What maintenance items are essential at 30,000 kilometers?

1 Answers
McFelicity
07/29/25 4:02pm
Essential maintenance items for a vehicle at 30,000 kilometers include oil change, oil filter replacement, air filter replacement, fuel filter replacement, throttle body cleaning, and spark plug replacement. Here are the details: 1. Engine Oil: Changing the engine oil and oil filter is mandatory at 30,000 kilometers. Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of the oil is significantly shortened, and its performance deteriorates, which over time fails to protect the engine. The oil filter prevents impurities from mixing with the oil, which can cause oxidation, leading to sludge and clogging the oil passages. 2. Throttle Body Cleaning: Throttle body cleaning is unnecessary before 30,000 kilometers. If the service advisor at a 4S shop or repair shop recommends this service at 10,000 or 20,000 kilometers, you can directly refuse it.
Was this review help?
18
4
Share
More Forum Discussions

What are the reasons why a Mercedes-Benz won't start?

Mercedes-Benz won't start for the following reasons: Dead battery: The trunk is not completely closed, and the trunk light stays on, causing the battery to drain. Spark plugs cannot ignite: Spark plugs themselves are easily damaged, and short circuits in high-voltage lines can cause the spark plugs to fail to ignite. Another reason is that poor-quality spark plugs can also prevent normal starting. Starting circuit failure: When starting, there is only a slight "click" sound and no further response, which is caused by a stuck starter relay. At this time, simply pressing the tail of the electromagnet to force it to move forward can connect the starting circuit, thereby starting the engine.
12
3
Share

What Causes the Lack of Power and Dull Acceleration in the 8th Generation Accord?

The reasons for the lack of power and dull acceleration in the 8th Generation Accord are as follows: Insufficient Fuel Pump Pressure: If there is no water or insufficient water level in the gateway, the fuel pump pressure cannot reach the required level, leading to lack of power and dull acceleration. Incorrect Program Matching: The EMT automatic transmission only realizes the need to accelerate when the throttle is applied, and then releases the clutch. If the computer is not properly adjusted and the program matching is incorrect, sudden acceleration after deceleration can cause the transmission controller to respond sluggishly. To match the engine speed and torque output, as well as the vehicle speed, it forcibly downshifts, causing the clutch to engage too abruptly and quickly, resulting in lack of power and dull acceleration.
3
5
Share

What does non-load-bearing body mean?

Non-load-bearing body refers to a chassis form where the frame carries the entire vehicle body, with the engine, suspension, and body all mounted on the frame. The frame has screw holes for fixing the body and bases for mounting springs. There are two main types of vehicle bodies: load-bearing and non-load-bearing. A non-load-bearing body means the vehicle has a rigid frame, commonly known as the chassis and beams. The engine and powertrain are directly connected to the frame via suspension, and the frame is connected to the wheels through front and rear suspension devices. This type of body has very strong torsional resistance and high height, so it is generally used in buses, trucks, and off-road vehicles.
5
0
Share

What are the reasons for the engine warning light in the Fit?

The reasons for the engine warning light in the Fit include: 1. Poor combustion state; 2. Engine knocking; 3. Poor fuel quality; 4. Dirty engine cylinder interior with accumulated carbon deposits; 5. The computer cannot obtain engine data. Taking the Fit 2021 1.5L CVT Trend Edition as an example: The car is equipped with a 1.5L 131 horsepower L4 naturally aspirated engine, with a maximum power of 96 kilowatts and a maximum torque of 155 Nm. The body dimensions of the Fit 2021 1.5L CVT Trend Edition are 4109mm in length, 1694mm in width, and 1537mm in height, with a wheelbase of 2530mm.
12
2
Share

Why does the 14th-generation Sylphy have lights on during the day?

14th-generation Sylphy has lights on during the day because it is equipped with daytime running lights (DRLs). Here are the details about DRLs: Energy-saving effect of DRLs: Daytime running lights are primarily designed for daytime driving illumination. Unlike regular low-beam headlights, they consume only 15% of the energy of conventional low beams. For DRLs using LED technology, the energy-saving effect is even more significant, with energy consumption as low as 10% of that of standard low-beam headlights. Operation of DRLs: When the engine is started, the daytime running lights automatically turn on and gradually increase in brightness to attract the attention of other motorists, cyclists, and pedestrians on the road. When night falls and the driver manually switches on the low-beam headlights, the daytime running lights automatically turn off.
9
4
Share

What are the dimensions of the Fit?

The dimensions of the Fit are 4065mm in length, 1695mm in width, and 1525mm in height, with a wheelbase of 2530mm. The Fit is a hatchback launched by GAC Honda, featuring a geometric front MacPherson independent suspension and a high-rigidity rear torsion beam semi-independent suspension. Both front and rear suspensions are equipped with stabilizer bars, delivering excellent response performance and handling stability. The Fit is equipped with advanced technologies such as a 1.5L direct-injection DOHC iVTEC engine, CVT continuously variable transmission, Idle Stop engine energy-saving automatic start-stop system, VSA vehicle stability control system, and a three-mode rearview camera display system.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.