pads, to ensure no issues during emergency stops. The tire pressure was adjusted to the standard value, and the tires were rotated for even wear. The cabin air filter was replaced as well, so now there's no weird smell inside. The battery test showed it's in good condition, avoiding potential summer heat problems. All lighting systems were inspected—headlights and taillights must be functional. The whole process didn't take much time, but it gives you peace of mind on the road.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What is the fuel consumption per 100 kilometers for the Bluebird?

The Bluebird currently has 2 models on sale. The 2021 1.6L CVT Xuan Cool Edition, equipped with a 122 horsepower engine, has an NEDC fuel consumption of 5.2L per 100 kilometers. The 2021 1.6L CVT Zhilian Zhiku Edition, also equipped with a 122 horsepower engine, has an NEDC fuel consumption of 5.3L per 100 kilometers. The fuel tank capacity of the Bluebird is 50L. The distance that can be covered with a full tank of fuel is as follows: 2021 1.6L CVT Xuan Cool Edition: 50/5.2*100=961km. 2021 1.6L CVT Zhilian Zhiku Edition: 50/5.3*100=943km. Vehicle fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion. Heavier vehicles also consume more fuel due to the need for greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine control unit may command higher RPMs to warm up the engine, further increasing fuel consumption.
5
1
Share

What is the reason for no response when charging a phone wirelessly in a BMW 530?

The reasons for no response in Mercedes-Benz wireless charging include a dead battery, starter failure, onboard computer malfunction, loose battery terminals, etc. The car's wireless charging feature includes a charging pad on the center console where you simply place your phone to charge it. More information on wireless charging is as follows: 1. Wireless charging: Also known as non-contact power transmission, this is an applied new technology that offers the superiority and convenience of wireless technology. 2. Working principle: It primarily stems from electromagnetic induction, utilizing the electromagnetic induction between a pair of coils to achieve charging. Compared to charging via a data cable, using wireless charging technology in the car saves space inside the vehicle. When your phone needs charging, you only need to place it on the charging pad. It's worth mentioning that wireless charging technology also addresses safety hazards such as charger leakage and power loss.
14
3
Share

What Causes Incorrect Wiper Blade Positioning?

Incorrect wiper blade positioning is caused by damage to the wiper motor reset circuit. Here are some precautions for using wiper blades: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. You can sprinkle alcohol on a towel and wipe the surface of the wiper blade. Cleaning once a month can improve the wiper blade's performance. 2. Check the rubber: If the wiper blade makes unusual noises while operating, the rubber may be aging or cracked. If the wear is not severe, you can use sandpaper to smooth out rough spots on the surface. 3. Avoid sunlight: Park the car in a shaded area, such as a garage, where it is not exposed to direct sunlight. Summer is particularly harsh on cars. Wiper blades are rubber products, and exposure to sunlight will only accelerate aging. 4. Refill fluid: Avoid simply adding water to the windshield washer fluid reservoir, as this is not conducive to the long-term maintenance of the windshield and wiper blades. To ensure the longevity of the components, always use proper windshield washer fluid. Refill the washer fluid in a timely manner to be prepared for unexpected needs.
1
1
Share

What is the structure of an airbag?

The airbag system consists of an integrated airbag module comprising the airbag and inflator (gas generator), a collision sensor system that detects impacts and sends deployment signals to the airbag module, and wiring harnesses that transmit signals from the sensors. The driver's airbag is stored within the steering wheel pad. Therefore, if the steering wheel is labeled with "SRS" or "Airbag," it indicates the vehicle is equipped with an airbag. When the car experiences a high-speed frontal collision within a certain angle, the collision sensor mounted at the front of the vehicle and the safety sensor located in the middle of the car detect the sudden deceleration. This signal is transmitted within 0.01 seconds to the airbag system's control unit. After analysis and confirmation, the control unit immediately triggers the electrical igniter (squib) inside the airbag, causing it to explode—a process that typically takes about 0.05 seconds. Once the igniter is triggered, solid nitrogen particles rapidly vaporize, generating a large volume of nitrogen gas that inflates the airbag. With strong force, the airbag bursts open the cover on the steering wheel and fully deploys. This creates a "cushion" in front of the occupants. When they impact the airbag, the internal nitrogen gas is compressed and escapes through small holes in the airbag, thereby reducing the impact force and preventing injury to the occupants.
13
3
Share

Is 8 L/100km Fuel Consumption High?

Whether 8 L/100km fuel consumption is considered high depends on the vehicle model, fuel-saving technology, and specific driving conditions. Here are detailed factors affecting fuel consumption: 1. Vehicle Condition: Besides regular cleaning, pay attention to the vehicle's overall state with scheduled maintenance and timely repairs. 2. Driving Habits: Poor driving habits waste fuel imperceptibly, such as carrying unnecessary loads, driving with windows open at high speeds, or aggressive acceleration/deceleration. 3. Road Conditions: Urban driving consumes approximately 20% more fuel than test track conditions, primarily due to frequent stops/starts, traffic lights, and gear shifting.
11
5
Share

What is the difference between AT and MT off-road tires?

Here are the specific differences between AT and MT off-road tires: 1. Features: The negative effect of AT tire design is reduced road performance and increased noise, but durability and traction on unpaved surfaces are improved. MT tires facilitate slow mud discharge or high-speed mud throwing when driving in mud, making it easier to increase traction on some harsh surfaces, but they produce loud noise when driving on roads. 2. Application: MT tires are more suitable for off-road vehicles, with strong grip and off-road capability, while AT tires are all-terrain tires suitable for most terrains.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.