What maintenance items are required at 35,000 kilometers?

2 Answers
VonLucy
07/25/25 3:16am
At 35,000 kilometers, replace engine oil and oil filter, replace air filter, clean oil passages, perform wheel alignment, and replace fuel filter. Below are the detailed maintenance instructions: 1. First maintenance: The first maintenance typically requires replacing engine oil and oil filter at 5,000 kilometers. At 10,000 kilometers, replace engine oil, oil filter, air filter, clean oil passages, perform lubrication system protection, and wheel alignment. At 15,000 kilometers, replace engine oil and oil filter. 2. Long-distance maintenance: At 20,000 kilometers, replace engine oil and oil filter, replace air filter, clean throttle body, clean fuel injectors, and clean oil passages. At 25,000 kilometers, replace engine oil and oil filter. At 35,000 kilometers, replace engine oil and oil filter, replace air filter, clean oil passages, perform wheel alignment, and replace fuel filter.
Was this review help?
8
0
Share
LeCourtney
08/10/25 4:55pm
I've been driving for many years, and the 35,000-kilometer maintenance is quite crucial. Generally, the focus should be on changing the engine oil and oil filter, as they are fundamental to engine lubrication and prevent wear. Next, check the air filter—replace it if it's dirty, otherwise, fuel consumption may increase. The tires should also be rotated to ensure even wear and extend their lifespan, while checking the tire pressure for safety. The braking system must be inspected for brake pad thickness and brake fluid level; if there are any unusual noises or the pedal feels soft, address it immediately. Additionally, check the coolant for leaks or top it up to prevent overheating. At this mileage, the spark plugs might need replacement, as worn plugs can cause ignition issues and affect performance. It's also worth taking a look at the chassis and suspension, such as checking for oil leaks in the shock absorbers. After handling these routine items, the car will run much smoother and save on future repair costs. It's advisable to refer to the owner's manual, as requirements may vary slightly between different models. With proper maintenance, you can embark on long trips with peace of mind.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

How to Steer the Wheel When Pulling Over?

The method for steering the wheel when pulling over is as follows: After entering the rightmost parking lane, align the vehicle to maintain a 30cm distance from the curb. When the right one-third of the car's front aligns with the edge line of the road, it indicates that the right side of the vehicle is approximately 30cm from the road edge. Alternatively, you can use the wiper to judge the distance. When the position of the left wiper's rivet coincides with the road edge line, the right side of the vehicle is also about 30cm from the edge line. Relevant information about the car steering wheel is as follows: 1. Function: Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. 2. Correct Grip: If the steering wheel is viewed as a clock face, the correct hand position is to place the left hand between the 9 and 10 o'clock positions and the right hand between the 3 and 4 o'clock positions. In the event of a collision, this posture is more conducive to supporting the body.
20
3
Share

Can a Beijing-registered car be transferred to Hebei?

Beijing-registered cars can be transferred to Hebei. Most cities in Hebei require out-of-province used cars to meet both China V emission standards and be within two years of age for local registration. For used car transfers, local admission standards must first be met. Currently, China IV standard vehicles can be transferred nationwide. Below is relevant information about used car transfers: 1. Required documents: The original owner needs to provide the vehicle registration certificate, driving license, ID card, and other documents. The buyer needs to provide an ID card; if from another province, a residence permit or temporary residence permit is required (not needed if transferring to the buyer's registered residence). 2. File transfer: The vehicle files must be extracted from the original local vehicle management office and then registered at the new location. 3. Vehicle evaluation: The vehicle must first undergo an evaluation for transfer, with the evaluation fee generally being 1%-2% of the assessed vehicle value. The vehicle must meet China V emission standards to apply for registration and license plate issuance in Hebei. Both parties and the vehicle must go together to the Beijing vehicle management office where the car is registered to apply for the transfer procedure. After obtaining the temporary license plate and vehicle files, the buyer can then apply for registration and license plate issuance at the Hebei vehicle management office. During the transfer, all vehicle violations and accidents must be resolved, and all vehicle documents must be complete.
12
2
Share

Does the Highlander Burn Engine Oil?

