What maintenance is required for a car at 60,000 kilometers?

3 Answers
Taylor
07/28/25 11:24am
The maintenance items for a car after driving 60,000 kilometers include changing the engine oil, replacing the brake fluid, replacing the three filters, changing the transmission fluid, and inspecting the tires. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. Here are the maintenance tasks required for a car at 60,000 kilometers: Changing the engine oil. After driving 60,000 kilometers, the car can use higher-viscosity and more protective engine oil, such as 0W-40, to ensure better engine performance. Replacing the brake fluid. Generally, the brake fluid should be replaced around 40,000 kilometers. Replacing the brake fluid ensures the braking system works more effectively. Additionally, during the 60,000-kilometer maintenance, the wear level of the brake pads should be checked. If the wear is severe, the brake pads should also be replaced. Replacing the three filters. These include the air filter, oil filter, and cabin air filter. The three filters are car components that are prone to contamination and wear, so they should be cleaned or replaced during each maintenance session. Changing the transmission fluid. Generally, manual transmission vehicles should have their transmission fluid replaced every 50,000 kilometers, while automatic transmission vehicles can go up to 80,000 kilometers. During major maintenance, the transmission fluid should be inspected. Inspecting the tires. Check whether the tire wear is normal. If the wear is severe, the tires should be replaced promptly. Spark plugs: Ignite the air-fuel mixture to generate power. They also seal the spark plug holes to maintain cylinder pressure. They should be inspected every 40,000 kilometers. Battery: The battery usually needs replacement every 4-5 years, depending on usage habits. If the car's electrical functions (e.g., radio) are frequently used while the engine is off, the battery may wear out faster. Car maintenance generally includes the following inspection or replacement tasks: checking the coolant level; inspecting the brake and clutch fluid levels; verifying the power steering fluid level; checking for oil leaks at pipe connections; examining the battery fluid and windshield washer fluid levels; inspecting the tension and wear of belts (generator, air conditioning, water pump, and power steering pump); ensuring all lights (headlights, daytime running lights, turn signals, brake lights, reverse lights, and fog lights) are functional; checking tire pressure and wear, tightening lug nuts to the specified torque, adjusting tire pressure to the recommended level, and rotating tires if necessary; and verifying that the vehicle’s exhaust emissions meet standards. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle upkeep. Modern car maintenance mainly covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more.
Was this review help?
8
5
Share
LaBriella
08/11/25 4:28pm
I remember that when a car reaches 60,000 kilometers, a major maintenance service should be performed comprehensively to keep the vehicle in good condition. The main tasks include changing the engine oil and oil filter, as the old oil has degraded and not replacing it can affect engine lubrication, potentially leading to increased noise or even damage. At the same time, the air filter and fuel filter should be replaced to ensure clean air intake and fuel lines, preventing blockages. The spark plugs need to be replaced with new ones, as worn spark plugs with reduced ignition performance can increase fuel consumption and even cause starting difficulties. Transmission fluid should also be changed, especially for automatic transmission models, as failure to do so may result in rough shifting and reduced lifespan. The braking system should be inspected, including brake pad thickness and brake fluid, to ensure reliable braking and prioritize safety. Additionally, coolant and timing belts will be checked to prevent potential issues. In summary, timely maintenance can reduce the likelihood of breakdowns and allow the car to run smoothly for more years.
Was this review help?
19
0
Share
Expand All
DiMaggie
09/28/25 5:28am
My car just passed 60,000 kilometers, and I was quite surprised by the time-consuming maintenance items during the service. The basics included replacing the three filters—oil filter, air filter, and fuel filter—which must be renewed to prevent the engine from sucking in debris and getting damaged. The spark plugs also needed replacement; the mechanic said the old ones could cause inaccurate ignition, leading to engine shaking and fuel wastage. The transmission fluid had to be changed, especially for automatic cars, as neglecting it could cause transmission failure and costly repairs. Brake inspection was essential, including checking the brake pad wear—if too thin, they needed replacement to prevent accidents. The air conditioning system was cleaned, and the filter was replaced to eliminate odors and ensure fresh airflow. The tires were balanced and rotated to avoid uneven wear and extend their lifespan. After the full service, the car felt quicker to start, smoother to handle, and much safer to drive.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

Can a tire with a 55 aspect ratio be replaced with a 60?

