What maintenance is required for a sedan at 100,000 kilometers?

2 Answers
BeauDella
09/05/25 6:18am
At 100,000 kilometers, the main maintenance for a sedan includes changing the engine oil and oil filter. Below is a detailed introduction to car maintenance: Engine Oil and Oil Filter Replacement: The primary function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove various impurities from the engine oil, ensuring the lubrication system operates normally. The oil filter should be replaced along with the engine oil during an oil change. Under normal circumstances, a car requires maintenance every 5,000 kilometers. Air Filter Replacement: The air filter's function is to filter the air before it enters the cylinders, removing impurities such as dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The gasoline filter generally needs replacement after driving 20,000 to 25,000 kilometers. Spark Plug Replacement: Spark plugs are consumable parts and should be replaced every 20,000 kilometers. Additionally, components such as brake fluid, transmission fluid, battery, throttle body, fuel injectors, and brake pads are all part of the inspection items during routine maintenance. Their maintenance and servicing depend on usage conditions.
Was this review help?
2
5
Share
Percy
09/17/25 6:38am
When my car reaches 100,000 kilometers, I need to perform a comprehensive major maintenance. Changing the engine oil and oil filter is essential to ensure smooth lubrication and extend the engine's lifespan. Checking the braking system is crucial, including the brake pad thickness and brake fluid level, as safe driving depends on it. Inspect tire wear and consider rotation or replacement, otherwise, high-speed driving may become unstable. The coolant and antifreeze should also be replaced to prevent engine overheating and potential failures. Don’t forget to check the suspension shock absorbers and timing belt, as aging components can lead to strange noises or the risk of snapping. Worn-out spark plugs may increase fuel consumption, so it’s best to replace them together. Regular maintenance can keep the car running smoothly for tens of thousands of kilometers without breaking down, saving you the hassle and cost of a roadside tow.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

Does keeping AUTOHOLD on consume more fuel?

Using the AUTOHOLD function does consume a bit more fuel (you can observe this by comparing with the tachometer), but keeping the gear in D and pressing the brake for a long time will increase the temperature of the transmission oil, making it prone to deterioration and aging. Here is some related information about AUTOHOLD: 1. Auto Hold: The English name for Auto Hold is AUTOHOLD. It is a function that automatically replaces the handbrake. After activating this function, for example, when stopping at a red light, it is equivalent to not needing to pull the handbrake. This function is particularly suitable for uphill and downhill driving as well as frequent stops and starts. 2. Distinguishing from Electronic Parking Brake: It is absolutely necessary to distinguish the electronic parking brake from the Auto Hold system because the implementation of the Auto Hold function is often not done using the electronic parking brake, although it may seem very similar to previous ideas and operations.
11
5
Share

What does the Rescue 1212 sign mean?

Rescue 1212 sign indicates the highway emergency rescue phone number. Here are precautions for highway driving: 1. Pre-drive vehicle inspection: Before driving, the driver should conduct a comprehensive check of the vehicle, with emphasis on various fluids, tires, braking system, etc. If fluids are insufficient, replenish them to proper levels promptly; tires should be carefully inspected with foreign objects removed from tread grooves. 2. Adjust mirrors: When rearview mirrors are in optimal position, they allow better observation of vehicle sides and rear, noting that left and right mirror adjustment methods differ slightly.
18
4
Share

Is it a violation to make a left turn in a U-turn lane?

It is considered running a red light violation and will be captured by surveillance cameras. 1. Motor vehicles can make U-turns at locations where there are no signs or markings prohibiting U-turns or left turns. 2. At locations where U-turns are permitted, and there are neither dedicated U-turn traffic signals nor other regulatory U-turn traffic signs, motor vehicles can make U-turns during any traffic light phase. 3. If there are traffic signs explicitly indicating U-turns during red or green lights, U-turns should be made during the specified signal phase. 4. When making a U-turn, do not obstruct other vehicles or pedestrians proceeding normally. 5. For special circumstances that result in violating traffic signals, verification and correction can be conducted according to law enforcement procedures. If the red light violation was not caused by the driver's own fault, in addition to preliminary corrections through legal officer reviews, appeals can also be resolved through administrative reconsideration or administrative litigation.
18
1
Share

Do I need to change my vehicle license when moving to a new address?

There is no need to replace the motor vehicle license, but you must file a record with the vehicle management office at the registration location. According to the "Motor Vehicle Registration Regulations": 1. Article 17: For a registered motor vehicle, if the owner's residence moves within the jurisdiction of the vehicle management office or if the owner's name (or organization name) or contact information changes, a record must be filed with the vehicle management office at the registration location. If the name or number of the owner's identity document changes, an application for record filing can be submitted to the vehicle management office at the registration location. 2. Notes: If the engine number or vehicle identification number becomes unclear or damaged due to wear, corrosion, accidents, or other reasons, an application for record filing can be submitted to the vehicle management office at the registration location. The motor vehicle owner must submit identity documents, the motor vehicle registration certificate, and the vehicle license.
19
5
Share

What are the regulations for vehicle film wrapping and color changing?

The regulations for vehicle film wrapping and color changing are as follows: 1. Film Wrapping: The new 'Technical Specifications for the Safety of Motor Vehicles in Operation' has come into effect. The new national standard stipulates that the visible light transmittance of the front windshield and the areas of other windows used for the driver's line of sight (referring to the areas used by the driver to observe rearview mirrors while driving) must be greater than or equal to 70%. No mirror-like reflective sunshade films are allowed on any window glass. 2. Color Changing: The overall color of the vehicle film wrapping must not exceed three colors. (If the car emblem is also wrapped in color, although the area is small, it is still included). Electroplated series color-changing films and all reflective fabric color-changing films cannot be registered on the vehicle license. The newly introduced laser series color-changing films this year can be registered on the vehicle license. Partial film wrapping that does not exceed 30% of the total vehicle area generally has no impact.
6
2
Share

What Causes Unstable Idle and Stalling in a Van?

Unstable idle and sudden stalling can be caused by the following reasons: 1. Circuit failure: This may be due to low-voltage power failure causing the engine to stall. In this case, you should primarily check the ignition and starter switch, as well as the fuse box. A short circuit in the low-voltage circuit can cause intermittent stalling. Inspect the low-voltage lines in the vehicle. 2. Component failure: This issue is usually related to the ignition coil, capacitor, or electronic ignition module. The vehicle may start initially but stall after a while, then restart and stall again. 3. Fuel system failure: This could be due to a damaged fuel pump, ruptured fuel line, clogged carburetor inlet, or an empty fuel tank. In such cases, the vehicle may still be able to restart, but with great difficulty. Problems with the ignition system or the engine's overheating anti-explosion system can also cause stalling.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.