The Highlander does indeed burn engine oil, approximately 4.5 liters every 10,000 kilometers. You can use an engine oil burning repair agent to quickly repair engine wear and eliminate symptoms caused by wear such as oil burning, blue smoke emission, and excessive noise. Oil burning and oil consumption are two different concepts, as follows: 1. Oil Consumption: This refers to the inevitable residual oil on the combustion chamber walls during the engine piston's operation in the cylinder, which gets burned. As driving time increases, the oil level will decrease accordingly, which is a normal phenomenon of oil consumption. 2. Oil Burning: This refers to engine oil entering the combustion chamber and participating in combustion along with the air-fuel mixture. To determine if oil burning is occurring, you can check for blue smoke from the exhaust pipe, observe if the car lacks power during acceleration, or monitor the oil dipstick. As long as the oil level remains between the highest and lowest marks between two maintenance intervals, it is considered normal.
10
2
Share

What does 50cc mean?

50cc refers to the engine displacement of 50 milliliters or 50 cubic centimeters. The maintenance methods for car engines are as follows: 1. Regularly change the oil and oil filter: The quality of any grade of lubricating oil will change during use. To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be moderate (generally up to the upper limit of the oil dipstick). 2. Regularly clean the radiator: Rust and scale can restrict the flow of coolant in the cooling system, reducing heat dissipation and causing the engine to overheat, even leading to engine damage. Therefore, the radiator should be cleaned regularly to remove rust and scale. 3. Regularly clean the crankcase: During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Hence, the crankcase should be cleaned regularly to maintain the cleanliness of the engine interior.
8
0
Share

What are the causes of a faulty driver's door contact switch in Volkswagen vehicles?

If the door contact switch malfunctions, disconnect and reconnect the battery cable. If this doesn't resolve the issue, replace the door contact switch. Below are specific details about door contact switches: 1. Installation Location: Mounted in the door gap area, pressed by the door frame when closed and released when opened. Its function is to detect the door's open/closed status and provide status signals to the vehicle's control circuit. It can be used to control features such as reading lights, dashboard door status displays, and door open warning lights. 2. Structure: The car door structure is relatively complex, containing numerous components. 3. Function: The door and body are connected by hinges and limiters - the former serves a fixing purpose while the latter restricts the opening angle of the door. Strong impacts can easily damage these two components, causing permanent deformation and displacement of the door.
16
4
Share

What are the five major types of automobile overall layout?

The five major types of automobile overall layout are as follows: 1. Front-engine, rear-wheel drive (FR): The engine is longitudinally mounted at the front of the car and connected longitudinally to the transmission, driving the rear wheels via a driveshaft. Most early cars adopted the FR layout, which is now primarily used in mid- to high-end sedans. Its advantage lies in the even distribution of axle load, meaning a balanced front-to-rear weight ratio, resulting in better handling stability. 2. Front-engine, front-wheel drive (FF): The engine is transversely mounted at the front, directly driving the front wheels through the transmission, eliminating the need for a driveshaft and thus resolving the cabin floor issue inherent in FR layouts. This configuration is called the FF layout. FF is currently the most widely used layout for micro, small, and medium-sized sedans. 3. Rear-engine, rear-wheel drive (RR): This layout was widely used in early microcars due to its compact structure, lacking both a heavy driveshaft and complex front-wheel steering and drive mechanisms. Its drawback is the heavier load on the rear axle, leading to oversteer tendencies opposite to FF layouts, meaning poor stability during high-speed cornering and a propensity for skidding. Few sedans still use the RR layout today. 4. Mid-engine, rear-wheel drive (MR): This layout places the engine between the front and rear axles. Its greatest advantage is obviously the even axle load distribution, resulting in neutral handling characteristics. The downside is that the engine occupies cabin space, reducing space utilization and practicality. Therefore, MR is mostly adopted by sports cars that prioritize handling performance. 5. Four-wheel drive: Regardless of whether the engine is front-mounted, mid-mounted, or rear-mounted, four-wheel drive can be implemented. Since all four wheels are powered, traction utilization is maximized, but its notable drawbacks include increased weight and space consumption. Additionally, power loss rates are higher compared to single-axle drive systems. Four-wheel drive was once exclusive to off-road vehicles, but in recent years, with the development and application of limited-slip differential technology, 4WD systems can now precisely distribute torque among the wheels. Consequently, an increasing number of high-performance sports cars are adopting four-wheel drive to enhance handling.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.