Tire with a 55 aspect ratio can be replaced with a 60. The steps for changing a tire are: 1. Park the vehicle, turn off the engine, and engage the handbrake to prevent sliding; 2. Loosen the screws in a diagonal pattern; 3. Lift the vehicle to a certain height; 4. Remove the screws and take off the tire; 5. Install the new tire and tighten the anti-theft screws in a diagonal pattern; 6. Lower the vehicle and tighten the screws and nuts. Things to note when changing tires include: 1. Check the expiration date, inventory should not exceed 3 years; 2. Observe the tread pattern and color; 3. Check if the joint between the tread and sidewall is smooth; 4. Avoid mixing tires with different structures and sizes.
14
2
Share

What is the Venueir car from Venucia?

There is no car model named Venueir. Only a brand with similar letters exists, which is Venucia. Venucia originates from Greek, meaning the Morning Star. In Chinese, it is called Dongfeng Venucia, symbolizing the first ray of light that heralds the dawn and guides the future direction. Additional Information: Venucia Motors: The Venucia brand was established on September 8, 2010, and launched its first model, the D50, in April 2012. Venucia Motors is a key component of Dongfeng Group's "Big Self-owned" strategy and became officially independent in 2017. About the Brand: The current brand logo of Venucia was introduced on its 7th anniversary. The early logo featured a blue background with a large white star surrounded by four smaller five-pointed stars (three blue and one white).
16
0
Share

How to Install One-Key Start in Lavida?

Lavida one-key start installation method is: 1. Install the induction device on the door handle; 2. Disassemble the instrument panel and door panel, and take out the wiring harness inside; 3. Solder the wiring of the one-key start device. It is recommended to go to a professional modification shop for installation. The car one-key start is part of the smart car device, which is a button device that realizes a simplified ignition process and can also be used to turn off the engine. Lavida is the first A-class car independently developed by Shanghai Volkswagen. The waistline design of the body is relatively sharp, while retaining the side profile similar to the Octavia. The advantage of this design is that it facilitates the entry and exit of rear seat passengers. The 2610mm wheelbase also ensures a comfortable rear seating space for Lavida.
11
0
Share

What is the appropriate position to adjust the rearview mirror?

Adjust the rearview mirror so that the horizon line is positioned at two-thirds of the mirror's height, and then adjust the edge of the car body to occupy one-fourth of the mirror's image. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, side, and lower areas of the car while seated in the driver's seat. For the convenience of the driver's operation, to prevent traffic safety accidents, and to ensure personal safety, all countries require that cars must be equipped with rearview mirrors, and all rearview mirrors must be adjustable in direction. For example, the adjustment method for the center rearview mirror is to move it left or right until the left edge of the mirror just cuts off the right ear of your reflection in the mirror. This means that under normal driving conditions, you cannot see yourself in the center rearview mirror. The up and down adjustment involves positioning the distant horizon in the center of the mirror.
2
2
Share

What are the reasons for the BMW 3 Series air conditioning not cooling?

First, check the refrigeration cycle system of the air conditioning to see if there is any gas leakage, blockage by foreign objects, or the need to add refrigerant. If the air conditioning is not cooling, the initial step is to inspect whether any components of the air conditioning system are blocked, as obstructions in the filter, condenser, or refrigerant lines can reduce the cooling efficiency. Below are the reasons why BMW air conditioning may not cool: 1. Insufficient refrigerant in the air conditioning system / The refrigerant pressure switch detects low pressure or the pressure switch is faulty. 2. Air conditioning compressor failure; 3. Air conditioning control unit failure; 4. Air conditioning function switch failure; 5. Open/short circuit in the air conditioning system wiring harness;
4
5
Share

Which brand does the CFMOTO 250SR belong to?

The CFMOTO 250SR is a model under the CFMOTO brand. Relevant information is as follows: 1. Power: The CFMOTO 250SR has a 0-100 km/h acceleration time of 7.5 seconds, with a top speed phenomenon of 146 km/h and a GPS-measured top speed of 136 km/h. The CFMOTO 250SR is equipped with a 249CC single-cylinder water-cooled four-stroke engine, which has a maximum power output of 20.5 KW and a maximum torque of 22 Nm. 2. Structure: The CFMOTO 250SR uses LED light clusters, with headlights that provide excellent illumination at night. The high-end version of the model features a full-color instrument panel, while the low-end version does not come with a full-color instrument panel.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.