What maintenance does a six-year-old car need?

2 Answers
MacMiranda
07/24/25 7:56pm
A six-year-old car requires the following maintenance: 1. Replace the engine oil, oil filter, and clean the air filter; check whether the generator belt and wiper blades are damaged; 2. Check whether the levels of various fluids are normal; 3. Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 4. Inspect the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Check whether all switches and lights in the car are working properly. Car maintenance precautions include: 1. Make an appointment in advance; 2. Record any faults or questions encountered while driving and inform the staff during the maintenance registration.
Was this review help?
7
3
Share
Poppy
08/11/25 10:56am
Having driven for over a decade, I fully understand the importance of maintenance after six years. Engine oil and filters must be changed regularly, preferably every six months. The braking system requires thorough inspection, including brake fluid and pads, as wear increases after six years, and degraded braking performance can pose safety risks. The timing belt is critical—many vehicles approach replacement time around six to seven years; if it snaps, the engine could be ruined. Replace tires when treads wear thin, especially during rainy seasons when traction is poor. Check battery aging for cold-start capability to avoid roadside breakdowns. Don’t forget the cabin air filter—it affects respiratory health. A comprehensive diagnostic can extend lifespan and save costs.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

Where is the tire pressure reset for Emgrand GL?

Emgrand GL's tire pressure reset is set in the tire pressure display option. The setting method is as follows: Press the MENU button on the turn signal lever, select the tire pressure display item in the mileage fuel information menu, press the Set button, the driver information center will display the tire pressure relearn, select Yes, press the Set button, and the display of tire pressure learning enabled will reset. The Emgrand GL is a compact car under Geely Emgrand, with a length, width, and height of 4725 mm, 1802 mm, and 1478 mm respectively, and a wheelbase of 2700 mm. In terms of suspension, the front suspension of the Emgrand GL is a MacPherson independent front suspension with a stabilizer bar, and the rear suspension is a torsion beam non-independent suspension. In terms of power, the Emgrand GL is equipped with a turbocharged engine, with a maximum horsepower of 141 hp, a maximum torque of 235 Nm, and a maximum power of 104 kW.
1
2
Share

How to Operate High and Low Beam Headlights?

Operation method of high and low beam headlights: The control for high and low beam headlights is located on the lever on the left side of the steering wheel. Pushing it to the middle position activates the low beam, while pushing it to the first or third position activates the high beam. There are levers on both sides of the steering wheel; the right one is mostly for controlling the windshield wipers, and the left one is primarily for controlling the lights, including switching between high and low beams and controlling the turn signals. High and low beam headlights are lighting devices used for nighttime driving, enhancing driving safety. The low beam is designed for short-distance illumination, featuring a wide coverage area but a short range, with non-adjustable focus. Beyond its focal point, the light disperses, illuminating a larger area of nearby objects. The high beam adjusts the intensity of the light based on the distance of the filament. Positioned at its focal point, the high beam emits parallel light rays that are more concentrated and brighter, capable of illuminating distant and high objects.
19
0
Share

How to Identify if a Car is a Stock Vehicle When Buying?

Methods to identify if a car is a stock vehicle when buying: 1. Check the manufacturing date of the car. Every car has a nameplate near the door, which clearly indicates the manufacturing date of the vehicle. If it was manufactured within the last three months, it is considered a new car. If the time is longer, it is a stock vehicle. 2. Look at the time symbols on the car glass. These markings represent the manufacturing time of the glass. If they are inconsistent, it means one piece has been replaced. 3. Check the wear level of the tires. New tires have a layer of tire hairs when they leave the factory, which are easily worn off. When picking up the car, check if all four tires have tire hairs. 4. Use your finger to touch the inside of the exhaust pipe. If there are obvious black stains, it means the car has been driven for a while and might be a test drive vehicle. If the color is light, there is no need to worry.
15
5
Share

What is the RPM when a new car is just started?

The RPM when a new car is just started is around 1000. Here is some information about the RPM when a new car is just started: 1. Engine: At the moment of engine start-up, the RPM is approximately around 1000. The resistance during start-up varies depending on the technical condition of the engine. A new engine that hasn't undergone proper break-in has relatively "tighter" fits between moving parts, resulting in greater start-up resistance. 2. RPM difference: Drivers can hardly distinguish the RPM difference between a new car and a well-broken-in car during start-up, as the gap is small unless precise measurements are taken. The starting performance of a car engine is evaluated based on the start-up time. If it can start successfully within 5 seconds, it is considered to have good starting performance.
5
4
Share

Can an automatic transmission license deduct points from a manual transmission license?

An automatic transmission license cannot deduct points from a manual transmission license. Points deduction knowledge: 1. The relationship between C2 and C1 in points deduction: The automatic transmission driver's license is C2, while the manual transmission is C1. The level is insufficient, so it cannot help deduct points for a C1 driver's license; however, C1 can help deduct points for C2, meaning a higher-level license can deduct points for a lower-level one, but not vice versa. 2. Documents required for points deduction: The person deducting points must present their driver's license, ID card, and the violating vehicle's registration certificate. For commercial vehicles, a professional qualification certificate is also required. 3. Points deduction notice: If a vehicle is detained by traffic police due to a traffic violation, the violator must present the vehicle detention certificate, their driver's license, and the vehicle's registration certificate within 15 days to the law enforcement station for processing.
18
5
Share

What Are the Reasons for Clutch Noise in Cars?

There are two main reasons for clutch noise. Below is a detailed explanation of the two causes of clutch noise: 1. Release Bearing Noise: The release bearing is a ball bearing that disengages power during gear shifting. It endures certain pressure during the clutch engagement and disengagement process, which may lead to severe wear over time. Additionally, since the clutch is located between the engine and the transmission, it operates under high temperatures, causing the grease in the release bearing to gradually deplete. When the grease is insufficient, dry friction occurs between the balls and the bearing housing, resulting in clutch noise. 2. Clutch Disc and Pressure Plate Bonding Due to Rust: When temperatures are high, the bonding of the clutch disc and pressure plate due to rust becomes more noticeable. However, this phenomenon is relatively rare. It is the result of forced separation between the clutch disc and pressure plate. In cases of severe rust, forced separation becomes difficult, and the transmission must be disassembled for repair.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.