What maintenance items are required for the third car service?

3 Answers
KendraDella
07/29/25 4:39am
The maintenance items required for the third car service are as follows: 1. Replace the engine oil and oil filter. If the oil and filter are not replaced in time, the oil will deteriorate over time, which can easily lead to severe wear in the engine and other parts. Whether it's a new car or an older car that has been used for several years, regular maintenance of the engine oil and oil filter is required every 10,000 kilometers. 2. Clean or replace the air filter. If the car is driven for a long time in areas with a lot of dust, the replacement interval for the air filter should be shortened. For vehicles driven under normal conditions, the air filter should be replaced approximately every 10,000 kilometers. 3. Check the brake pads. Checking the brake pads is an essential item, especially after every 10,000 kilometers of driving. The brake pads will inevitably experience some wear, and their thickness will naturally decrease. Moreover, brake pads have a certain service life, and regular checks can ensure the safety of the driver.
Was this review help?
16
1
Share
TheoLynn
08/12/25 5:18pm
The third maintenance is usually done after driving the car for over a year or 10,000 kilometers, involving several key projects to ensure smooth and safe operation. I feel that changing the oil and filter is the most basic—don't skimp on small expenses only to face major repairs later. Additionally, tire rotation is crucial; even wear can make the car more stable and fuel-efficient. Checking the brake discs and pads is also essential, as excessive wear can be unsafe. Don’t forget to inspect the windshield wipers to avoid poor visibility during rain. The air filter might need replacement if it's clogged with dust, protecting the engine from premature aging. I recommend bringing the owner’s manual to the repair shop, as different models have different requirements—don’t be tricked into unnecessary services. Regular maintenance extends the car's lifespan and saves money, so I treat it as a small habit every time.
Was this review help?
11
1
Share
Expand All
StMadelyn
10/03/25 3:46am
As a hands-on car owner, I focus on key areas to save costs during my third maintenance. First, changing the engine oil and filter is a must—it's the engine's protective shield. Other tasks, like replacing the air filter, I DIY for simplicity and cost savings. I also rotate the tires myself, checking pressure and adjusting balance. Don't forget the brake test—slow response means early repairs to prevent accidents. Spark plugs may need inspection or replacement in some cars at this stage. I don't blindly follow upsells like system flushes, saving where possible. Keeping detailed maintenance records also boosts resale value—a smart long-term investment.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

Will Using Shampoo to Wash a Car Damage the Paint?

In the absence of car wash soap, shampoo can be used to wash a car when diluted with water, as it produces rich foam and contains a high amount of active agents. Although shampoo is not highly acidic, frequent use is not recommended as it can cause some damage to the car paint over time, and it is also relatively costly. More relevant information is as follows: 1. Car Paint: Car paint contains oily substances, including car wax. Alkaline cleaners can easily damage the car paint. Unlike laundry detergent, dish soap, or body wash, shampoo is weakly acidic and causes minimal damage to the car. 2. Car Wash Soap: For washing your car yourself, it is best to use professional car wash soap, especially those with water-based ingredients. Professional car wash soap has a neutral pH, which does not erode the car's surface. If it contains water wax, it can also provide a nourishing and maintenance effect while washing the car, ensuring that frequent washing does not damage the car paint.
5
3
Share

What Causes a Hard Clutch Pedal in Small Cars?

Automobile clutch pedal feeling hard is caused by: a malfunction in the clutch pressure plate. Solution: If the car's clutch pressure plate is faulty, it is necessary to promptly visit the car's 4S store or a repair shop to inspect or replace the clutch pressure plate, which can resolve the issue of a hard clutch pedal. Additional information: 1. Introduction to a hard clutch pedal in cars: Mainly due to faults in the clutch friction plate, clutch pressure plate, or release bearing. These components are consumable parts, and if they are faulty or severely worn, they can cause the clutch pedal to feel excessively heavy. Often, a clutch that is too hard or difficult to press is caused by these components. 2. Recommendation: It is best to have it inspected at a professional 4S store or repair shop, as different transmissions may be equipped with different types of clutches. If the clutch release bearing is stuck or damaged, or the clutch pressure plate is damaged, the car's clutch pressure plate and clutch friction plate should be replaced in a timely manner. A worn clutch disc can also make the pedal feel heavier.
16
4
Share

What are the reasons for the shaking during cold start of BMW 5 Series?

The reasons for the shaking during cold start of BMW 5 Series are: 1. Excessive carbon deposits inside the engine, leading to an overly lean air-fuel mixture during cold start, causing shaking; 2. Mechanical failures such as ignition coils, spark plugs, or fuel injectors; 3. Low oil pressure or cylinder pressure, resulting in insufficient power; 4. Poor fuel quality; 5. Damaged or excessively dirty idle control valve; 6. Intake manifold leakage; 7. Damaged engine mounts or rubber pads; 8. Oxidized or low-grade engine oil. Taking the 2021 BMW 525li as an example, it is a mid-to-large-sized 4-door 5-seater sedan with a body size of 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm. This car is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 290 N·m.
4
1
Share

Why is the Baojun 360 air conditioner not cooling?

The reasons why the Baojun 360 air conditioner is not cooling are as follows: 1. Refrigerant leakage: The refrigerant in the air conditioning system has completely leaked, resulting in no refrigerant, so the air conditioner does not cool. 2. Internal damage to the air conditioning pump: This prevents the cooling effect from starting. Generally, a damaged air conditioning pump will produce abnormal noises. 3. The condenser fins are too dirty: This causes the pressure and temperature in the air conditioning system to be too high, and the air conditioning pump stops working, so the air conditioner does not cool. Relevant information about car air conditioners is as follows: 1. Car air conditioner: It refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air in the compartment, providing a comfortable riding environment for passengers, reducing the driver's fatigue, and improving driving safety. The air conditioning device has become one of the indicators to measure whether a car is fully functional. 2. Structure: It generally includes a cooling device, a heating device, and a ventilation device. This combined device makes full use of the limited space inside the car, with a simple structure and easy operation.
8
5
Share

Is it okay to park in P gear without engaging the handbrake?

P gear parking still requires engaging the handbrake, otherwise it may cause damage to the transmission. When parking on a flat road, there is not much difference whether you engage the handbrake first or shift to P gear first. However, if parking on a slope, it is best to engage the handbrake first and then shift into P gear to reduce the burden on the car's transmission gears. Below is an introduction to the P gear: 1. P gear is the most common gear in automatic transmission models, usually located at the front position of the gearshift console, in front of the R gear. Its purpose is to lock the axle when the car is stationary on a slope. 2. The direct function of shifting into P gear is parking. When temporarily parking on a level road, shifting into P gear puts the car's transmission in neutral operation, completely interrupting the power transmission between the engine and the output shaft. The driver does not need to turn off the running engine during short waits. Additionally, the P gear has a wheel lock device, so even for long-term parking, the driver does not need to engage the handbrake.
6
3
Share

Can Brake Pads Be Replaced by Yourself?

Brake pads can be replaced by yourself, but it requires some time and effort. When you notice that the brake pads have become thinner, the brakes produce unusual noises, the brake pedal feels lighter, or braking becomes less effective, it's time to replace the brake pads. When replacing brake pads, those on the same axle should be replaced together to ensure even braking force on both sides. Below are the steps for replacing brake pads yourself: 1. To replace the brake pads, you need to lift the car and remove the tire; 2. Remove the caliper bolts, open the brake caliper, and take out the old brake pads; 3. Push the brake piston back in, then install the new brake pads; 4. Reinstall the brake caliper, tighten the caliper bolts to the specified torque without over-tightening, then reinstall the tire; 5. After replacing the brake pads, press the brake pedal a few times to eliminate the gap between the brake pads and the brake disc, allowing the brake piston to reset. Then, check if the brake fluid pump is functioning properly. Once confirmed, the brake pad replacement is complete.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.